@article { author = {}, title = {-}, journal = {Sharif Journal of Mechanical Engineering}, volume = {25}, number = {50 - ویژه مهندسی شیمی}, pages = {2-2}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {}, abstract = {-}, keywords = {-}, title_fa = {فهرست فارسی مقالات}, abstract_fa = {-}, keywords_fa = {-}, url = {https://sjme.journals.sharif.edu/article_20468.html}, eprint = {https://sjme.journals.sharif.edu/article_20468_412683ad8df4a9f45e2afbc868da4c06.pdf} } @article { author = {Amiri, F. and Yaghmaei, S. and Samie, S.}, title = {MODELING THE GROWTH KINETIC OF YEAST BBRC-9026 ON PHENOL}, journal = {Sharif Journal of Mechanical Engineering}, volume = {25}, number = {50 - ویژه مهندسی شیمی}, pages = {3-8}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {}, abstract = {In this study, phenol-degrading microorganisms were isolated from an activated sludge system that had been acclimated with synthetic phenolic wastewater for six months. After investigating the performance of each strain on phenol, in the presence and absence of co-substrate, the best-isolated strain was chosen. In the next phase, the best-isolated microorganism's growth on different phenol concentrations was examined in a shaking flask scale, at different times. The kinetic constants obtained by modeling the growth kinetic of the best isolated strain, according to the Haldane model, and with the help of Matlab 6.5, were µm=0.592 (1/h), Ks= 920.3 (mg/L), and KI= 115.62 (mg/L). This kinetic model is a good tool for simulation and scale-up in designing an industrial wastewater bio-treatment process.}, keywords = {kinetics model,haldone’s equation,Inhibition,phenel,activated slodge system}, title_fa = {مدل‌سازی سینتیک رشد مخمر ۹۰۲۶−BBRC در معرض فنل}, abstract_fa = {در این تحقیق ریزاندامگان تجزیه‌کننده‌ی فنل از لجن فعال سازگار با فنل، که در مدت شش‌ماه با پساب سنتتیکِ حاوی فنل در سیستم لجن فعال سازگار شده است، جداسازی و خالص‌سازی شده و پس از بررسی عملکرد هر سوش در معرض فنل، در حضور و غیاب سوبسترای کمکی، بهترین سوش میکروبی انتخاب می‌شود. به‌منظور مدل‌سازی سینتیک رشد سلولی، بهترین سوش در معرض غلظت‌های مختلف فنل در ظروف لرزنده قرار گرفته و رشد آن به‌همراه مقدار فنل باقی‌مانده در زمان‌های مختلف تا تجزیه‌ی کامل فنل اندازه‌گیری می‌شود. سپس با کمک مدل سینتیکی هالدن و داده‌های به دست آمده، مدل‌سازی در محیط $ MATLAB, 6.5 $ انجام، و ثابت‌های سینتیکی رشد سلول برابر با $m‌u_{m}=0.592,(1/h)$، $K_{s}=920.3,(m‌g/L)$ و $K_{I}=115.62,(m‌g/L)$ برآورد می‌شود. مدل سینتیکی تعیین‌شده برای شبیه‌سازی فرایند تصفیه‌ی زیستی و بزرگ‌نمایی مقیاس، در طراحی واحد صنعتی بسیار مناسب است.}, keywords_fa = {مدل سینتیکی,معادله‌ی هالدن,بازدارندگی,فنل,سیستم لجن فعال}, url = {https://sjme.journals.sharif.edu/article_5707.html}, eprint = {https://sjme.journals.sharif.edu/article_5707_b79271d02e72cd6c77373a807ef241ba.pdf} } @article { author = {Tooyserkani, Z. and Shayegan, J. and Sadeghi, A.}, title = {STUDY OF ORGANIC POLLUTANTS IN TEHRAN GROUND WATER}, journal = {Sharif Journal of Mechanical Engineering}, volume = {25}, number = {50 - ویژه مهندسی شیمی}, pages = {9-14}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {}, abstract = {In this study, the Total Organic Carbon, Nitrate and Petroleum hydrocarbons of Tehran's groundwater have been measured. According to this study, the average TOC was 9.3 mg/L, which is much above standard. For the Nitrate, although there were few samples below standard, samples above 45 mg/L were numerous, with a maximum of 133 mg/L. The Petroleum Hydrocarbon content of most of the wells was negligible, nevertheless there were two wells indicating MTBE content, which shows contamination from the underground tanks of nearby gas stations. In conclusion, Tehran groundwater needs special treatment to be used as a drinking water.}, keywords = {Groundwater,Tehran,organic pollution,nitrate pollution,petroleum pollution and wastewater disposal system}, title_fa = {بررسی آلودگی آلی آب‌های زیرزمینی شهر تهران}, abstract_fa = {آب‌های زیرزمینی یکی از مهم‌ترین منابع تأمین آب شرب در تهران هستند. ازآنجا که در سال‌های کم‌آبی ۵۰٪ آب مصرفی تهران از طریق همین آب‌ها تأمین می‌شود، کیفیت آنها از اهمیت زیادی برخوردار است. در این تحقیق، با بررسی موقعیت چاه‌های تهران، مناسب‌ترین آنها با درنظر گرفتن نزدیکی به جایگاه های عرضه سوخت انتخاب و در سال ۸۶ نمونه‌برداری از آنها انجام شد. با اندازه‌گیری آلودگی‌های آلی آبهای زیرزمینی تهران مشخص شد که غلظت کل کربن آلی (T‌O‌C) در تمام چاه‌های نمونه‌برداری شده بیش از حد مجاز و در محدوده‌ی ۶٫۵ تا ۱۲٫۵ میلی‌گرم در لیتر در تغییر بود. با بررسی آلودگی هیدروکربنی نمونه‌ها مشخص شد که اکثر چاه‌های مورد آزمایش عاری از این آلودگی هستند. میزان نیترات موجود در چاه‌های منتخب نیز اندازه‌گیری و بیشترین مقدار آن در حدود ۱۳۳ میلی‌گرم در لیتر محاسبه شد. با توجه به هماهنگی بین داده‌های T‌O‌C، نیترات و نیز بررسی نتایج به دست آمده از دستگاه G‌C_M‌S که هیچ‌گونه آلودگی هیدروکربنی را در اکثر نمونه‌ها نشان نمی‌داد، وجود منبع فاضلابی برای آلودگی آلی آب‌های زیرزمینی تهران گزارش داده شد. این در حالی است که در دو نمونه‌ی گرفته شده از مناطق یافت‌آباد و سیدخندان رفتار متفاوتی مشاهده شد که نشان‌گر نشت بنزین از مخازن ذخیره‌ی جایگاه‌های سوخت بالادست این دو محل است. در نهایت، راهکارهایی به‌منظور کنترل و حذف آلودگی پیشنهاد شده است.}, keywords_fa = {آب‌های زیرزمینی,تهران,آلودگی آلی,آلودگی نیترات,آلودگی نفتی و سیستم دفع فاضلاب}, url = {https://sjme.journals.sharif.edu/article_5708.html}, eprint = {https://sjme.journals.sharif.edu/article_5708_1df1bfc1080e8364ffcace5088aad1ce.pdf} } @article { author = {Mokhtari, Sh. and Vatani, A. and Farooji, N. and Eslamimanesh, V.}, title = {OPTIMIZATION OF OXIDATIVE COUPLING OF METHANE OVER PEROVSKITE CATALYST AND OCM KINETICS MODELING BY GENETIC ALGORITH}, journal = {Sharif Journal of Mechanical Engineering}, volume = {25}, number = {50 - ویژه مهندسی شیمی}, pages = {15-24}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {}, abstract = {In recent years, there is a strong incentive to study and develop processes that would convert methane into more valuable chemical & petrochemical products. To this end, in this research, kinetic studies on the oxidative coupling of methane at temperatures of 725, 750, 775, 785°C and a methane/oxygen ratio of 2, 3, 3.5, 4 and 4.5, have been conducted in a tubular fixed bed reaction, using perovskite titanate as the reaction catalysts; optimum operating conditions have been proposed. Correlation of the kinetic data has been performed with the models proposed and their parameters have been optimized. Modeling is based on random searching algorithms, of which GA is one. Six models have been selected among the common kinetic models; then, the selected models have been regressed with experimental data obtained from the ‍‍Catatest system by GA, in order to obtain optimized parameters. One of the selected models (Santamaria) had good agreement with experimental data. The Arrhenius parameters of this model have been obtained by linear regression. The Marquardt algorithm has also been used in this research and its results compared with GA. It should be noted that the Marquardt algorithm is sensitive to first guesses and there is a possibility of trapping in the relative minimum.}, keywords = {Genetic Algorithm,OCM kinetic,perovskite}, title_fa = {بهینه‌سازی فرایند جفت‌شدن اکسایشی متان (OCM) با کاتالیست پروسکایت و مدل‌سازیسینتیکی سطرجدید فرایند توسط الگوریتم ژنتیک}, abstract_fa = {در تحقیق حاضر سینتیک فرایند جفت شده اکسایشی متان در یک ریزواکنشگر بستر ثابت و با استفاده از کاتالیست پروسکای، با خوراکی شامل متان و اکسیژن و با نسبت های مختلف بررسی گردید. شرایط بهینه فرایند، دمای $750-785^c‌i‌r‌c C$،نسبت متان به اکسیژن: ۲ و سرعت فضایی گاز در دبی خوراک m‌l/M‌i‌n۱۶۰m‌i‌n$^{-1}$:۱۰۰ به‌دست آمد. همچنین مدل‌های سینتیکی کلی این فرایند بررسی و پارامترهای بهینه آن با کمک الگوریتم ژنتیک، تعیین شدند. در مقاله حاضر از میان مدل‌های سینتیکی کلی فرایند، شش مدل انتخاب و توسط الگوریتم ژنتیک در برازش با نتایج آزمایشی به‌دست آمده از سیستم آزمایشگاهی در شرایط مختلف فرایندی تحلیل و پارامترهای بهینه تعیین شدند. در میان این مدل‌ها، مدل سانتاماریا با دقت بالاتری بر روی نتایج آزمایش برازش شده است. همچنین الگوریتم لونبرگ ــ مارکوارت نیز در تحلیل و مقایسه با الگوریتم ژنتیک مورد استفاده قرار گرفت که نتایج حاصل نشان می دهند در الگوریتم مذکور برخلاف الگوریتم ژنتیک، امکان گرفتار شدن در دام کمینه نسبی وجود دارد.}, keywords_fa = {الگوریتم ژنتیک,سینتیک O‌C‌M,کاتالیست پروسکایت}, url = {https://sjme.journals.sharif.edu/article_5709.html}, eprint = {https://sjme.journals.sharif.edu/article_5709_e696125e9065baed7d5ffc14d8389863.pdf} } @article { author = {Aghamiri, Seyyed Foad and Sadraee, S.H.}, title = {MMP DETERMINATION BY PARACHOR METHOD AND COMPARISON WITH ANALYTICAL METHOD}, journal = {Sharif Journal of Mechanical Engineering}, volume = {25}, number = {50 - ویژه مهندسی شیمی}, pages = {25-33}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {}, abstract = {The minimum miscibility pressure (MMP) is a key concept in EOR by using miscible gas injection. In this report, MMP will be calculated by analytical and Parachor methods and the results are compared with experimental data. In the analytical method, initial and injection tie lines are determined by using negative ash calculations for both reservoir oil and injection gas. These tie lines will be corresponded with cross tie lines. MMP is the pressure where the length of one tie line (from initial to injection tie lines) equals zero. In the second method, MMP is calculated according to this fact; that interfacial tension between two phases goes to zero at completely miscibility. The interfacial tension is calculated by the Parachor model. Analytical calculations are performed by PR, SRK and MNM EOS. Results of analytical and Parachor methods are compared with the experimental data of slim tube and vanishing interfacial tension (VIT) methods. Results show superior agreement between calculations and experimental data. Our results indicate that MMP will be reduced significantly, due to the presence of intermediate components of reservoir oil in the injection gas and the similarity between reservoir oil and injection gas.}, keywords = {EOR,miscible injection,MMP Displacement,EOS,parachor model}, title_fa = {استفاده از روش پاراکر در تعیین حداقل فشار امتزاجی و مقایسه‌ی نتایج با روش تحلیلی}, abstract_fa = {حداقل فشار امتزاج‌پذیری $(M‌M‌P)$ مفهومی کلیدی در طراحی و اجرای فرایند ازدیاد برداشت به‌روش تزریق امتزاجی است. در این تحقیق محاسبات $M‌M‌P$ با استفاده از دو روش تحلیلی و پاراکر انجام، و نتایج حاصله با داده‌های تجربی مقایسه می‌شوند. در روش تحلیلی محاسبات تبخیر ناگهانی منفی برای نفت مخزن و گاز تزریقی انجام و خط‌بست‌های اولیه و تزریقی که توسط خط‌بست های متقاطع به یکدیگر مرتبط می‌شوند، تعیین می‌شوند. حداقل فشار امتزاج‌پذیری، فشاری است که براثر آن طول یکی از خط‌بست‌های نفت اولیه تا تزریقی صفر شود. در روش دوم با توجه به تعریف $M‌M‌P$ به‌عنوان پایین‌ترین فشاری که در آن کشش سطحی بین دو فاز صفر می‌شود، این کمیت براساس محاسبه‌ی کششِ بین سطحی با مدل پاراکر تعیین می‌شود. محاسبات به‌روش تحلیلی با استفاده از معادلات حالت $P‌R$ و $M‌N‌M$ انجام می‌شوند. نتایج به دست آمده از مدل تحلیلی با روش آزمایشگاهی لوله قلمی، و نتایج حاصل از مدل پاراکر با روش امحاء کشش سطحی $(V‌I‌T)$ مقایسه می‌شود. بررسی انجام‌شده درمورد تأثیر ترکیب گاز تزریقی نیز نشان‌گر آن است که حضور اجزاء میانی در گاز تزریقی می‌تواند در کاهش $M‌M‌P$ مؤثر باشد.}, keywords_fa = {ازدیاد برداشت نفت,تزریق گاز امتزاجی,حداقل فشار امتزاجی,جابه‌جایی,معادله حالت,مدل پاراکر}, url = {https://sjme.journals.sharif.edu/article_5710.html}, eprint = {https://sjme.journals.sharif.edu/article_5710_49f2036657becb36e67e82eea6364d5a.pdf} } @article { author = {ghorban, S.A. and Radpour, S. R. and Abolghasemi, H. and Mousavian, M.A.}, title = {VOLUME FLOW RATE AND BED DEPTH EFFECTS OF CARBON ACTIVE RESIN IN BENZOIC ACID ADSORPTION}, journal = {Sharif Journal of Mechanical Engineering}, volume = {25}, number = {50 - ویژه مهندسی شیمی}, pages = {35-39}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {}, abstract = {The recovery of benzoic acid, as an intermediate and additive component in chemical industries, is a convectional process. Also, benzoic acid is usually removed as a pollutant from wastewater streams and is treated with a fixed-bed, via physical adsorption processes, onto granular activated carbon. In this research work, wastewater is passed onto active carbon in a chromatographic glass tube and the related heat of adsorption is measured by a calorimeter. The results show that this adsorption is physical, because the amount of heat of adsorption is less than the minimum chemical adsorption. In addition, in the present research work, the bed depth effect of resin and the feed volumetric flow rate have been studied at laboratory scale to determine optimum conditions. Finally, based on experiments and their results, the optimum conditions are determined at a 6 cm bed depth with a granular carbon active resin 30-36 mesh, 0.75 ml/min volume flow rate and a chromatographic glass tube with an inner diameter of 9.5 mm.}, keywords = {Adsorption,Activated carbon,benzoic acid,volumetric flowrate,bed depth of resin}, title_fa = {‌بررسی اثرات شدت جریان حجمی و عمق بستر رزین کربن فعال در جداسازی اسید بنزوئیک}, abstract_fa = {جداسازی اسید بنزوئیک که به‌عنوان نگه‌دارنده یا ماده‌ی افزودنی میانی در صنایع شیمیایی مورد نیاز است، و اغلب در تصفیه‌ی پساب‌های صنعتی به‌دلیل اثرات مضر زیست‌محیطی آن با وجود مقادیر کم اسید بنزوئیک در پساب صنعتی، به‌روش جذب سطحی توسط کربن فعال کفایت می‌کند. در این روش پساب مورد نظر را از روی بستری از کربن فعال در لوله‌های شبیه به رنگ‌نگاری (کروماتوگرافی) عبور می‌دهند. با توجه به مقدار گرمای جذب که با کالری‌متر اندازه‌گیری می‌شود، گرمای جذب سطحی کم‌تر از حداقل گرمای جذب شیمیایی است، و لذا جذب سطحی از نوع فیزیکی اعلام می‌شود. در این آزمایش‌ها تأثیرات عمق بستر رزین و میزان شدت حجمی جریان خوراک به‌منظور دست‌یابی به وضعیت بهینه‌ی فرایند جذب سطحی در اندازه‌های آزمایشگاهی مورد تحقیق و بررسی دقیق واقع شد. در نهایت شرایط بهینه با عمق بستر ۶ سانتی‌متر با شدت جریان حجمی ۰٫۷۵ میلی‌لیتر در دقیقه و با جاذب کربن فعال غربال شده در اندازه‌های ۳۶−۳۰ مش و لوله‌ی رنگ‌نگاری با قطر داخلی ۹٫۵ میلی‌متر حاصل شد.}, keywords_fa = {جذب سطحی,کربن فعال,اسید بنزوئیک,شدت جریان حجمی,عمق بستر رزین}, url = {https://sjme.journals.sharif.edu/article_5711.html}, eprint = {https://sjme.journals.sharif.edu/article_5711_a230dd480da82485b7e795739a56fcce.pdf} } @article { author = {Delijani, E. and pishvaie, S.M. R.}, title = {UNSTEADY SOLUTION OF THE LINEAR AND NONLINEAR PRESSURE EQUATION IN SINGLE-PHASE OIL RESERVOIRS, USING THE GREEN ELEMENT METHOD}, journal = {Sharif Journal of Mechanical Engineering}, volume = {25}, number = {50 - ویژه مهندسی شیمی}, pages = {41-45}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {}, abstract = {In this study, numerical solutions to one dimensional transient linear and nonlinear oil flow in both homogeneous and heterogeneous media are achieved, based on the newly developed Green Element Method (GEM). GEM is a new numerical method based on a singular theory of the boundary element method. However, utilizing the discretization feature of finite element methods leads to forming a sparse and banded global matrix, which is easier to solve.Solution procedure in this method commences by formation of free space green function and conversion of original partial differential equation and implementation of boundary conditions. By applying GEM, some examples of linear and nonlinear flow are solved and the results are compared with the available analytical solution. The comparison shows good agreement between them.}, keywords = {oil reservoir simulation,green element method,Finite Element Method,boundary dlement method}, title_fa = {حل عددی معادلهی گذرای خطی و غیرخطی فشار در مخازن نفتی تکفاز با روش اجزاء گرین}, abstract_fa = {در این مطالعه، حل عددی معادلات خطی و غیرخطی جریان یکبعدی نفت در محیطهای همگن و ناهمگن با روش اجزاء گرین بررسی شده است. روش نوظهور اجزاء گرین مبتنی بر نظریهی انتگرال تکین اجزاء مرزی است، اما بهدلیل استفاده از ویژگی گسستهسازی حوزهی حل روش اجزاء محدود، دارای ماتریس پراکنده و محدود است که حل آن راحتتر است. حل در این روش با به دست آوردن تابع بدون مرز گرین و تبدیل معادله دیفرانسیل موردنظر به معادله انتگرالی آغاز شده و سپس با گسسته سازی معادله انتگرالی، تشکیل معادلات المانی و در نهایت سرهمسازی این معادلات به همراه اعمال شرایط مرزی پایان میپذیرد. با استفاده از این روش، پس از حل مثالهایی از جریان خطی و غیرخطی، نتایج حاصله با جوابهای تحلیلی در دسترس مقایسه شد.}, keywords_fa = {شبیه سازی مخازن نفت,روش اجزاء گرین,روش اجزاء محدود,اجزاء مرزی}, url = {https://sjme.journals.sharif.edu/article_5712.html}, eprint = {https://sjme.journals.sharif.edu/article_5712_3b092c35c54fdca31710403400dd1511.pdf} } @article { author = {Ganji, Hamid}, title = {Deep desulfurization reaction kinetics for hydrogen-gasoline cutting oil}, journal = {Sharif Journal of Mechanical Engineering}, volume = {25}, number = {50 - ویژه مهندسی شیمی}, pages = {47-53}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {}, abstract = {Pdydhyy adverse impacts of oil pollution with serious and destructive on the environment and human health. Since one of the main sulfur compounds Lvdhknndhhay oil refinery and one of the most important are the objectives in this study a systematic review in order to determine the reaction kinetics of hydrogen desulfurization) HDS diesel oil cut using a commercial catalyst was NHS $ -204 $. Reactive tests in a tiny bed temperature Qtrhyy $ 360-380 ^ degree C $, pressure and velocity space bar 70-55) LHSV (h $ ^ {-1} $ 2-0.5 done. According to the desulfurization especially derivatives of Tyvfnha Dybnzvtyvfny Bnzvtyvfny and is difficult and comes in deep desulfurization, so here the reaction kinetics (HDS) for the article Dybnzvtyvfn and sulfur can form model was determined. The results indicate that the degree of reaction in the feed gasoline HDS Dybnzvtyvfn is equal to 1.4. HDS reaction activation energy was determined as the kcal/mol15.}, keywords = {Hydrogen desulfurization,Kinetics,Catalyst,Dybnzvtyvfn,oil cuts}, title_fa = {سینتیک واکنش گوگردزدایی عمیق هیدروژنی برای برش نفتی گازوئیل}, abstract_fa = {آلودگی‌های نفتی پدیده‌یی نامطلوب با تأثیرات جدی و مخرب بر روی محیط زیست و سلامتی انسان است. از آنجا که ترکیبات سولفوردار یکی از مهم‌ترین آلوده‌کننده‌های مواد نفتی و یکی از اهداف مهم پالایش به شمار می‌روند، در این تحقیق یک بررسی نظام‌مند به‌منظور تعیین سینتیک واکنش گوگردزدایی هیدروژنی )H‌D‌Sبرش نفتی گازوئیل با استفاده از کاتالیست تجاریِ N‌H‌S$-204$ انجام شد. آزمایش‌ها در یک ریز واکنش‌گر بستر قطره‌یی در دمای$360-380^d‌e‌g‌r‌e‌e C$، فشارb‌a‌r ۷۰−۵۵ و سرعت فضایی )L‌H‌S‌V(h$^{-1}$ ۲−۰٫۵ انجام شد. با توجه به این که گوگردزدایی از تیوفن‌ها و به‌خصوص مشتقات بنزوتیوفنی و دی‌بنزوتیوفنی دشوار است و در گوگردزدایی عمیق مطرح می‌شود، لذا در اینجا سینتیک واکنش (H‌D‌S) برای ماده‌ی گوگرددار دی‌بنزوتیوفن و به‌صورت مدل توانی تعیین شد. نتایج حاصله حاکی از آن است که درجه‌ی واکنش H‌D‌S دی‌بنزوتیوفن در خوراک گازوئیل برابر ۱٫۴ است. انرژی فعال‌سازی واکنش H‌D‌S نیز برابر k‌c‌a‌l/m‌o‌l۱۵ تعیین شد.}, keywords_fa = {گوگردزدایی هیدروژنی,سینتیک,کاتالیست,دی‌بنزوتیوفن,برش‌های نفتی}, url = {https://sjme.journals.sharif.edu/article_5713.html}, eprint = {https://sjme.journals.sharif.edu/article_5713_962b5285d263a99488ccc6dc87f9d93c.pdf} } @article { author = {}, title = {-}, journal = {Sharif Journal of Mechanical Engineering}, volume = {25}, number = {50 - ویژه مهندسی شیمی}, pages = {56-58}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {}, abstract = {-}, keywords = {-}, title_fa = {چکیده انگلیسی مقالات}, abstract_fa = {-}, keywords_fa = {-}, url = {https://sjme.journals.sharif.edu/article_20469.html}, eprint = {https://sjme.journals.sharif.edu/article_20469_6e39ef909002d4602663c7dc45729c67.pdf} } @article { author = {}, title = {-}, journal = {Sharif Journal of Mechanical Engineering}, volume = {25}, number = {50 - ویژه مهندسی شیمی}, pages = {58-58}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {}, abstract = {-}, keywords = {-}, title_fa = {فهرست انگلیسی مقالات}, abstract_fa = {-}, keywords_fa = {-}, url = {https://sjme.journals.sharif.edu/article_20467.html}, eprint = {https://sjme.journals.sharif.edu/article_20467_e8576b07f11cd731f22693b35be43016.pdf} }