<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Sharif Journal of Mechanical Engineering</JournalTitle>
				<Issn>2676-4725</Issn>
				<Volume>41</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>06</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Design and Replacement of a Three-Stage Axial Compressor with a Centrifugal Compressor in a Gas Turbine to Enhance Performance</ArticleTitle>
<VernacularTitle>Design and Replacement of a Three-Stage Axial Compressor with a Centrifugal Compressor in a Gas Turbine to Enhance Performance</VernacularTitle>
			<FirstPage>29</FirstPage>
			<LastPage>42</LastPage>
			<ELocationID EIdType="pii">23854</ELocationID>
			
<ELocationID EIdType="doi">10.24200/j40.2025.65087.1719</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Ali</FirstName>
					<LastName>Hajilouy</LastName>
<Affiliation>Faculty of Mechanical Engineering of Sharif University of Technology, Tehran, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>MohammadReza</FirstName>
					<LastName>Khajekoolaki</LastName>
<Affiliation>Faculty of Mechanical Engineering of Sharif University of Technology, Tehran, Iran.</Affiliation>
<Identifier Source="ORCID">0009-0002-1160-4208</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2024</Year>
					<Month>09</Month>
					<Day>09</Day>
				</PubDate>
			</History>
		    <Abstract>Dynamic compressors are vital components in gas turbines and various industrial applications such as transportation, power generation, oil refineries, and petrochemical plants. The gas turbine at the Gas Turbine Laboratory of Sharif University of Technology uses a two-stage combined compressor with an axial first stage and a centrifugal second stage. This study investigates replacing the centrifugal stage with a multi-stage axial compressor to enhance turbine performance. A one-dimensional model was developed and validated against experimental data to predict compressor behavior under design and off-design conditions. Based on this analysis, a three-stage axial compressor and a new stator were designed, forming a four-stage axial configuration. Performance predictions indicate that the proposed design achieves 10.1–15.1% higher isentropic efficiency along the operating line, and at speeds above 90% of the design point, its pressure ratio surpasses that of the existing combined compressor by up to 9.4%. The results confirm that replacing the centrifugal stage with the new axial compressor is both feasible and beneficial, improving performance while reducing engine diameter.</Abstract>
			<OtherAbstract Language="FA">Dynamic compressors are vital components in gas turbines and various industrial applications such as transportation, power generation, oil refineries, and petrochemical plants. The gas turbine at the Gas Turbine Laboratory of Sharif University of Technology uses a two-stage combined compressor with an axial first stage and a centrifugal second stage. This study investigates replacing the centrifugal stage with a multi-stage axial compressor to enhance turbine performance. A one-dimensional model was developed and validated against experimental data to predict compressor behavior under design and off-design conditions. Based on this analysis, a three-stage axial compressor and a new stator were designed, forming a four-stage axial configuration. Performance predictions indicate that the proposed design achieves 10.1–15.1% higher isentropic efficiency along the operating line, and at speeds above 90% of the design point, its pressure ratio surpasses that of the existing combined compressor by up to 9.4%. The results confirm that replacing the centrifugal stage with the new axial compressor is both feasible and beneficial, improving performance while reducing engine diameter.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Axial compressor</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Gas Turbine</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Performance Improvement</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">One-dimensional modeling</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://sjme.journals.sharif.edu/article_23854_ba7f4fbe78b8a3c4618a5eaf93dce218.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
