Alemi, M. Recognizing Acceptance Level in Facial Expressions by Neural Network [37.3, Issue 2, 2021, Pages 13-20]
Alinia-ziazi, A. Minimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]
Amini Magham, M.R. Sensitivity Analysis of the Dominant Design Parameters of Supersonic Separators
for Gas Compositions [37.3, Issue 1, 2021, Pages 111-123]
Arjmand, N. Evaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]
Asempour, A. Investigation of Texture Intensity Effect on Deformation Behavior of Extruded Mg-0.8wt%Y Alloy under Tensile and Compressive Loading Using the Crystalline Plasticity Finite Element Method [37.3, Issue 1, 2021, Pages 59-69]
Asghari, M. Study the effect of suction flow control on the aerodynamic performance of a wind turbine using 2D section numerical Results [37.3, Issue 1, 2021, Pages 79-89]
Ashouri-sanjani, M. Evaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]
Assari, M.R. Simulation of a Double Slope Solar Still with Rotating External Reflector [37.3, Issue 2, 2021, Pages 21-28]
B
Barzegari, A. Minimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]
Bayareh, M. Comprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
F
Fallahi, F. Multi-objective optimization of hydraulic engine mounts vibrational behavior by non-dominated sorting genetic algorithm [37.3, Issue 1, 2021, Pages 49-58]
Farhani, S. Investigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
G
Ghaffarzadeh, S. Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
Ghasemi, B. Comprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
Ghorbanian, K. Numerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
Ghorbanian, K. Sensitivity Analysis of the Dominant Design Parameters of Supersonic Separators
for Gas Compositions [37.3, Issue 1, 2021, Pages 111-123]
H
Hashemi, M. Y. Study the effect of suction flow control on the aerodynamic performance of a wind turbine using 2D section numerical Results [37.3, Issue 1, 2021, Pages 79-89]
Hedayati-Azar, A. A review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
J
Jafarzadeh Kenari, S. Numerical modeling and geometric optimization of single-phase supersonic ejector [37.3, Issue 1, 2021, Pages 71-78]
K
Karimi, S. Simulation of a Double Slope Solar Still with Rotating External Reflector [37.3, Issue 2, 2021, Pages 21-28]
Karimian Aliabadi, S. Study the effect of suction flow control on the aerodynamic performance of a wind turbine using 2D section numerical Results [37.3, Issue 1, 2021, Pages 79-89]
Kiani, M. Simultaneous Orbit, Attitude and Albedo Parameter Estimation Using Satellite Surface Temperature Data [37.3, Issue 2, 2021, Pages 47-55]
L
Labibian, A. Simultaneous Orbit, Attitude and Albedo Parameter Estimation Using Satellite Surface Temperature Data [37.3, Issue 2, 2021, Pages 47-55]
M
Maghsoudpour, A. Minimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]
Mahbadi, H. Stress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
Meghdari, A. Recognizing Acceptance Level in Facial Expressions by Neural Network [37.3, Issue 2, 2021, Pages 13-20]
Mirjalili, M.R. Numerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
Mirzakhani, A. Investigation of Texture Intensity Effect on Deformation Behavior of Extruded Mg-0.8wt%Y Alloy under Tensile and Compressive Loading Using the Crystalline Plasticity Finite Element Method [37.3, Issue 1, 2021, Pages 59-69]
Moayyedi, M. K. Reduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]
Mohajeri, S.H. Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
N
Nabatian, N. Numerical modeling and geometric optimization of single-phase supersonic ejector [37.3, Issue 1, 2021, Pages 71-78]
Nabatian, N. Numerical investigation of the premixed V-flame stabilization and blowout [37.3, Issue 2, 2021, Pages 57-67]
Nabipour, M. Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
Nasihati Gourabi, F. Simultaneous Orbit, Attitude and Albedo Parameter Estimation Using Satellite Surface Temperature Data [37.3, Issue 2, 2021, Pages 47-55]
Nassiri Toosi, A. Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
Nazemi Ashani, M. Comprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
Nikpour, R. Stress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
P
Parvar, M. Simulation of a Double Slope Solar Still with Rotating External Reflector [37.3, Issue 2, 2021, Pages 21-28]
Pourtakdoust, S.H. Simultaneous Orbit, Attitude and Albedo Parameter Estimation Using Satellite Surface Temperature Data [37.3, Issue 2, 2021, Pages 47-55]
R
Rafiei, S. Evaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]
Reyhanian, M. Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
Sabaghzadeghan, F. Reduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]
Sadeghi, H. A review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
Sadeghian, N. Simulation of a Double Slope Solar Still with Rotating External Reflector [37.3, Issue 2, 2021, Pages 21-28]
Sadeghi Dodaran, R. Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
Salehi Neyshabouri, S. A.A. Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
Shabani, R. Multi-objective optimization of hydraulic engine mounts vibrational behavior by non-dominated sorting genetic algorithm [37.3, Issue 1, 2021, Pages 49-58]
Shahmiri, F. Application of Axiomatic Design approach to reduce coupling and repetition in the UCAV conceptual design process [37.3, Issue 2, 2021, Pages 69-79]
Shirazi, M. Numerical modeling and geometric optimization of single-phase supersonic ejector [37.3, Issue 1, 2021, Pages 71-78]
Shiriny, A. Comprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
Shooshtari, A.R. Investigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
T
Tamanaee, E. Recognizing Acceptance Level in Facial Expressions by Neural Network [37.3, Issue 2, 2021, Pages 13-20]
Tariverdilo, S. Multi-objective optimization of hydraulic engine mounts vibrational behavior by non-dominated sorting genetic algorithm [37.3, Issue 1, 2021, Pages 49-58]
Z
Zarrati, A.R. Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
