@article { author = {Mirzakhani, A. and Asempour, A.}, title = {Investigation of Texture Intensity Effect on Deformation Behavior of Extruded Mg-0.8wt%Y Alloy under Tensile and Compressive Loading Using the Crystalline Plasticity Finite Element Method}, journal = {Sharif Journal of Mechanical Engineering}, volume = {37.3}, number = {1}, pages = {59-69}, year = {2021}, publisher = {Sharif University of Technology}, issn = {2676-4725}, eissn = {2676-4733}, doi = {10.24200/j40.2021.56291.1559}, abstract = {Magnesium alloys due to their compact hexagonal structure (HCP) usually have a yield asymmetry in tensile and compressive loadings. This is due to various active plastic deformation mechanisms under tensile and compressive loadings. Therefore, it is necessary to study the deformation behavior of magnesium alloys on the grain scale. This study focuses on the 3D Representative Volume Element (RVE) simulations of extruded magnesium alloy to investigate the effect of basal texture intensity on tensile–compressive yield asymmetry of Mg-0.8wt% Y. Polycrystalline aggregate models are built based on the theory of Voronoi diagram; then, the Slip-based crystal plasticity formulation is applied as a User Material Subroutine in ABAQUS (UMAT) to study the relationship of microstructures and stress-strain responses in Mg-0.8wt% Y alloy during tension and compression test and the results are presented. The results show that when the orientation of the grains is considered random (zero texture intensity), the activities of different deformation modes are almost the same and minimum tensile-compressive yield asymmetry happens. Also, the results reveal when all the grains are oriented in a certain direction (texture intensity 1), maximum tensile–compressive yield asymmetry occurs. Indeed, according to the Relative Activity (RA) results, in agreement with Schmid Factor (SF) results, in a strong basal texture with the intensity of 1, maximum contribution of accumulated plastic deformation is related to tensile twinning while in compressive loading, prismatic slip and contraction twinning are responsible for major plastic deformation. Therefore, due to the activation of various deformation modes in strong basal texture, the highest amount of tensile–compressive yield asymmetry occurs. The S-shape strain hardening curve which is the main characteristic of twin-dominated deformation shows a strong dependency on texture in the extruded material so that during loading at the weaker texture, s-shape hardening is no longer present due to the dominated non-basal slips in weaker texture.}, keywords = {Slip systems,tensile and contraction twinning,crystal plasticity,Schmidt Factor,basal texture}, title_fa = {بررسی اثر شدت تکسچر بر رفتار تغییر شکل آلیاژ Mg-0.8wt%Y اکسترود شده تحت بارگذاری کشش و فشار با استفاده از روش المان محدود کریستال پلاستیسیته}, abstract_fa = {آلیاژهای منیزیم معمولاً دارای عدم تقارن تسلیم در حالت کشش و فشار هستند که این عامل ناشی از سازوکارهای مختلف تغییر شکل پلاستیک فعال تحت بارگذاری‌های کششی و فشاری است. این مقاله بر روی شبیه‌سازی المان حجمی نماینده‌ی سه‌بعدی از آلیاژ منیزیم اکسترود شده تمرکز دارد تا با کمک روابط کریستال پلاستیسیته تأثیر شدت بافت پایه بر عدم تقارن تسلیم کشش ـ فشار را بررسی کند. روابط کریستال پلاستیسته مبتنی‌بر لغزش به‌صورت یک زیربرنامه در نرم‌افزار آباکوس (U‌M‌A‌T) برای شبیه‌سازی آزمون کشش و فشار بر روی R‌V‌E استفاده شده است. نتایج نشان می‌دهد زمانی که جهت‌گیری دانه‌ها به‌صورت تصادفی لحاظ شود، کمترین مقدار عدم تقارن تسلیم کشش ـ فشار و هنگامی‌که همه‌ی دانه‌ها در یک راستای خاص جهت‌گیری کنند، بیشترین میزان عدم تقارن تسلیم کشش ـ فشار رخ می‌دهد؛ این تفاوت رفتار در کشش و فشار با بررسی فعالیت عوامل مختلف تغییرشکل در بافت‌های مختلف تحلیل می‌شود.}, keywords_fa = {سیستم‌های لغزش,دوقلویی کششی و فشاری,کریستال پلاستیسیته,ضریب اشمید,بافت پایه}, url = {https://sjme.journals.sharif.edu/article_22312.html}, eprint = {https://sjme.journals.sharif.edu/article_22312_29f343d00954d1b8d370cf55e2e191d5.pdf} }