Active Flow ControlNumerical Study of the Effect of Flow Control Using Plasma Actuator on the Aerodynamic Performance of a VAWT [Volume 41, Issue 2, 2025, Pages 63-75]
Active methodsComprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
AeroacousticsOwl Aeroacoustics: Analysis of a Silent Flight [Volume 39, Issue 1, 2023, Pages 99-118]
AeroacousticsExperimental acoustic study of small horizontal axis wind turbines based on computational fluid dynamics and artificial intelligence approaches [Volume 40, Issue 2, 2024, Pages 52-63]
AeroacousticsNovel Acoustic Absorbers Based on TPMS Structures: Implementation in Axial Fan Casings and Ducted Wind Turbines [(Articles in Press)]
Aerodynamic EfficiencyNumerical and Experimental Study of a Wing Combined with Wing Grids in Low Reynolds Number Flows [38.3, Issue 2, 2022, Pages 63-75]
Aerodynamic forcesInvestigation of the local heating effect on the aerodynamic forces over a cylinder at Reynolds [Volume 39, Issue 1, 2023, Pages 69-77]
Aerodynamic PerformanceA Comparative Study of the Aerodynamic Performance and Economic Viability of H-Shape and V-Shape Wind Turbines in the Climate of Zahedan City [Volume 40, Issue 1, 2024, Pages 111-118]
AeroelasticityReliability-Based Multidisciplinary Design Optimization Under Uncertainty for Reusable Flexible Space Launcher utilizing NSGA-II [Volume 40, Issue 1, 2024, Pages 61-74]
AggregationInvestigating the Effectiveness of the Population Balance Model for Predicting Thermal Transfer Characteristics of Ice Slurry Flow within a Pipe [Volume 41, Issue 2, 2025, Pages 93-105]
Airborne wind energy system (AWES)Rotor Design And Performance Study Of An Airborne Wind Energy System With Flight Dynamics Simulator [Volume 39, Issue 2, 2023, Pages 45-56]
Aircraft conceptual designApplication of Axiomatic Design approach to reduce coupling and repetition in the UCAV conceptual design process [37.3, Issue 2, 2021, Pages 69-79]
AlignCategory Napyvstgyhay in Tvdhsng using probability neural network competitive framework [Volume 24, Issue 42, 2009, Pages 21-25]
Aluminum 1100Numerically and Experimentally Investigation of the Effect of Anisotropy and Stress Triaxiality on the Fracture Strain [Volume 39, Issue 1, 2023, Pages 27-34]
Aluminum powderEffect of vibration amplitude and temperature on the shape and size of aluminum powder produced by ultrasonic atomizer process [Volume 39, Issue 1, 2023, Pages 25-45]
Analysis of varianceFlexibility and Geometric Optimization of a New Structure for a Polymer Stent with the Finite Element Method [Volume 40, Issue 1, 2024, Pages 15-23]
Analytical solutionAnalytical solution of mass transport equation in river network [38.3, Issue 1, 2022, Pages 35-49]
Anisotropic damageNumerical and experimental analysis of anisotropic damage growth and martensitic phase change due to plastic strain at ambient temperature [Volume 40, Issue 2, 2024, Pages 97-106]
Anomaly detectionEdge-Computing-Based Anomaly Detection of Rotating Machines Using Artificial Neural Networks [Volume 41, Issue 2, 2025, Pages 33-47]
API X65Experimental determination of correction factors from Charpy impact testing of API X65 steel with varying specimen thickness [Volume 40, Issue 1, 2024, Pages 119-127]
Artificial intelligenceAttitude Determination of Geosynchronous Satellites with Sun and Earth Sensors Using Artificial Intelligence Algorithms [(Articles in Press)]
AstryvgrafykCategory Napyvstgyhay in Tvdhsng using probability neural network competitive framework [Volume 24, Issue 42, 2009, Pages 21-25]
AtomizationEffect of vibration amplitude and temperature on the shape and size of aluminum powder produced by ultrasonic atomizer process [Volume 39, Issue 1, 2023, Pages 25-45]
Attitude control of satelliteFractional Order Sliding Mode Controller (FOSMC) Design for Attitude Control of a Satellite with Coupled Rigid–Flexible Structures Using Fractional Order Transfer Function [Volume 40, Issue 2, 2024, Pages 3-14]
Attitude DeterminationAttitude Determination of Geosynchronous Satellites with Sun and Earth Sensors Using Artificial Intelligence Algorithms [(Articles in Press)]
AutoencodersEdge-Computing-Based Anomaly Detection of Rotating Machines Using Artificial Neural Networks [Volume 41, Issue 2, 2025, Pages 33-47]
Auxetic shoesComparison of experimental results between using auxetic shoe, conventional shoe and barefoot on the kinematics of vertebral column during drop vertical jump [Volume 39, Issue 1, 2023, Pages 89-98]
Axial compressorDesign and Replacement of a Three-Stage Axial Compressor with a Centrifugal Compressor in a Gas Turbine to Enhance Performance [Volume 41, Issue 1, 2025, Pages 29-42]
Axiomatic DesignApplication of Axiomatic Design approach to reduce coupling and repetition in the UCAV conceptual design process [37.3, Issue 2, 2021, Pages 69-79]
Biomechanical modelsEvaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]
Bladeless Wind TurbineOptimal Vibration Control of Bladeless Wind Power Generators [Volume 41, Issue 2, 2025, Pages 137-150]
Boundary feedback controlBoundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 57-63]
Boundary feedback controlBoundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 83-91]
BreakageInvestigating the Effectiveness of the Population Balance Model for Predicting Thermal Transfer Characteristics of Ice Slurry Flow within a Pipe [Volume 41, Issue 2, 2025, Pages 93-105]
Bubble dynamicsNumerical Evaluation of Cavitation Erosion Intensity around NACA0015 Hydrofoil Based on Eulerian-Lagrangian Approach [38.3, Issue 2, 2022, Pages 21-28]
Cavitation flowNumerical Evaluation of Cavitation Erosion Intensity around NACA0015 Hydrofoil Based on Eulerian-Lagrangian Approach [38.3, Issue 2, 2022, Pages 21-28]
CFDNumerical Investigating the Effect of the Nozzle on the Uniformity of the Refrigerant Distribution of the Evaporator Distributor [Volume 41, Issue 1, 2025, Pages 43-53]
Chemico-osmosisA review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
Clean hydrogenThermodynamic Modeling and Performance Assessment of a Clean Hydrogen Production Energy System Using a Palladium Separation Membrane Based on Gibbs Free Energy Minimization and Lagrange Undetermined Multipliers Method [(Articles in Press)]
Co-Flow Jet (CFJ)Numerical Study of the Effect of the Co-Flow Jet on the Aerodynamic Coefficients of a Kilowatt Horizontal Axis Wind Turbine Blade [Volume 41, Issue 1, 2025, Pages 125-135]
Cold Mass FractionNumerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
Colebrook equationOptimization of the Colebrook-White Equation based on experimental data [38.3, Issue 2, 2022, Pages 47-54]
CombustionExperimental investigation and analysis of combustion properties and chemical-physical properties of nano-fuel using hybrid nanostructure additives [Volume 39, Issue 1, 2023, Pages 55-67]
Combustion modelsNumerical investigation of the premixed V-flame stabilization and blowout [37.3, Issue 2, 2021, Pages 57-67]
CompositeInvestigation Of The Effect Of Shape Memory Alloy On Buckling And Post-Buckling Of Composite Panels In Supersonic Flow With Thermal Heating [Volume 39, Issue 2, 2023, Pages 3-11]
Computational Fluid dynamicsNumerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
Computational Fluid dynamicsThe Smart Design Of Heat Exchangers With Expanded Surfaces By Genetic Algorithm And Image Processing [Volume 39, Issue 2, 2023, Pages 25-35]
Computational Fluid dynamicsExperimental acoustic study of small horizontal axis wind turbines based on computational fluid dynamics and artificial intelligence approaches [Volume 40, Issue 2, 2024, Pages 52-63]
Condition MonitoringIntelligent Fault Detection of Rolling Element Bearing under Variable Operating Conditions by Convolutional Neural Network using Time and Frequency Domain Signals [Volume 40, Issue 2, 2024, Pages 38-51]
Contaminants transportA review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
Convective heat transferExperimental study of the effect of oil-based nanofluid on heat transfer characteristics in different arrangements of wavy microchannels [Volume 40, Issue 1, 2024, Pages 85-96]
Converging-Diverging NozzleSensitivity Analysis of the Dominant Design Parameters of Supersonic Separators
for Gas Compositions [37.3, Issue 1, 2021, Pages 111-123]
Convolutional Neural NetworkIntelligent Fault Detection of Rolling Element Bearing under Variable Operating Conditions by Convolutional Neural Network using Time and Frequency Domain Signals [Volume 40, Issue 2, 2024, Pages 38-51]
CoolingNUMERICAL SOLUTION OF CONJUGATE MIXED CONVECTION AND RADIATION IN A HORIZONTAL ELECTRONIC BOARD
WITH RECTANGULAR HEAT SOURCES [Volume 25, 51.2, 2010, Pages 25-32]
CoolingSimulation And Theoretical Analysis Of The Nanofluid-Based Oil Transformers For Improving The Cooling Performance Of The Transformer [Volume 39, Issue 2, 2023, Pages 93-106]
Coupled flowA review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
Coupled Rigid–Flexible StructuresFractional Order Sliding Mode Controller (FOSMC) Design for Attitude Control of a Satellite with Coupled Rigid–Flexible Structures Using Fractional Order Transfer Function [Volume 40, Issue 2, 2024, Pages 3-14]
CouplingApplication of Axiomatic Design approach to reduce coupling and repetition in the UCAV conceptual design process [37.3, Issue 2, 2021, Pages 69-79]
CPMDesign of controller and intelligent adaptive neural identifier for innovative knee rehabilitation devices [38.3, Issue 2, 2022, Pages 3-8]
CycloneNumerical study of the effect of combining passive flow control methods to improve cyclone performance [(Articles in Press)]
Cyclone SeparatorSensitivity Analysis of the Dominant Design Parameters of Supersonic Separators
for Gas Compositions [37.3, Issue 1, 2021, Pages 111-123]
DCBFINITE ELEMENT ANALYSIS OF DYNAMIC CRACK GROWTH USING REMESHING TECHNIQUE IN A DCB SPECIMEN UNDER LOADING CONDITIONS OF FIXED-DISPLACEMENT AND FIXED-LOAD [Volume 24, Issue 44, 2009, Pages 73-81]
Desiccation-cracked clayA Novel Analytical-Statistical-Numerical Framework for Investigating the Thermo-Hydro-Mechanical Behavior of Heterogeneous Subsidence Phenomena, Moisture and Temperature Variations in Cracked Soils Under Soil-Atmosphere Interaction [Volume 41, Issue 1, 2025, Pages 13-28]
Dragonfly-like insectModeling and Simulation of 18-Degree-of-Freedom Flight Dynamics of a Dragonfly-Inspired Micro Aerial Vehicle Considering Quasi-Steady Aerodynamics [Volume 41, Issue 2, 2025, Pages 107-125]
Drag reductionNumerical Study of Cylinder Drag Coefficient Reduction Using Passive Flow Control [38.3, Issue 2, 2022, Pages 77-86]
Droplet formationExperimental Investigation and Simulation of Controlled Size Droplet Formation in a Capillary Microdevice [Volume 40, Issue 2, 2024, Pages 76-84]
Drop vertical jumpComparison of experimental results between using auxetic shoe, conventional shoe and barefoot on the kinematics of vertebral column during drop vertical jump [Volume 39, Issue 1, 2023, Pages 89-98]
Ductile fractureExperimental and Numerical Analysis of Hydrostatic Pressure in Ductile Fracture of AL-6061T6 [Volume 41, Issue 2, 2025, Pages 77-92]
DybnzvtyvfnDeep desulfurization reaction kinetics for hydrogen-gasoline cutting oil [Volume 25, No . 50, 2010, Pages 47-53]
Dynamical SystemReduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]
Dynamic analysisDynamic Modeling of the Limb and the Passive Vibration Absorber System With the Aim of Suppressing the Rest Tremor of The Hand [Volume 41, Issue 1, 2025, Pages 83-98]
Dynamic ModelingModeling and Simulation of 18-Degree-of-Freedom Flight Dynamics of a Dragonfly-Inspired Micro Aerial Vehicle Considering Quasi-Steady Aerodynamics [Volume 41, Issue 2, 2025, Pages 107-125]
Dynamic Modes DecompositionReduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]
Dynamic stallNumerical Study of the Effect of the Co-Flow Jet on the Aerodynamic Coefficients of a Kilowatt Horizontal Axis Wind Turbine Blade [Volume 41, Issue 1, 2025, Pages 125-135]
Earth SensorAttitude Determination of Geosynchronous Satellites with Sun and Earth Sensors Using Artificial Intelligence Algorithms [(Articles in Press)]
Economic analysisEnergy, exergy, and exergoeconomic analysis of power generation cycle based on independent geothermal and solar energy [38.3, Issue 2, 2022, Pages 87-96]
Edge ComputingEdge-Computing-Based Anomaly Detection of Rotating Machines Using Artificial Neural Networks [Volume 41, Issue 2, 2025, Pages 33-47]
EfficiencyDesign And Comparison Of Combined, Parabolic, And Flat Plate Reflectors On The Performance Of A Solar Module [Volume 39, Issue 2, 2023, Pages 13-24]
Electronic BoardEnhanced Interfacial Fracture Prediction in Electronic Solder Joints Considering T-Stress under Mixed-Mode I/II Loading [(Articles in Press)]
EMGComparison of experimental results between using auxetic shoe, conventional shoe and barefoot on the kinematics of vertebral column during drop vertical jump [Volume 39, Issue 1, 2023, Pages 89-98]
EmissionNUMERICAL INVESTIGATION ON THE EFFECT OF INCREASING TURBULENCE INTENSITY AND CHANGING THE INJECTION
ANGLE ON THE PERFORMANCE AND EMISSION OF CATERPILLAR MARINE DIESEL ENGINE [38.3, Issue 1, 2022, Pages 99-112]
Energy analysisEnergy, exergy, and exergoeconomic analysis of power generation cycle based on independent geothermal and solar energy [38.3, Issue 2, 2022, Pages 87-96]
Energy HarvestersInvestigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
Erosion IntensityNumerical Evaluation of Cavitation Erosion Intensity around NACA0015 Hydrofoil Based on Eulerian-Lagrangian Approach [38.3, Issue 2, 2022, Pages 21-28]
Eulerian-Lagrangian methodNumerical Evaluation of Cavitation Erosion Intensity around NACA0015 Hydrofoil Based on Eulerian-Lagrangian Approach [38.3, Issue 2, 2022, Pages 21-28]
Eulerian-Lagrangian methodNanoparticles in the turbulent flow behind the backward step by Eulerian-Lagrangian method [Volume 40, Issue 1, 2024, Pages 47-60]
Exergy AnalysisEnergy, exergy, and exergoeconomic analysis of power generation cycle based on independent geothermal and solar energy [38.3, Issue 2, 2022, Pages 87-96]
Experimental methodsComprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
ExperimentationInvestigating the stability of the yield strength of the friction stir welding joint of similar amorphous thermoplastic based on the Ordered Weighted Averaging operators [Volume 40, Issue 2, 2024, Pages 64-75]
F
FabricationExperimental Investigation and Simulation of Controlled Size Droplet Formation in a Capillary Microdevice [Volume 40, Issue 2, 2024, Pages 76-84]
Finite ElementFlexibility and Geometric Optimization of a New Structure for a Polymer Stent with the Finite Element Method [Volume 40, Issue 1, 2024, Pages 15-23]
Finite Element MethodINVESTIGATING THE EFFECTS OF USING PIEZOELECTRIC LAYERS ON THE FREE AND FORCED VIBRATIONS OF FGM PLATES [Volume 25, 51.2, 2010, Pages 33-41]
Finite Element MethodUNSTEADY SOLUTION OF THE LINEAR AND NONLINEAR PRESSURE EQUATION IN SINGLE-PHASE OIL RESERVOIRS,
USING THE GREEN ELEMENT METHOD [Volume 25, No . 50, 2010, Pages 41-45]
Finite Element MethodNumerical evaluation of the mechanical performance of intelligent alloy stents under axial loading for application in peripheral artery [38.3, Issue 1, 2022, Pages 13-21]
Finite Element MethodApplication of Modal Analysis for Health Monitoring of Wind Turbine Blade [(Articles in Press)]
Fluid-Structure InteractionInvestigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
Forced vibrationDynamic Modeling of the Limb and the Passive Vibration Absorber System With the Aim of Suppressing the Rest Tremor of The Hand [Volume 41, Issue 1, 2025, Pages 83-98]
Force MethodMinimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]
Forming Limit DiagramInvestigating the effect of Texture Intensity on the Forming Limit Diagram of Magnesium Microtubes used in Stents using Crystal Plasticity Finite Element Modeling [Volume 40, Issue 2, 2024, Pages 15-24]
Fractional order sliding mode controlFractional Order Sliding Mode Controller (FOSMC) Design for Attitude Control of a Satellite with Coupled Rigid–Flexible Structures Using Fractional Order Transfer Function [Volume 40, Issue 2, 2024, Pages 3-14]
Fractional-order transfer functionFractional Order Sliding Mode Controller (FOSMC) Design for Attitude Control of a Satellite with Coupled Rigid–Flexible Structures Using Fractional Order Transfer Function [Volume 40, Issue 2, 2024, Pages 3-14]
Fracture energyExperimental determination of correction factors from Charpy impact testing of API X65 steel with varying specimen thickness [Volume 40, Issue 1, 2024, Pages 119-127]
Fracture strainNumerically and Experimentally Investigation of the Effect of Anisotropy and Stress Triaxiality on the Fracture Strain [Volume 39, Issue 1, 2023, Pages 27-34]
Fracture strainExperimental and Numerical Analysis of Hydrostatic Pressure in Ductile Fracture of AL-6061T6 [Volume 41, Issue 2, 2025, Pages 77-92]
Friction factorOptimization of the Colebrook-White Equation based on experimental data [38.3, Issue 2, 2022, Pages 47-54]
Friction Stir Welding (FSW)Investigating the stability of the yield strength of the friction stir welding joint of similar amorphous thermoplastic based on the Ordered Weighted Averaging operators [Volume 40, Issue 2, 2024, Pages 64-75]
Fuel control unit (FCU)Hardware-in-the-loop simulation of a gas turbine engine fuel control unit using model-based predictor [38.3, Issue 1, 2022, Pages 3-12]
Fuel Injection AngleNUMERICAL INVESTIGATION ON THE EFFECT OF INCREASING TURBULENCE INTENSITY AND CHANGING THE INJECTION
ANGLE ON THE PERFORMANCE AND EMISSION OF CATERPILLAR MARINE DIESEL ENGINE [38.3, Issue 1, 2022, Pages 99-112]
Gas TurbineDesign and Replacement of a Three-Stage Axial Compressor with a Centrifugal Compressor in a Gas Turbine to Enhance Performance [Volume 41, Issue 1, 2025, Pages 29-42]
Gas turbine engineHardware-in-the-loop simulation of a gas turbine engine fuel control unit using model-based predictor [38.3, Issue 1, 2022, Pages 3-12]
Genetic AlgorithmOPTIMIZATION OF OXIDATIVE COUPLING OF METHANE OVER PEROVSKITE CATALYST AND OCM KINETICS MODELING BY GENETIC ALGORITH [Volume 25, No . 50, 2010, Pages 15-24]
Genetic AlgorithmThe Smart Design Of Heat Exchangers With Expanded Surfaces By Genetic Algorithm And Image Processing [Volume 39, Issue 2, 2023, Pages 25-35]
Genetic AlgorithmIntegrated robust guidance and control of VTVL reusable launch vehicle at pre-landing phase using sliding mode control [Volume 39, Issue 1, 2023, Pages 3-13]
Genetic AlgorithmProposing an empirical motion-time pattern for human gaze behavior in different social situations [Volume 40, Issue 1, 2024, Pages 3-13]
Geometry deviationExperimental Study Of Multi-Point Incremental Forming For Conical Parts [Volume 39, Issue 2, 2023, Pages 37-44]
Geothermal EnergyEnergy, exergy, and exergoeconomic analysis of power generation cycle based on independent geothermal and solar energy [38.3, Issue 2, 2022, Pages 87-96]
Gibbs free energy minimizationThermodynamic Modeling and Performance Assessment of a Clean Hydrogen Production Energy System Using a Palladium Separation Membrane Based on Gibbs Free Energy Minimization and Lagrange Undetermined Multipliers Method [(Articles in Press)]
GPOPS SoftwareIntegrated robust guidance and control of VTVL reusable launch vehicle at pre-landing phase using sliding mode control [Volume 39, Issue 1, 2023, Pages 3-13]
Gradient Boosting MethodPrediction of the Hit Probability Under Various Noise Factors to Improve the Guidance Law of an Autonomous Underwater Vehicle [Volume 39, Issue 1, 2023, Pages 15-25]
Guidance LawPrediction of the Hit Probability Under Various Noise Factors to Improve the Guidance Law of an Autonomous Underwater Vehicle [Volume 39, Issue 1, 2023, Pages 15-25]
GyroscopeDesign, Manufacturing and Testing of a Cylindrical Vibrating Gyroscope [Volume 41, Issue 1, 2025, Pages 1-11]
H
H1DESIGNING PIECEWISE H1 CONTROLLERS FOR PIECEWISE AFFINE SYSTEMS [Volume 25, Issue 52, 2010, Pages 11-19]
Hand TremorDynamic Modeling of the Limb and the Passive Vibration Absorber System With the Aim of Suppressing the Rest Tremor of The Hand [Volume 41, Issue 1, 2025, Pages 83-98]
Hardware-in-the-loop (HIL)Hardware-in-the-loop simulation of a gas turbine engine fuel control unit using model-based predictor [38.3, Issue 1, 2022, Pages 3-12]
Heat TransferNumerical investigation of affecting parameters on the thermal and dynamic performance of a hot isostatic pressing furnace [38.3, Issue 1, 2022, Pages 85-97]
Heat TransferInvestigation of the local heating effect on the aerodynamic forces over a cylinder at Reynolds [Volume 39, Issue 1, 2023, Pages 69-77]
Heat TransferSimulation And Theoretical Analysis Of The Nanofluid-Based Oil Transformers For Improving The Cooling Performance Of The Transformer [Volume 39, Issue 2, 2023, Pages 93-106]
Heat transfer coefficientNumerical simulation of film pool boiling of ethanol-based nanofluids [Volume 40, Issue 2, 2024, Pages 25-37]
Heterogeneous land subsidenceA Novel Analytical-Statistical-Numerical Framework for Investigating the Thermo-Hydro-Mechanical Behavior of Heterogeneous Subsidence Phenomena, Moisture and Temperature Variations in Cracked Soils Under Soil-Atmosphere Interaction [Volume 41, Issue 1, 2025, Pages 13-28]
High-altitude Test FacilityExperimental Investigation of the Effect of Pre-evacuation on the Starting Performance of a Vacuum Simulator Diffuser with Conical Nozzles of Different Expansion Ratios [Volume 41, Issue 2, 2025, Pages 3-16]
High heat fluxA design algorithm and numerical investigation of a water-jacket cooling system for a high-altitude simulator diffuser [Volume 40, Issue 1, 2024, Pages 25-37]
Hit ProbabilityPrediction of the Hit Probability Under Various Noise Factors to Improve the Guidance Law of an Autonomous Underwater Vehicle [Volume 39, Issue 1, 2023, Pages 15-25]
Honeycomb StructureAn Analytical Model for Determining the Effective Thermal Conductivity Coefficient in a Honeycomb Network with Heat Dissipation from the Central Cylindrical Axis [Volume 41, Issue 1, 2025, Pages 111-123]
Hot isostatic pressing furnaceNumerical investigation of affecting parameters on the thermal and dynamic performance of a hot isostatic pressing furnace [38.3, Issue 1, 2022, Pages 85-97]
HVACInvestigation and simulation of a cooling cycle based on Misotsenko concept [Volume 39, Issue 1, 2023, Pages 79-88]
Hybrid nanoparticlesSimulation And Theoretical Analysis Of The Nanofluid-Based Oil Transformers For Improving The Cooling Performance Of The Transformer [Volume 39, Issue 2, 2023, Pages 93-106]
Hybrid nanostructureExperimental investigation and analysis of combustion properties and chemical-physical properties of nano-fuel using hybrid nanostructure additives [Volume 39, Issue 1, 2023, Pages 55-67]
Ice slurryInvestigating the Effectiveness of the Population Balance Model for Predicting Thermal Transfer Characteristics of Ice Slurry Flow within a Pipe [Volume 41, Issue 2, 2025, Pages 93-105]
IdentifierDesign of controller and intelligent adaptive neural identifier for innovative knee rehabilitation devices [38.3, Issue 2, 2022, Pages 3-8]
Image processingThe Smart Design Of Heat Exchangers With Expanded Surfaces By Genetic Algorithm And Image Processing [Volume 39, Issue 2, 2023, Pages 25-35]
Inconel 792Investigation of the Microstructure and Microhardness of Inconel 792 Superalloy After Laser Shock Peening [Volume 41, Issue 1, 2025, Pages 99-110]
Incremental formingExperimental Study Of Multi-Point Incremental Forming For Conical Parts [Volume 39, Issue 2, 2023, Pages 37-44]
InhibitionMODELING THE GROWTH KINETIC OF YEAST BBRC-9026 ON PHENOL [Volume 25, No . 50, 2010, Pages 3-8]
Injection PressureExperimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
InstabilityInvestigating of size-dependent buckling and instability caused by support forces and electrostatic field in porous annular microplates [Volume 40, Issue 1, 2024, Pages 75-84]
Instrumented Charpy impact machineExperimental determination of correction factors from Charpy impact testing of API X65 steel with varying specimen thickness [Volume 40, Issue 1, 2024, Pages 119-127]
Integrated Guidance and ControlIntegrated robust guidance and control of VTVL reusable launch vehicle at pre-landing phase using sliding mode control [Volume 39, Issue 1, 2023, Pages 3-13]
Intelligent alloysNumerical evaluation of the mechanical performance of intelligent alloy stents under axial loading for application in peripheral artery [38.3, Issue 1, 2022, Pages 13-21]
Intelligent Fault DiagnosisIntelligent Fault Detection of Rolling Element Bearing under Variable Operating Conditions by Convolutional Neural Network using Time and Frequency Domain Signals [Volume 40, Issue 2, 2024, Pages 38-51]
Interface tracking algorithmDeveloping an Interface Tracking Coupled Solver for Solving two Phase Flow Fields at Low Reynolds Numbers in foam-extend Platform [Volume 40, Issue 1, 2024, Pages 97-110]
Interfacial fractureEnhanced Interfacial Fracture Prediction in Electronic Solder Joints Considering T-Stress under Mixed-Mode I/II Loading [(Articles in Press)]
Internal pressureStress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
INVELOX systemModeling of a wind energy harvesting INVELOX system by combination of numerical results and semi-analytical framework [38.3, Issue 2, 2022, Pages 37-46]
Iran-KhodroEvaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]
Iterative Learning ControlIterative Learning Control to Enhance Accuracy of Repetitive Maneuvers for Aerial Robots [38.3, Issue 2, 2022, Pages 9-19]
J
Jaya algorithmMinimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]
Jet flow coefficientNumerical Study of the Effect of the Co-Flow Jet on the Aerodynamic Coefficients of a Kilowatt Horizontal Axis Wind Turbine Blade [Volume 41, Issue 1, 2025, Pages 125-135]
JointDesign of controller and intelligent adaptive neural identifier for innovative knee rehabilitation devices [38.3, Issue 2, 2022, Pages 3-8]
K
Kalina cycleMODELING AND ADVANCED EXERGY, EXERGOECONOMIC AND EXERGOENVIRONMENT ANALYSES OF NEW CCHP KALINA CYCLE INTEGRATED WITH SOLAR PARABOLIC TROUGH COLLECTORS [34.3, Issue 2, 2018, Pages 81-93]
Kilowatt wind turbineNumerical Study of the Effect of the Co-Flow Jet on the Aerodynamic Coefficients of a Kilowatt Horizontal Axis Wind Turbine Blade [Volume 41, Issue 1, 2025, Pages 125-135]
KinematicsComparison of experimental results between using auxetic shoe, conventional shoe and barefoot on the kinematics of vertebral column during drop vertical jump [Volume 39, Issue 1, 2023, Pages 89-98]
KineticsDeep desulfurization reaction kinetics for hydrogen-gasoline cutting oil [Volume 25, No . 50, 2010, Pages 47-53]
KneeDesign of controller and intelligent adaptive neural identifier for innovative knee rehabilitation devices [38.3, Issue 2, 2022, Pages 3-8]
Lagrange undetermined multipliersThermodynamic Modeling and Performance Assessment of a Clean Hydrogen Production Energy System Using a Palladium Separation Membrane Based on Gibbs Free Energy Minimization and Lagrange Undetermined Multipliers Method [(Articles in Press)]
Lagrangian flight simulatorRotor Design And Performance Study Of An Airborne Wind Energy System With Flight Dynamics Simulator [Volume 39, Issue 2, 2023, Pages 45-56]
Laminar flowExperimental study of the effect of oil-based nanofluid on heat transfer characteristics in different arrangements of wavy microchannels [Volume 40, Issue 1, 2024, Pages 85-96]
Land-climate interactionA Novel Analytical-Statistical-Numerical Framework for Investigating the Thermo-Hydro-Mechanical Behavior of Heterogeneous Subsidence Phenomena, Moisture and Temperature Variations in Cracked Soils Under Soil-Atmosphere Interaction [Volume 41, Issue 1, 2025, Pages 13-28]
LandfillA review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
Laplace transform methodAnalytical solution of mass transport equation in river network [38.3, Issue 1, 2022, Pages 35-49]
Laser Shock PeeningInvestigation of the Microstructure and Microhardness of Inconel 792 Superalloy After Laser Shock Peening [Volume 41, Issue 1, 2025, Pages 99-110]
Launch vehicleIntegrated robust guidance and control of VTVL reusable launch vehicle at pre-landing phase using sliding mode control [Volume 39, Issue 1, 2023, Pages 3-13]
Linear viscoelastic behaviorCharacterization of the Linear Viscoelastic Properties of Materials by the Results of Nanoindentation Test [Volume 41, Issue 1, 2025, Pages 69-81]
Low back painEvaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]
Low carbon energyPerformance and Emission Analysis of an Energy System Based on a Thermochemical Process and a Proton-Conducting Electrolyte Fuel Cell [Volume 41, Issue 2, 2025, Pages 127-135]
Low Reynolds numberThree-sphere swimmer in two dimensions at low Reynolds number condition [38.3, Issue 2, 2022, Pages 55-61]
Low Reynolds numberNumerical and Experimental Study of a Wing Combined with Wing Grids in Low Reynolds Number Flows [38.3, Issue 2, 2022, Pages 63-75]
Machine learningPrediction of the Hit Probability Under Various Noise Factors to Improve the Guidance Law of an Autonomous Underwater Vehicle [Volume 39, Issue 1, 2023, Pages 15-25]
Machine learningA Ring Selection Platform for Treatment of Keratoconus [Volume 41, Issue 2, 2025, Pages 17-31]
MagnesiumProcessing Of Thin Magnesium Tubes By Tubular Channel Angular Pressing (TCAP) Process With Trapezoidal Geometry [Volume 39, Issue 2, 2023, Pages 75-82]
Magnesium MicrotubeInvestigating the effect of Texture Intensity on the Forming Limit Diagram of Magnesium Microtubes used in Stents using Crystal Plasticity Finite Element Modeling [Volume 40, Issue 2, 2024, Pages 15-24]
Maisotsenko cycleInvestigation and simulation of a cooling cycle based on Misotsenko concept [Volume 39, Issue 1, 2023, Pages 79-88]
Marine Diesel EnginesNUMERICAL INVESTIGATION ON THE EFFECT OF INCREASING TURBULENCE INTENSITY AND CHANGING THE INJECTION
ANGLE ON THE PERFORMANCE AND EMISSION OF CATERPILLAR MARINE DIESEL ENGINE [38.3, Issue 1, 2022, Pages 99-112]
Mechanical behaviorInvestigating the stability of the yield strength of the friction stir welding joint of similar amorphous thermoplastic based on the Ordered Weighted Averaging operators [Volume 40, Issue 2, 2024, Pages 64-75]
Membrane efficiencyA review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
MetaheuristicMinimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]
Metal diffuserA design algorithm and numerical investigation of a water-jacket cooling system for a high-altitude simulator diffuser [Volume 40, Issue 1, 2024, Pages 25-37]
MethaneSensitivity Analysis of the Dominant Design Parameters of Supersonic Separators
for Gas Compositions [37.3, Issue 1, 2021, Pages 111-123]
Method of multiple scalesA nonlinear model for vibro-acoustic analysis of a submerged axially moving cylindrical shell [Volume 40, Issue 2, 2024, Pages 85-96]
Micro electro mechanical systemMechanical and electrical sensitivity of a capacitive micro ultrasonic transducer considering scale effects [38.3, Issue 2, 2022, Pages 29-36]
MicrohardnessInvestigation of the Microstructure and Microhardness of Inconel 792 Superalloy After Laser Shock Peening [Volume 41, Issue 1, 2025, Pages 99-110]
MMP DisplacementMMP DETERMINATION BY PARACHOR METHOD AND COMPARISON WITH ANALYTICAL METHOD [Volume 25, No . 50, 2010, Pages 25-33]
Mobile \ learningINVESTIGATION OF THE PROPER WAY TO FACILITATE LONG-TERM RETENTION OF VOCABULARY: COMPUTER-ASSISTED,
MOBILE-BASED, OR DICTIONARY INVOLVEMENT LEARNING [33.3, Issue 1, 2017, Pages 55-61]
Model-based predictorHardware-in-the-loop simulation of a gas turbine engine fuel control unit using model-based predictor [38.3, Issue 1, 2022, Pages 3-12]
Module temperatureDesign And Comparison Of Combined, Parabolic, And Flat Plate Reflectors On The Performance Of A Solar Module [Volume 39, Issue 2, 2023, Pages 13-24]
Molecular dynamics simulationsNanocars assembly on a surface: coarse-grained molecular dynamics study [Volume 40, Issue 1, 2024, Pages 39-46]
Monte Carlo methodPrediction of the Hit Probability Under Various Noise Factors to Improve the Guidance Law of an Autonomous Underwater Vehicle [Volume 39, Issue 1, 2023, Pages 15-25]
Moody ChartOptimization of the Colebrook-White Equation based on experimental data [38.3, Issue 2, 2022, Pages 47-54]
Multi-channel coolingA design algorithm and numerical investigation of a water-jacket cooling system for a high-altitude simulator diffuser [Volume 40, Issue 1, 2024, Pages 25-37]
Multidisciplinary Design OptimizationReliability-Based Multidisciplinary Design Optimization Under Uncertainty for Reusable Flexible Space Launcher utilizing NSGA-II [Volume 40, Issue 1, 2024, Pages 61-74]
Multi-InjectionExperimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
NanodiselExperimental investigation and analysis of combustion properties and chemical-physical properties of nano-fuel using hybrid nanostructure additives [Volume 39, Issue 1, 2023, Pages 55-67]
NanofluidNanoparticles in the turbulent flow behind the backward step by Eulerian-Lagrangian method [Volume 40, Issue 1, 2024, Pages 47-60]
NanofluidNumerical simulation of film pool boiling of ethanol-based nanofluids [Volume 40, Issue 2, 2024, Pages 25-37]
Nanofluid based on oilSimulation And Theoretical Analysis Of The Nanofluid-Based Oil Transformers For Improving The Cooling Performance Of The Transformer [Volume 39, Issue 2, 2023, Pages 93-106]
Nanofluid heat exchanger designThe Smart Design Of Heat Exchangers With Expanded Surfaces By Genetic Algorithm And Image Processing [Volume 39, Issue 2, 2023, Pages 25-35]
NanofuelExperimental investigation and analysis of combustion properties and chemical-physical properties of nano-fuel using hybrid nanostructure additives [Volume 39, Issue 1, 2023, Pages 55-67]
NanoindentationCharacterization of the Linear Viscoelastic Properties of Materials by the Results of Nanoindentation Test [Volume 41, Issue 1, 2025, Pages 69-81]
NanomazutExperimental investigation and analysis of combustion properties and chemical-physical properties of nano-fuel using hybrid nanostructure additives [Volume 39, Issue 1, 2023, Pages 55-67]
Non-Convex optimizationCharacterization of the Linear Viscoelastic Properties of Materials by the Results of Nanoindentation Test [Volume 41, Issue 1, 2025, Pages 69-81]
Nonlocal elasticity theoryStatic bending analysis of single walled carbon nanotubes using shell theory and nonlocal elasticity [(Articles in Press)]
Normalized Lode angleExperimental and Numerical Analysis of Hydrostatic Pressure in Ductile Fracture of AL-6061T6 [Volume 41, Issue 2, 2025, Pages 77-92]
Numerical analysisNUMERICAL SOLUTION OF CONJUGATE MIXED CONVECTION AND RADIATION IN A HORIZONTAL ELECTRONIC BOARD
WITH RECTANGULAR HEAT SOURCES [Volume 25, 51.2, 2010, Pages 25-32]
Numerical analysisNumerical and experimental analysis of anisotropic damage growth and martensitic phase change due to plastic strain at ambient temperature [Volume 40, Issue 2, 2024, Pages 97-106]
Numerical methodInvestigating of size-dependent buckling and instability caused by support forces and electrostatic field in porous annular microplates [Volume 40, Issue 1, 2024, Pages 75-84]
Numerical predictionNumerical Evaluation of Cavitation Erosion Intensity around NACA0015 Hydrofoil Based on Eulerian-Lagrangian Approach [38.3, Issue 2, 2022, Pages 21-28]
Numerical simulationsComprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
Nusselt numberExperimental study of the effect of oil-based nanofluid on heat transfer characteristics in different arrangements of wavy microchannels [Volume 40, Issue 1, 2024, Pages 85-96]
OCM kineticOPTIMIZATION OF OXIDATIVE COUPLING OF METHANE OVER PEROVSKITE CATALYST AND OCM KINETICS MODELING BY GENETIC ALGORITH [Volume 25, No . 50, 2010, Pages 15-24]
One-dimensional modelingDesign and Replacement of a Three-Stage Axial Compressor with a Centrifugal Compressor in a Gas Turbine to Enhance Performance [Volume 41, Issue 1, 2025, Pages 29-42]
Online LearningEdge-Computing-Based Anomaly Detection of Rotating Machines Using Artificial Neural Networks [Volume 41, Issue 2, 2025, Pages 33-47]
Ordered Weighted Averaging (OWA)Investigating the stability of the yield strength of the friction stir welding joint of similar amorphous thermoplastic based on the Ordered Weighted Averaging operators [Volume 40, Issue 2, 2024, Pages 64-75]
Owl FlightOwl Aeroacoustics: Analysis of a Silent Flight [Volume 39, Issue 1, 2023, Pages 99-118]
P
Palladium separation membraneThermodynamic Modeling and Performance Assessment of a Clean Hydrogen Production Energy System Using a Palladium Separation Membrane Based on Gibbs Free Energy Minimization and Lagrange Undetermined Multipliers Method [(Articles in Press)]
Particle Image VelocimetryExploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
Particle separationComprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
Particle size distributionInvestigating the Effectiveness of the Population Balance Model for Predicting Thermal Transfer Characteristics of Ice Slurry Flow within a Pipe [Volume 41, Issue 2, 2025, Pages 93-105]
Passive AbsorberDynamic Modeling of the Limb and the Passive Vibration Absorber System With the Aim of Suppressing the Rest Tremor of The Hand [Volume 41, Issue 1, 2025, Pages 83-98]
Passive methodsComprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
PDE observerSIMULTANEOUS ATTITUDE AND BENDING-TORSIONAL-VIBRATION CONTROL OF A SATELLITE WITH MULTI-SECTION FLEXIBLE PANELS USING PDE BASED BOUNDARY CONTROL-OBSERVER [38.3, Issue 1, 2022, Pages 51-62]
Performance ImprovementDesign and Replacement of a Three-Stage Axial Compressor with a Centrifugal Compressor in a Gas Turbine to Enhance Performance [Volume 41, Issue 1, 2025, Pages 29-42]
Peripheral arteryNumerical evaluation of the mechanical performance of intelligent alloy stents under axial loading for application in peripheral artery [38.3, Issue 1, 2022, Pages 13-21]
PiezoelectricINVESTIGATING THE EFFECTS OF USING PIEZOELECTRIC LAYERS ON THE FREE AND FORCED VIBRATIONS OF FGM PLATES [Volume 25, 51.2, 2010, Pages 33-41]
PiezoelectricNumerical Simulation Of Energy Harvesting From A Flexible Plate Behind A Cylinder Using Flow-Induced Vibrations [Volume 39, Issue 2, 2023, Pages 65-74]
Piezoelectric MaterialsInvestigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
Plasma ActuatorNumerical Study of the Effect of Flow Control Using Plasma Actuator on the Aerodynamic Performance of a VAWT [Volume 41, Issue 2, 2025, Pages 63-75]
PollutionExperimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
Pool boilingEXPERIMENTAL STUDY OF THE EFFECT OF SURFACE TYPE ON THE POOL BOILING HEAT TRANSFER CHARACTERISTICS IN THE PRESENCE OF NANOFLUIDS WITH HYBRID BASE FLUID [36.3, Issue 2, 2020, Pages 83-95]
Population balance modelInvestigating the Effectiveness of the Population Balance Model for Predicting Thermal Transfer Characteristics of Ice Slurry Flow within a Pipe [Volume 41, Issue 2, 2025, Pages 93-105]
PorousInvestigating of size-dependent buckling and instability caused by support forces and electrostatic field in porous annular microplates [Volume 40, Issue 1, 2024, Pages 75-84]
Power CoefficientStudy the effect of suction flow control on the aerodynamic performance of a wind turbine using 2D section numerical Results [37.3, Issue 1, 2021, Pages 79-89]
Prandtl correctionModeling of a wind energy harvesting INVELOX system by combination of numerical results and semi-analytical framework [38.3, Issue 2, 2022, Pages 37-46]
Pre-evacuationExperimental Investigation of the Effect of Pre-evacuation on the Starting Performance of a Vacuum Simulator Diffuser with Conical Nozzles of Different Expansion Ratios [Volume 41, Issue 2, 2025, Pages 3-16]
Premixed combustionNumerical investigation of the premixed V-flame stabilization and blowout [37.3, Issue 2, 2021, Pages 57-67]
Pressure distributionSTATIC SURFACE PRESSURE MEASUREMENT ON A SECTION OF A WIND TURBINE BLADE [Volume 24, Issue 42, 2009, Pages 59-65]
Pressure dropExperimental study of the effect of oil-based nanofluid on heat transfer characteristics in different arrangements of wavy microchannels [Volume 40, Issue 1, 2024, Pages 85-96]
Pressure dropNumerical study of the effect of combining passive flow control methods to improve cyclone performance [(Articles in Press)]
Pressure OscillationExperimental Investigation of the Effect of Pre-evacuation on the Starting Performance of a Vacuum Simulator Diffuser with Conical Nozzles of Different Expansion Ratios [Volume 41, Issue 2, 2025, Pages 3-16]
Proton-conducting electrolytePerformance and Emission Analysis of an Energy System Based on a Thermochemical Process and a Proton-Conducting Electrolyte Fuel Cell [Volume 41, Issue 2, 2025, Pages 127-135]
Reactivity Control Compression IgnitionExperimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
Reduced Order ModelReduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]
Re-entry TrajectoryReliability-Based Multidisciplinary Design Optimization Under Uncertainty for Reusable Flexible Space Launcher utilizing NSGA-II [Volume 40, Issue 1, 2024, Pages 61-74]
ReflectorDesign And Comparison Of Combined, Parabolic, And Flat Plate Reflectors On The Performance Of A Solar Module [Volume 39, Issue 2, 2023, Pages 13-24]
Regression ModelPerformance and Emission Analysis of an Energy System Based on a Thermochemical Process and a Proton-Conducting Electrolyte Fuel Cell [Volume 41, Issue 2, 2025, Pages 127-135]
ReliabilityRelationship between standard penetration number and chance reliability using liquefaction in soils Mas·hyy [Volume 24, Issue 42, 2009, Pages 13-20]
Reliability analysisRelationship between standard penetration number and chance reliability using liquefaction in soils Mas·hyy [Volume 24, Issue 42, 2009, Pages 13-20]
Reliability analysisReliability-Based Multidisciplinary Design Optimization Under Uncertainty for Reusable Flexible Space Launcher utilizing NSGA-II [Volume 40, Issue 1, 2024, Pages 61-74]
Representative Volume ElementInvestigating the effect of Texture Intensity on the Forming Limit Diagram of Magnesium Microtubes used in Stents using Crystal Plasticity Finite Element Modeling [Volume 40, Issue 2, 2024, Pages 15-24]
Residual stressInvestigation of the Microstructure and Microhardness of Inconel 792 Superalloy After Laser Shock Peening [Volume 41, Issue 1, 2025, Pages 99-110]
Residual stressesTHE EFFECT OF RESIDUAL STRESSES ON THE FATIGUE BEHAVIOR OF ROTARY COMPONENTS [Volume 25, 51.2, 2010, Pages 77-83]
Rolling element bearingIntelligent Fault Detection of Rolling Element Bearing under Variable Operating Conditions by Convolutional Neural Network using Time and Frequency Domain Signals [Volume 40, Issue 2, 2024, Pages 38-51]
Schmidt FactorInvestigation of Texture Intensity Effect on Deformation Behavior of Extruded Mg-0.8wt%Y Alloy under Tensile and Compressive Loading Using the Crystalline Plasticity Finite Element Method [37.3, Issue 1, 2021, Pages 59-69]
Second Throat Exhaust DiffuserExperimental Investigation of the Effect of Pre-evacuation on the Starting Performance of a Vacuum Simulator Diffuser with Conical Nozzles of Different Expansion Ratios [Volume 41, Issue 2, 2025, Pages 3-16]
Self-assemblyNanocars assembly on a surface: coarse-grained molecular dynamics study [Volume 40, Issue 1, 2024, Pages 39-46]
Separation efficiencyNumerical study of the effect of combining passive flow control methods to improve cyclone performance [(Articles in Press)]
Severe plastic deformationEXPERIMENTAL INVESTIGATION AND NUMERICAL ANALYSIS OF NOVEL PROCESS TO PRODUCE OF HIGH STRENGTH BIMETAL TUBES BY RUBBER PAD TUBE STRAINING (RPTS) METHOD [36.3, Issue 1, 2020, Pages 121-131]
Shallow-water SloshingBoundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 57-63]
Shallow-water SloshingBoundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 83-91]
Shape memory alloysInvestigation Of The Effect Of Shape Memory Alloy On Buckling And Post-Buckling Of Composite Panels In Supersonic Flow With Thermal Heating [Volume 39, Issue 2, 2023, Pages 3-11]
Size dependent theoryInvestigating of size-dependent buckling and instability caused by support forces and electrostatic field in porous annular microplates [Volume 40, Issue 1, 2024, Pages 75-84]
Sliding Mode ControllerIntegrated robust guidance and control of VTVL reusable launch vehicle at pre-landing phase using sliding mode control [Volume 39, Issue 1, 2023, Pages 3-13]
Slip systemsInvestigation of Texture Intensity Effect on Deformation Behavior of Extruded Mg-0.8wt%Y Alloy under Tensile and Compressive Loading Using the Crystalline Plasticity Finite Element Method [37.3, Issue 1, 2021, Pages 59-69]
Solar moduleDesign And Comparison Of Combined, Parabolic, And Flat Plate Reflectors On The Performance Of A Solar Module [Volume 39, Issue 2, 2023, Pages 13-24]
StentNumerical evaluation of the mechanical performance of intelligent alloy stents under axial loading for application in peripheral artery [38.3, Issue 1, 2022, Pages 13-21]
StentFlexibility and Geometric Optimization of a New Structure for a Polymer Stent with the Finite Element Method [Volume 40, Issue 1, 2024, Pages 15-23]
Stewart goughMANIPULATOR WITH PREDEFINED STIFFNESS [Volume 25, 51.2, 2010, Pages 85-92]
StiffnessMANIPULATOR WITH PREDEFINED STIFFNESS [Volume 25, 51.2, 2010, Pages 85-92]
Stress intensity factorStress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
Stress triaxialityNumerically and Experimentally Investigation of the Effect of Anisotropy and Stress Triaxiality on the Fracture Strain [Volume 39, Issue 1, 2023, Pages 27-34]
Stress triaxialityExperimental and Numerical Analysis of Hydrostatic Pressure in Ductile Fracture of AL-6061T6 [Volume 41, Issue 2, 2025, Pages 77-92]
Submerged moving cylindrical shellA nonlinear model for vibro-acoustic analysis of a submerged axially moving cylindrical shell [Volume 40, Issue 2, 2024, Pages 85-96]
Suction Actuator, Wind TurbineStudy the effect of suction flow control on the aerodynamic performance of a wind turbine using 2D section numerical Results [37.3, Issue 1, 2021, Pages 79-89]
Sun SensorAttitude Determination of Geosynchronous Satellites with Sun and Earth Sensors Using Artificial Intelligence Algorithms [(Articles in Press)]
Swirly FlowNUMERICAL INVESTIGATION ON THE EFFECT OF INCREASING TURBULENCE INTENSITY AND CHANGING THE INJECTION
ANGLE ON THE PERFORMANCE AND EMISSION OF CATERPILLAR MARINE DIESEL ENGINE [38.3, Issue 1, 2022, Pages 99-112]
Tethered flightRotor Design And Performance Study Of An Airborne Wind Energy System With Flight Dynamics Simulator [Volume 39, Issue 2, 2023, Pages 45-56]
Theoretical ModelAn Analytical Model for Determining the Effective Thermal Conductivity Coefficient in a Honeycomb Network with Heat Dissipation from the Central Cylindrical Axis [Volume 41, Issue 1, 2025, Pages 111-123]
Thermal bucklingInvestigation Of The Effect Of Shape Memory Alloy On Buckling And Post-Buckling Of Composite Panels In Supersonic Flow With Thermal Heating [Volume 39, Issue 2, 2023, Pages 3-11]
Thermal Conductivity CoefficientAn Analytical Model for Determining the Effective Thermal Conductivity Coefficient in a Honeycomb Network with Heat Dissipation from the Central Cylindrical Axis [Volume 41, Issue 1, 2025, Pages 111-123]
Thermal DiffusionReduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]
Thermal distributionStress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
Thermal efficiencyExperimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
Thermal resistanceAn Analytical Model for Determining the Effective Thermal Conductivity Coefficient in a Honeycomb Network with Heat Dissipation from the Central Cylindrical Axis [Volume 41, Issue 1, 2025, Pages 111-123]
Thermochemical approachPerformance and Emission Analysis of an Energy System Based on a Thermochemical Process and a Proton-Conducting Electrolyte Fuel Cell [Volume 41, Issue 2, 2025, Pages 127-135]
Thermo-electro-elastic analysisTHERMO-ELECTRO-MECHANICAL ANALYSIS OF CYLINDRICAL SHELL MADE OF FUNCTIONALLY GRADED PIEZOELECTRIC
MATERIALS USING ARBITRARY HIGHER-ORDER SHEAR DEFORMATION THEORY [34.3, Issue 1, 2018, Pages 125-135]
Thermo-hydro-mechanical modelingA Novel Analytical-Statistical-Numerical Framework for Investigating the Thermo-Hydro-Mechanical Behavior of Heterogeneous Subsidence Phenomena, Moisture and Temperature Variations in Cracked Soils Under Soil-Atmosphere Interaction [Volume 41, Issue 1, 2025, Pages 13-28]
Thickness distributionExperimental Study Of Multi-Point Incremental Forming For Conical Parts [Volume 39, Issue 2, 2023, Pages 37-44]
Transformation phaseNumerical and experimental analysis of anisotropic damage growth and martensitic phase change due to plastic strain at ambient temperature [Volume 40, Issue 2, 2024, Pages 97-106]
Transformer oilSimulation And Theoretical Analysis Of The Nanofluid-Based Oil Transformers For Improving The Cooling Performance Of The Transformer [Volume 39, Issue 2, 2023, Pages 93-106]
Transient SolutionNumerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
Transmission lossA nonlinear model for vibro-acoustic analysis of a submerged axially moving cylindrical shell [Volume 40, Issue 2, 2024, Pages 85-96]
Tremor SuppressionDynamic Modeling of the Limb and the Passive Vibration Absorber System With the Aim of Suppressing the Rest Tremor of The Hand [Volume 41, Issue 1, 2025, Pages 83-98]
T-stress term. Strain energy release rateEnhanced Interfacial Fracture Prediction in Electronic Solder Joints Considering T-Stress under Mixed-Mode I/II Loading [(Articles in Press)]
Tubular channel angular pressing (TCAP) processProcessing Of Thin Magnesium Tubes By Tubular Channel Angular Pressing (TCAP) Process With Trapezoidal Geometry [Volume 39, Issue 2, 2023, Pages 75-82]
Turbulence IntensityNUMERICAL INVESTIGATION ON THE EFFECT OF INCREASING TURBULENCE INTENSITY AND CHANGING THE INJECTION
ANGLE ON THE PERFORMANCE AND EMISSION OF CATERPILLAR MARINE DIESEL ENGINE [38.3, Issue 1, 2022, Pages 99-112]
Turbulence modelNanoparticles in the turbulent flow behind the backward step by Eulerian-Lagrangian method [Volume 40, Issue 1, 2024, Pages 47-60]
Turbulence modelsNumerical investigation of the premixed V-flame stabilization and blowout [37.3, Issue 2, 2021, Pages 57-67]
UltrasonicEffect of vibration amplitude and temperature on the shape and size of aluminum powder produced by ultrasonic atomizer process [Volume 39, Issue 1, 2023, Pages 25-45]
UncertaintiesIterative Learning Control to Enhance Accuracy of Repetitive Maneuvers for Aerial Robots [38.3, Issue 2, 2022, Pages 9-19]
Underwater Autonomous VehiclePrediction of the Hit Probability Under Various Noise Factors to Improve the Guidance Law of an Autonomous Underwater Vehicle [Volume 39, Issue 1, 2023, Pages 15-25]
Variable Operating ConditionsIntelligent Fault Detection of Rolling Element Bearing under Variable Operating Conditions by Convolutional Neural Network using Time and Frequency Domain Signals [Volume 40, Issue 2, 2024, Pages 38-51]
Velocity boundary layerInvestigation of the local heating effect on the aerodynamic forces over a cylinder at Reynolds [Volume 39, Issue 1, 2023, Pages 69-77]
Vertical Axis Wind TurbineA Comparative Study of the Aerodynamic Performance and Economic Viability of H-Shape and V-Shape Wind Turbines in the Climate of Zahedan City [Volume 40, Issue 1, 2024, Pages 111-118]
V-flameNumerical investigation of the premixed V-flame stabilization and blowout [37.3, Issue 2, 2021, Pages 57-67]
VibrationINVESTIGATING THE EFFECTS OF USING PIEZOELECTRIC LAYERS ON THE FREE AND FORCED VIBRATIONS OF FGM PLATES [Volume 25, 51.2, 2010, Pages 33-41]
Vibration amplitudeEffect of vibration amplitude and temperature on the shape and size of aluminum powder produced by ultrasonic atomizer process [Volume 39, Issue 1, 2023, Pages 25-45]
Vibration analysisIntelligent Fault Detection of Rolling Element Bearing under Variable Operating Conditions by Convolutional Neural Network using Time and Frequency Domain Signals [Volume 40, Issue 2, 2024, Pages 38-51]
VibrationsOptimal Vibration Control of Bladeless Wind Power Generators [Volume 41, Issue 2, 2025, Pages 137-150]
Vortex sheddingNumerical Study of Cylinder Drag Coefficient Reduction Using Passive Flow Control [38.3, Issue 2, 2022, Pages 77-86]
Vortex TubeNumerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
W
WakeSTATIC SURFACE PRESSURE MEASUREMENT ON A SECTION OF A WIND TURBINE BLADE [Volume 24, Issue 42, 2009, Pages 59-65]
WakeEXPERIMENTAL INVESTIGATION OF TURBULENT FLOW AROUND A 3D SQUARE CYLINDER WITH WALL EFFECT [30.3, Issue 1, 2014, Pages 65-77]
Water-gas shift reactorThermodynamic Modeling and Performance Assessment of a Clean Hydrogen Production Energy System Using a Palladium Separation Membrane Based on Gibbs Free Energy Minimization and Lagrange Undetermined Multipliers Method [(Articles in Press)]
Water-jacket methodA design algorithm and numerical investigation of a water-jacket cooling system for a high-altitude simulator diffuser [Volume 40, Issue 1, 2024, Pages 25-37]
Wind energyInvestigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
Wind energyModeling of a wind energy harvesting INVELOX system by combination of numerical results and semi-analytical framework [38.3, Issue 2, 2022, Pages 37-46]
Wind energyNumerical Study of the Effect of Flow Control Using Plasma Actuator on the Aerodynamic Performance of a VAWT [Volume 41, Issue 2, 2025, Pages 63-75]
Wind TurbineExperimental acoustic study of small horizontal axis wind turbines based on computational fluid dynamics and artificial intelligence approaches [Volume 40, Issue 2, 2024, Pages 52-63]
Wind TurbineNumerical Study of the Effect of Flow Control Using Plasma Actuator on the Aerodynamic Performance of a VAWT [Volume 41, Issue 2, 2025, Pages 63-75]
Wind Turbine BladeApplication of Modal Analysis for Health Monitoring of Wind Turbine Blade [(Articles in Press)]
Wind Turbine BladeNumerical study of the effects of different erosion types over blade surface, on the aerodynamic characteristics of a wind turbine via 3D simulations [(Articles in Press)]
X-ray diffraction testsNumerical and experimental analysis of anisotropic damage growth and martensitic phase change due to plastic strain at ambient temperature [Volume 40, Issue 2, 2024, Pages 97-106]
Zener modelStress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
