Abazari, A.M. Mechanical and electrical sensitivity of a capacitive micro ultrasonic transducer considering scale effects [38.3, Issue 2, 2022, Pages 29-36]
Abazari, A.M. Flexibility and Geometric Optimization of a New Structure for a Polymer Stent with the Finite Element Method [Volume 40, Issue 1, 2024, Pages 15-23]
Abbasi, M. EVALUATION AND COMPARISON OF STRAIN DISTRIBUTION IN THICK MICROALLOY AND PLAIN CARBON SHEET STEELS [Volume 23, No. 39, 2007, Pages 87-92]
Abbasi, S. NUMERICAL STUDY OF AERODYNAMIC NOISE REDUCTION ON A SQUARE CYLINDER USING SPLITTER [35.3, Issue 2, 2019, Pages 79-87]
Abbasi, Y. SISTEM IDENTIFICATION IN (H∞) [Volume 20, Issue 26, 2004, Pages 51-57]
Abbaspour, M. LONG TERM NATIONAL DEVELOPMENT PLAN IN INDUSTRY: UNIVERSITY - INDUSTRY RELATIONS [Volume 15, No. 17, 1999, Pages 14-27]
Abdi, J. COMBINING CONTEXT AND EMOTIONAL TEMPORAL DIFFERENCES LEARNING IN CONTROLS ENGINEERING [Volume 21, No.30, 2005, Pages 13-21]
Abdi, S. THE EFFECTS OF AUDITORY FEEDBACK ON FUNDAMENTAL FREQUENCY CONTOURS OF FARSI-SPEAKING HEARING-IMPAIRED ADULTS AFTER MULTICHANNEL COCHLEAR IMPLANTATION [Volume 19, No. 25, 2003, Pages 110-119]
Abdollahi, Taleb Attitude Determination of Geosynchronous Satellites with Sun and Earth Sensors Using Artificial Intelligence Algorithms [(Articles in Press)]
Abedi, Z. Classification and technological indicators; Iran [Volume 12, Issue 12, 1997, Pages 26-39]
Abedinimanesh, P. Numerically and Experimentally Investigation of the Effect of Anisotropy and Stress Triaxiality on the Fracture Strain [Volume 39, Issue 1, 2023, Pages 27-34]
Abolghasemi, H. VOLUME FLOW RATE AND BED DEPTH EFFECTS OF CARBON ACTIVE RESIN IN BENZOIC ACID ADSORPTION [Volume 25, No . 50, 2009, Pages 35-39]
Abolghasemi, M. In this structure, educational programs in higher education [Volume 15, No. 16, 1999, Pages 10-19]
Abolpour, B. The Smart Design Of Heat Exchangers With Expanded Surfaces By Genetic Algorithm And Image Processing [Volume 39, Issue 2, 2023, Pages 25-35]
Abtakar, T. Introduction of scientific training - practical (technology) in Iran [Volume 8, Issue 2, 1991, Pages 21-24]
Abu Ali, O. A 3-DIMENTIONAL EULER SOLUTION FOR SUPERSONIC FLOWS USING ROES METHOD WITH EXPLICIT AND IMPLICIT TECHNIQUES [Volume 20, Issue 26, 2004, Pages 73-81]
Adeli, F. STUDY OF SOLIDIFICATION OF WELDING OF NICKEL BASE SUPER ALLOY (UDIMET 520) IN GTAW METHOD [Volume 20, Issue 28, 2004, Pages 22-28]
Adeli, S.M..H. Qtbbndyhay strategies and new world [Volume 8, Issue 3, 1992, Pages 43-46]
Adelkhani, H. ELECTROPLATING OF Fe-Ni-Cr ALLOY WITH PULSE CURRENT [Volume 17, NO. 20, 2002, Pages 78-83]
Adib, M. DESIGN AND ANALYSIS OF NEW ALGORITHMS FOR SOLVING CERTAIN SYSTEMS AND LINEAR PROGRAMS OVER REAL AND INTEGER SPACES [Volume 19, No. 25, 2003, Pages 13-20]
Afzalzadeh, R. DETECTION OF COMBUSTIBLE GASES BY TIN OXIDE RESISTIVE GAS SENSOR FABRICATED BY ELECTRON BEAM EVAPORATION [Volume 23, No . 38, 2007, Pages 21-29]
Aghababaie, M. DESIGN OF A MULTI-FINGERED GRIPPER FOR CYLINDRICAL OBJECT MANIPULATION [Volume 25, 51.2, 2010, Pages 69-76]
A. Hemmatyar, A.M. ANALYSIS OF SENSITIVITY OF FEED - FORWARD LINE ARIZATION SYSTEM TO AMPLITUDE AND PHASE MISMATCH, APPLIED IN MICROWAVE POWER AMPLIFIERS [Volume 23, No . 38, 2007, Pages 103-108]
Ahmadi, Isa Static bending analysis of single walled carbon nanotubes using shell theory and nonlocal elasticity [(Articles in Press)]
Ahmadi, M. Rotor Design And Performance Study Of An Airborne Wind Energy System With Flight Dynamics Simulator [Volume 39, Issue 2, 2023, Pages 45-56]
Ahmadi, N. Oxygenated compounds and gaseous fuels used in vehicles to be used as energy sources in transportation sector [Volume 10, No . 7, 1994, Pages 28-32]
Ahmadian, M. SOURCE CODED MODULATION FOR DISCRETE SOURCES WITH MEMORY [Volume 25, Issue 52, 2010, Pages 31-36]
Ahmadian, M.T. VIBRATION ANALYSIS OF LAMINATED COMPOSITE PLATES USING SUPER ELEMENTS [Volume 18, Issue 21, 2002, Pages 42-47]
Ahmadi Boyaghchi, F . MODELING AND ADVANCED EXERGY, EXERGOECONOMIC AND EXERGOENVIRONMENT ANALYSES OF NEW CCHP KALINA CYCLE INTEGRATED WITH SOLAR PARABOLIC TROUGH COLLECTORS [34.3, Issue 2, 2018, Pages 81-93]
Ahmadi Brooghani, Seyed Yousef Investigation of the Microstructure and Microhardness of Inconel 792 Superalloy After Laser Shock Peening [Volume 41, Issue 1, 2025, Pages 99-110]
Akbari, M. Dynamic behavior analysis of piezoelectric flow micro sensors and corresponding linear working domain [Volume 39, Issue 1, 2023, Pages 47-53]
Akbarpour, M. R HIGH TEMPERATURE MECHANICAL PROPERTIES OF FERRITE-BAINITE DUAL PHASE STEELS [Volume 25, Issue 47, 2009, Pages 33-39]
Akbarzadeh, A. EFFECT OF THERMOMECHANICAL PARAMETERS ON TEXTURE AND ANISOTROPY OF 90-10 BRASS SHEETS [Volume 23, No. 39, 2007, Pages 19-24]
Alaqband, J. Comparative research and development (R & D) in several countries [Volume 15, No. 16, 1999, Pages 25-32]
Alaqbndrad, J. Position of Research in Medical Sciences [Volume 15, No. 16, 1999, Pages 53-60]
Alasti, F. THE IMPORTANCE OF TRANSGENIC LIVING ORGANISMS IN BIOTECHNOLOGY [Volume 16, No . 16, 2000, Pages 23-29]
Alasty, A. PASSING THROUGH NARROW GATES FOR A MULTI-AGENT SYSTEM [31.3, Issue 1, 2016, Pages 127-135]
Alavi Nobandegani, Mohammad Amin Investigating the Effectiveness of the Population Balance Model for Predicting Thermal Transfer Characteristics of Ice Slurry Flow within a Pipe [Volume 41, Issue 2, 2026, Pages 93-105]
Alemansour, H. MODELING AND MOVING OBJECT TRACKING CONTROL OF A THREE LINK ROBOTIC FISH [30.3, 2.1, 2014, Pages 77-89]
Alemi, M. INVESTIGATION OF THE PROPER WAY TO FACILITATE LONG-TERM RETENTION OF VOCABULARY: COMPUTER-ASSISTED,
MOBILE-BASED, OR DICTIONARY INVOLVEMENT LEARNING [33.3, Issue 1, 2017, Pages 55-61]
Alemi, M. Recognizing Acceptance Level in Facial Expressions by Neural Network [37.3, Issue 2, 2021, Pages 13-20]
Alemzadeh, I. SUGAR BEET PULP, DETERMINATION AND DRYING [Volume 24, No . 41, 2008, Pages 9-12]
Alemzadeh, I. CHARACTERISTICS AND APPLICATION OF BIOSURFACTANTS [Volume 17, NO. 20, 2002, Pages 50-53]
Alemzadeh, I. EFFECT OF LOADING RATE AND ENVIRONMENTAL CONDITIONS ON BIOLOGICAL REMOVAL OF TOLUENE IN AN ANAEROBIC SYSTEM [Volume 19, No. 24, 2003, Pages 58-61]
Ali Ahmadi, A.R. THE ROLE OF HIGHER EDUCATION IN DEVELOPMENT PROCESS EMPHASIZING THE RELATIONSHIP BETWEEN GOVERNMENT, UNIVERSITY AND INDUSTRY [Volume 15, No. 17, 1999, Pages 51-54]
Ali-Ahmadi, A.R. THE ROLE OF INFORMATION NETWORKS AND MULTIMEDIA TECHNOLOGY IN ADVANCEMENT OF SCIENTIFIC AND TECHNICAL LEVEL OF SEVERAL COUNTRIES [Volume 18, NO. Special ((IT)), 2002, Pages 25-30]
Alishahi, M. M. STUDY OF PROPELLER INSTALLMENT ANGLE AND ITS 3-D AERODYNAMIC INTERFERENCES WITH A FLYING-BOAT EMPUENNAGE IN GROUND EFFECTS [Volume 24, Issue 42, 2009, Pages 89-94]
Alishahi, M. M. NUMERICAL SIMULATION OF FLOW FIELD WITH SWIRLING COMBUSTION IN A COMBUSTION CHAMBER [Volume 21, Issue 31, 2005, Pages 13-19]
Alishahi, M.M. A 3-DIMENTIONAL EULER SOLUTION FOR SUPERSONIC FLOWS USING ROES METHOD WITH EXPLICIT AND IMPLICIT TECHNIQUES [Volume 20, Issue 26, 2004, Pages 73-81]
Aliyari, R. RECENT ACHIEVEMENTS IN PLANT BIOTECHNOLOGY [Volume 16, No . 16, 2000, Pages 30-36]
Aliyev Khzrayy, Mahmoud STUDY OF EFFECTIVE PARAMETERS ON CORROSION RESISTANCE OF PLASMA ELECTROLYTIC NITROCARBURISED 316L AUESTENITIC STAINLESS STEEL [Volume 23, No. 39, 2007, Pages 67-73]
Alizadeh, Aysan Edge-Computing-Based Anomaly Detection of Rotating Machines Using Artificial Neural Networks [Volume 41, Issue 2, 2026, Pages 33-47]
Amin, M. M. PERFORMANCE COMPARISON OF HORIZONTAL- FLOW ANAEROBIC IMMOBILIZED SLUDGE (HAIS) AND UASB REACTORS USING A SYNTHETIC SUBSTRATE [Volume 21, Issue 29, 2005, Pages 63-70]
Aminaee, I. INVESTIGATING THE EFFECTS OF USING PIEZOELECTRIC LAYERS ON THE FREE AND FORCED VIBRATIONS OF FGM PLATES [Volume 25, 51.2, 2010, Pages 33-41]
Amini Fasakhodi, M. R. FINITE ELEMENT ANALYSIS OF DYNAMIC CRACK GROWTH USING REMESHING TECHNIQUE IN A DCB SPECIMEN UNDER LOADING CONDITIONS OF FIXED-DISPLACEMENT AND FIXED-LOAD [Volume 24, Issue 44, 2008, Pages 73-81]
Amini Magham, M.R. Sensitivity Analysis of the Dominant Design Parameters of Supersonic Separators
for Gas Compositions [37.3, Issue 1, 2021, Pages 111-123]
Amir Fattahi, R. THE EFFECTS OF AUDITORY FEEDBACK ON FUNDAMENTAL FREQUENCY CONTOURS OF FARSI-SPEAKING HEARING-IMPAIRED ADULTS AFTER MULTICHANNEL COCHLEAR IMPLANTATION [Volume 19, No. 25, 2003, Pages 110-119]
Amiri, A. COMPARISON AND SUGGESTION OF BEST EOS'S TO PREDICT PHYSICAL PROPERTIES IN WAX/CATALYST SEPARATION BY
SUPERCTITICAL HEXANE [Volume 24, No . 41, 2008, Pages 21-28]
Anooshepor, F. EVALUATION AND COMPARISON OF STRAIN DISTRIBUTION IN THICK MICROALLOY AND PLAIN CARBON SHEET STEELS [Volume 23, No. 39, 2007, Pages 87-92]
Ansari, A.B. The Smart Design Of Heat Exchangers With Expanded Surfaces By Genetic Algorithm And Image Processing [Volume 39, Issue 2, 2023, Pages 25-35]
Aoon Manesh, A. SCIENCE AND TECHNOLOGY DEVELOPMEN IN IRAN, A CASE STUDY: AGRICULTURE [Volume 18, NO. Special ((IT)), 2002, Pages 54-66]
Arab Yaghoubi, M. Aeronautical engineering training programs in Iran and world major countries [Volume 9, Issue 5, 1993, Pages 42-49]
Arasti, M. R. FUEL CELL ATTRACTIVENESS FOR IRAN CAR INDUSTRY VERSUS ITS ALTERNATIVE TECHNOLOGIES [Volume 19, No. 24, 2003, Pages 49-57]
Arbabi Ghahroudi, M. DESIGN AND LARGE - SCALE PRODUCTION OF HUMAN AND NON- HUMAN RECOMBINANT ANTIBODIES USING PHAGE DISPLAY TECHNOLOGY [Volume 16, No . 16, 2000, Pages 45-49]
Ardakanian, R. RANKING THE INTER-BASIN WATER TRANSFERS USING INDUCED ORDERED WEIGHTED AVERAGING OPERATOR [Volume 23, No . 37, 2007, Pages 99-109]
Aref, M. R. SOURCE CODED MODULATION FOR DISCRETE SOURCES WITH MEMORY [Volume 25, Issue 52, 2010, Pages 31-36]
Aref, M.R. IMPROVING THE EFFICIENCY OF DATA TRANSMIT SYSTEM FOR LEO REMOTE SENSING SATELLITES BASED ON TRANSMISSION RATE AND POWER CONTROL [Volume 21, No.30, 2005, Pages 31-40]
Arezoo, B. STATIC MODELS FOROREDICTING THE EFFECTS OF SUPPORTS ON ASSISTANCE MACHINING FLATNESS [Volume 18, Issue 22, 2002, Pages 24-33]
Arjmand, N. Evaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]
Arjmand, N. Comparison of experimental results between using auxetic shoe, conventional shoe and barefoot on the kinematics of vertebral column during drop vertical jump [Volume 39, Issue 1, 2023, Pages 89-98]
Arshadi, M. R. ELECTROPLATING OF Fe-Ni-Cr ALLOY WITH PULSE CURRENT [Volume 17, NO. 20, 2002, Pages 78-83]
Arshdnejad, Sh. STABILITY ANALYSIS OF TUNNEL, PORTAL TRENCH AND UNSTABLE WEDGES OF THE TUNNEL IN THE SHENAGE 47+400 GHAZVIN -RASHT -ANZALI RAILROAD USING STEREONET AND COMPUTER SIMULATION [Volume 23, No. 39, 2007, Pages 31-39]
Arshi, A.A. Landscape oil market developments in the 90s (2) [Volume 10, No . 7, 1994, Pages 21-28]
Arshi, A.A. International oil market developments and prospects in the 90s (1) [Volume 9, No . 6, 1993, Pages 22-30]
Asadi, R. DESIGN AND FABRICATION OF A PNEUMATIC DISTANCE SENSOR FOR LASER AUTOFOCUS SYSTEMS [31.3, Issue 1, 2016, Pages 55-64]
Asadi Azghan, B. Integrated robust guidance and control of VTVL reusable launch vehicle at pre-landing phase using sliding mode control [Volume 39, Issue 1, 2023, Pages 3-13]
Asayesh, M. FAULT DIAGNOSIS IN ROTATING MACHINERY BY VIBRATION ANALYSIS [Volume 18, Issue 21, 2002, Pages 37-41]
Asempoor, A. PRESSURE ETIMATION IN HDROFORMING OF SHEET METALS USING THE UPPER BOUND TECHNIQUE [Volume 23, No . 37, 2007, Pages 71-79]
Asempour, A. USING A SLIP LINE FLELD IN THE MODELING OF GENERAL SHAPE DEEP DRAWN PARTS [Volume 18, Issue 22, 2002, Pages 34-40]
Asempour, A. Investigation of Texture Intensity Effect on Deformation Behavior of Extruded Mg-0.8wt%Y Alloy under Tensile and Compressive Loading Using the Crystalline Plasticity Finite Element Method [37.3, Issue 1, 2021, Pages 59-69]
Asempour, A. Processing Of Thin Magnesium Tubes By Tubular Channel Angular Pressing (TCAP) Process With Trapezoidal Geometry [Volume 39, Issue 2, 2023, Pages 75-82]
Asempour, A. Investigating the effect of Texture Intensity on the Forming Limit Diagram of Magnesium Microtubes used in Stents using Crystal Plasticity Finite Element Modeling [Volume 40, Issue 2, 2024, Pages 15-24]
Asgari, 0. NUMERICAL ANALYSIS OF A GEOTHERMAL SNOW-MELTING SYSTEM ON A TYPICAL BRIDGE [Volume 23, 40.2, 2008, Pages 187-193]
Asgari, M. DERIVING THE SUPER - RESOLUTION ARRAY SENSOR POSITIONS THROUGH CTB [Volume 23, No . 38, 2007, Pages 11-19]
Asgari, T. MODELING OF COKE FORMATION AND ITS EFFECT ON STYRENE MONOMER CATALYST DEACTIVATION [Volume 21, No . 32, 2006, Pages 65-75]
Asghari, M. Study the effect of suction flow control on the aerodynamic performance of a wind turbine using 2D section numerical Results [37.3, Issue 1, 2021, Pages 79-89]
Asghari, Mohsen A Ring Selection Platform for Treatment of Keratoconus [Volume 41, Issue 2, 2026, Pages 17-31]
Asgharzadeh, H. ASSESSMENT AND SELECTION OF DIRECT RAPID TOOLING PROCESSES USING ANALYTICAL HIERARCHY PROCESS [Volume 20, Issue 28, 2004, Pages 3-14]
Ashjaee, M. EXPERIMENTAL STUDY OF SWIRL SPRAY PATTERN [Volume 21, Issue 29, 2005, Pages 37-46]
Ashouri-sanjani, M. Evaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]
Ashraf Talesh, S. S. CATALYST SYNTHESIS, CONSTRUCTION AND MODELING OF FLUIDIZED BED REACTORS FOR OXIDIZING METHANOL TO
FORMALDEHYDE [Volume 24, No . 41, 2008, Pages 3-8]
Askari, M. INVESTIGATION OF SCALE EFFECT CORRECTION FACTOR IN SHIP RESISTANCE MODEL TEST [Volume 23, 40.2, 2008, Pages 171-176]
Askari Far, K. AN IMPROVEMENT OF PRODUCTIVITY OF TRANSPORTATION SYSTEM BY USING MATHEMATICAL PROGRAMMING AND AHP [Volume 20, Issue 28, 2004, Pages 92-100]
Askari Seyedshokry, F. EFFECT OF SURFACE ROUGHNESS ON THE AERODYNAMIC PERFORMANCE OF A SECTION OF A WIND TURBINE BLADE [Volume 23, No . 37, 2007, Pages 49-58]
Assari, M. R. HEAT AND MOISTURE SIMULATION OF A DRYING PROCESS WITH A TWO FLUID MODEL IN A FLUIDIZED BED [Volume 18, Issue 22, 2002, Pages 54-58]
Asvad, M. Design And Comparison Of Combined, Parabolic, And Flat Plate Reflectors On The Performance Of A Solar Module [Volume 39, Issue 2, 2023, Pages 13-24]
Ataei, M..M. SIMULTANEOUS ATTITUDE AND BENDING-TORSIONAL-VIBRATION CONTROL OF A SATELLITE WITH MULTI-SECTION FLEXIBLE PANELS USING PDE BASED BOUNDARY CONTROL-OBSERVER [38.3, Issue 1, 2022, Pages 51-62]
Ayatollahi, M.R Investigating of size-dependent buckling and instability caused by support forces and electrostatic field in porous annular microplates [Volume 40, Issue 1, 2024, Pages 75-84]
Azami, M. ASSESSMENT AND SELECTION OF DIRECT RAPID TOOLING PROCESSES USING ANALYTICAL HIERARCHY PROCESS [Volume 20, Issue 28, 2004, Pages 3-14]
Azami, M. EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A LASER SINTERED LOW ALLOY STEEL [Volume 23, No. 39, 2007, Pages 61-66]
Aziztaemeh, H. TURBIDITY REMOVAL IN PRODUCTION OF CLARIFIED POMEGRANATE JUICE WITH GOOD QUALITY [Volume 24, No . 41, 2008, Pages 49-52]
Babakhani, B . THE EFFECT OF MICROSTRUCTURE ON MECHANICAL PROPERTIES OF 4340 STEEL [Volume 21, No . 32, 2006, Pages 25-30]
Babakhani, Mahdi Static bending analysis of single walled carbon nanotubes using shell theory and nonlocal elasticity [(Articles in Press)]
Babamiri, S.M. EBV,AN APPROACH TO AUTOMATIC CONSTRUCTING OF RUN - TIME VERIFIER OF THE SAFETY - CRITICAL SOFTWARE [Volume 23, No . 38, 2007, Pages 81-101]
Bagheri, R. ESTIMATION OF NON SINUSOIDAL VOLTAGE EFFECTS ON THE POWER CONSUMPTION OF AN AGGREGATED LOAD ON THE BASIS OF IMPROVED LOAD MODEL [Volume 25, Issue 52, 2010, Pages 21-29]
Bahadori Nejad, M. Sun moves across the energy [Volume 10, No . 8, 1995, Pages 51-58]
Bahrami, M. MODEL DEVELOPMENT FOR STARTUP AND DAMPING OF A STANDING WAVE THERMO-ACOUSTIC ENGINE [38.3, Issue 1, 2022, Pages 113-125]
Bakhshalipour, A. STATIC SURFACE PRESSURE MEASUREMENT ON A SECTION OF A WIND TURBINE BLADE [Volume 24, Issue 42, 2009, Pages 59-65]
Bakhshalipour kalkhoran, A. EFFECT OF SURFACE ROUGHNESS ON THE AERODYNAMIC PERFORMANCE OF A SECTION OF A WIND TURBINE BLADE [Volume 23, No . 37, 2007, Pages 49-58]
Bakhshandeh Amniye, H NUMERICAL ANALYSIS OF BLAST - INDUCED WAVE PROPAGATION IN ROCK MASSES CONTAINING BEDDING PLANES [Volume 21, No . 32, 2006, Pages 57-64]
Bakouei, M. Numerical investigation of affecting parameters on the thermal and dynamic performance of a hot isostatic pressing furnace [38.3, Issue 1, 2022, Pages 85-97]
Bakshi Damani, R. MULTIUSER DETECATION OF DS/CDMA SIGNALS IN MULTIPATH FADING CHANNELS [Volume 19, No. 25, 2003, Pages 86-92]
Barkhordari, R. Numerical and experimental analysis of anisotropic damage growth and martensitic phase change due to plastic strain at ambient temperature [Volume 40, Issue 2, 2024, Pages 97-106]
Bazargan, V. Experimental Investigation and Simulation of Controlled Size Droplet Formation in a Capillary Microdevice [Volume 40, Issue 2, 2024, Pages 76-84]
Bazdar, S. APPLICATION OF RETURN MAPPING ALGORITHM IN ANALYSIS OF PRESSURE VESSELS WITH NONLINEAR KINEMATIC HARDENING BEHAVIOR [Volume 25, 51.2, 2010, Pages 43-48]
Behbahani-Nejad, M. PREDICTION OF AERODYNAMIC COEFFICIENTS OF A SUPERSONIC WING USING BOUNDARY ELEMENT METHOD [29.3, Issue 1, 2013, Pages 87-92]
Behbahani-nia, A. THERMOECONOMICAL OPTIMIZATION AND EXERGY ANALYSIS OF A VAPOR COMPRESSION REFRIGERATION CYCLE [Volume 24, 46.2, 2009, Pages 157-162]
Behbahaninia, Ali NUMERICAL SOLUTION OF CONJUGATE MIXED CONVECTION AND RADIATION IN A HORIZONTAL ELECTRONIC BOARD
WITH RECTANGULAR HEAT SOURCES [Volume 25, 51.2, 2010, Pages 25-32]
Behbhaninia, A. SOLUTION INVERSE HEAT CONDUCTION PROBLEMS USING DUAL RECIPROCITY BOUNDARY ELEMENT METHOD [Volume 20, Issue 26, 2004, Pages 26-33]
Behdari, M. THE SECURITY ARCHITECTURE OF GSM MOBILE PHONE AND ITS VULNERABILITIES [Volume 23, No . 38, 2007, Pages 31-41]
Behnia, F. DETERMINING THE REQUIRED INFORMATION IN SCANNING OF THE OIL PIPLEINE CORROSIONS [Volume 23, No . 38, 2007, Pages 67-74]
Behnoud, V. Energy, exergy, and exergoeconomic analysis of power generation cycle based on independent geothermal and solar energy [38.3, Issue 2, 2022, Pages 87-96]
Behzad, M. Intelligent Fault Detection of Rolling Element Bearing under Variable Operating Conditions by Convolutional Neural Network using Time and Frequency Domain Signals [Volume 40, Issue 2, 2024, Pages 38-51]
Behzadi, M. DESIGN AND FABRICATION OF A PNEUMATIC DISTANCE SENSOR FOR LASER AUTOFOCUS SYSTEMS [31.3, Issue 1, 2016, Pages 55-64]
Behzadi, Mohammad Matin Numerical investigation of affecting parameters on the thermal and dynamic performance of a hot isostatic pressing furnace [38.3, Issue 1, 2022, Pages 85-97]
Behzadipour, S. DESIGN AND ANALYSIS OF A WEARABLE REHABILITATION ROBOT FOR ANKLE JOINTS [31.3, Issue 1, 2016, Pages 89-94]
Behzadipour, M. R. STATIC MODELS FOROREDICTING THE EFFECTS OF SUPPORTS ON ASSISTANCE MACHINING FLATNESS [Volume 18, Issue 22, 2002, Pages 24-33]
Behzadipour, S. Proposing an empirical motion-time pattern for human gaze behavior in different social situations [Volume 40, Issue 1, 2024, Pages 3-13]
Beygzadeh, M.R. THE ROLE OF INFORMATION NETWORKS AND MULTIMEDIA TECHNOLOGY IN ADVANCEMENT OF SCIENTIFIC AND TECHNICAL LEVEL OF SEVERAL COUNTRIES [Volume 18, NO. Special ((IT)), 2002, Pages 25-30]
Bina, B. PERFORMANCE COMPARISON OF HORIZONTAL- FLOW ANAEROBIC IMMOBILIZED SLUDGE (HAIS) AND UASB REACTORS USING A SYNTHETIC SUBSTRATE [Volume 21, Issue 29, 2005, Pages 63-70]
Bodaghabadi, Sh. USING THREE DIMENSIONAL UNSTRUCTURED GRID TO SOLVE EULER EQUATIONS [Volume 18, Issue 22, 2002, Pages 17-23]
Borghei, M. Computer simulation of wastewater Tsfyhkhanhhay [Volume 14, No .15, 1999, Pages 46-54]
Borghei, M. Of industrial waste water and how they Tsfyhpzyry [Volume 8, Issue 3, 1992, Pages 57-58]
Borhani, H. And an encoding designed to simulate a real-time LPC [Volume 9, Issue 4, 1992, Pages 55-59]
Borji, S. ACCURATE SHOCK CAPTURING BY SELECTION OF A SUITABLE ARITIFICAL VISCOSITY [Volume 23, 40.2, 2008, Pages 177-186]
Brekshely, F. Look at the world oil industry in the 1990s [Volume 9, No . 6, 1993, Pages 69-74]
C
Chaji, A.R. Investigating the stability of the yield strength of the friction stir welding joint of similar amorphous thermoplastic based on the Ordered Weighted Averaging operators [Volume 40, Issue 2, 2024, Pages 64-75]
Cheraghi, B. Developing an Interface Tracking Coupled Solver for Solving two Phase Flow Fields at Low Reynolds Numbers in foam-extend Platform [Volume 40, Issue 1, 2024, Pages 97-110]
D
Dadgar Asl, Y. NUMERICAL AND EXPERIMENTAL STUDY OF EFFECTIVE PARAMETERS ON THE LOAD AND FORMING TORQUE OF ROLLS IN THE COLD ROLL FORMING OF SYMMETRIC CHANNEL SECTION [32.3, Issue 2, 2016, Pages 91-97]
Dallali, A. EXPERIMENTAL STUDY OF THE EFFECT OF SURFACE TYPE ON THE POOL BOILING HEAT TRANSFER CHARACTERISTICS IN THE PRESENCE OF NANOFLUIDS WITH HYBRID BASE FLUID [36.3, Issue 2, 2020, Pages 83-95]
Danshkararasth, P. STUDY OF WIND EFFECTS ON FREE WATER SURFACE EVAPORATION FROM CHAHNIMEH RESERVOIR IN SISTAN, USING THE DALTONIAN METHOD [Volume 23, No . 37, 2007, Pages 13-20]
Dardel, M. Investigation Of The Effect Of Shape Memory Alloy On Buckling And Post-Buckling Of Composite Panels In Supersonic Flow With Thermal Heating [Volume 39, Issue 2, 2023, Pages 3-11]
Dargahi, H. Education, technology and macroeconomic stability in the process of economic development [Volume 12, Issue 12, 1997, Pages 3-12]
Darivandi, N. CRACK INTERACTION AFFECTED BY LONGITUDINAL WAVES [Volume 23, No . 37, 2007, Pages 29-35]
Daryaei, S. Optimization of the Colebrook-White Equation based on experimental data [38.3, Issue 2, 2022, Pages 47-54]
Dashti, M. A STUDY OF DIRECT PHOTOCATALYTIC CONVERSION OF METHANE INTO METHANOL FOR DMFC USAGE [Volume 19, No. 24, 2003, Pages 45-48]
Davari, A. R. AN EXPERIMENTAL INVESTIGATION OF THE EFFECTS OF COMPRESSIBILITY AND REDUCED FREQUENCY ON THE UNSTEADY AERODYNAMIC BEHAVIOR OF A FIGHTER MODEL [Volume 21, Issue 31, 2005, Pages 39-46]
Davari, A.R. AN INVESTIGATION OF THE AERODYNAMIC CHARACTERISTICS OF SUPERSONIC WRAPAROUND FIN MISSILES USING NUMERICAL SIMULATION AND WIND TUNNEL EXPERIMENTS [Volume 18, Issue 21, 2002, Pages 31-36]
Davari, A.R. AN EXPERIMENTAL STUDY OF THE WORTEX STRUCTURE OVER DELTA WINGS [Volume 17, No . 19, 2001, Pages 3-10]
Davari, A.R. Experimental acoustic study of small horizontal axis wind turbines based on computational fluid dynamics and artificial intelligence approaches [Volume 40, Issue 2, 2024, Pages 52-63]
Davoodabadi, A. Intelligent Fault Detection of Rolling Element Bearing under Variable Operating Conditions by Convolutional Neural Network using Time and Frequency Domain Signals [Volume 40, Issue 2, 2024, Pages 38-51]
Davoudabadi Farahani, S. THERMODYNAMIC AND ECONOMIC OPTIMIZATION OF THE REFRIGERATION SYSTEM IN A BUILDING [35.3, Issue 2, 2019, Pages 107-116]
Dehghanian, Ch. STUDY OF EFFECTIVE PARAMETERS ON CORROSION RESISTANCE OF PLASMA ELECTROLYTIC NITROCARBURISED 316L AUESTENITIC STAINLESS STEEL [Volume 23, No. 39, 2007, Pages 67-73]
Dehghan Manshadi, M. EXPERIMENTAL INVESTIGATION OF TURBULENT FLOW AROUND A 3D SQUARE CYLINDER WITH WALL EFFECT [30.3, Issue 1, 2014, Pages 65-77]
Dehghanzadeh Reihani, R. THE EFFECT OF ORGANIC LOADING RATE ON THE BIOLOGICAL REMOVAL OF TOLUENE AND XYLENE FROM CONTAMINATED GAS STREAMS [Volume 20, Issue 26, 2004, Pages 82-87]
Delijani, E. UNSTEADY SOLUTION OF THE LINEAR AND NONLINEAR PRESSURE EQUATION IN SINGLE-PHASE OIL RESERVOIRS,
USING THE GREEN ELEMENT METHOD [Volume 25, No . 50, 2009, Pages 41-45]
Doniavi, A. Flexibility and Geometric Optimization of a New Structure for a Polymer Stent with the Finite Element Method [Volume 40, Issue 1, 2024, Pages 15-23]
Dorali, M. MOTION ANALYSIS OF A MANIPULATOR MOUNTED ON A VEHICLE WITH SUSPENSION SYSTEM [Volume 20, Issue 26, 2004, Pages 3-9]
Dorali, M. FINANCIAL INDEPENDENCE OF UNIVERCITIES: A MEANS FOR PROPER USE OF ACADEMIC POTENTIALS [Volume 15, No. 17, 1999, Pages 35-40]
Ehsan, M. A NOVEL CONTROL STRATEGY FOR POWER SYSTEM STABILITY IMPROVEMENT USING FUZZY LOGIC CONTROLLED STATCOM WITH DIFFERENT INPUT SIGNALS [Volume 25, Issue 52, 2010, Pages 47-56]
Ehsan, M. A FEASIBILITY STUDY TO SUPPLY DISTRIBUTED LOADS ALONG HIGH VOLTAGE TRANSMISSION LINE [Volume 17, NO. 20, 2002, Pages 3-7]
Ekrami, A. A. EFFECT OF TRANSIENT LIQUID PHASE DIFFUSION BONDING ON MECHANICAL PROPERTIES OF AISI 304 STAINLESS STEEL [Volume 23, No. 39, 2007, Pages 5-9]
Ekrami, A.A. MICROSTRUCTURE PROPERTIES RELATIONSHIP IN TRANSIENT LIQUID PHASE DIFFUSION BONDS MADE IN MA 758 SUPERALLOY [Volume 19, No. 24, 2003, Pages 22-26]
Ekrami, A.A. THE EFFECT OF MICROSTRUCTURE ON MECHANICAL PROPERTIES OF 4340 STEEL [Volume 21, No . 32, 2006, Pages 25-30]
Elliott, J. Global attitudes toward technology transfer [Volume 9, Issue 4, 1992, Pages 42-46]
Elyasi, H. Different levels of development and its role in technology [Volume 9, Issue 4, 1992, Pages 19-21]
Emadi, M. PERFORMANCE COMPARISON FOR SPECTRAL-BASED DOA ESTIMATION ALGORITHMS AND PROPOSAL OF A HIGH-RESOLUTION AND LOW COMPUTATIONAL COST ALGORITHM [Volume 25, Issue 52, 2010, Pages 63-69]
Emami, M. R. PRESSURE ETIMATION IN HDROFORMING OF SHEET METALS USING THE UPPER BOUND TECHNIQUE [Volume 23, No . 37, 2007, Pages 71-79]
Emdad, H. A 3-DIMENTIONAL EULER SOLUTION FOR SUPERSONIC FLOWS USING ROES METHOD WITH EXPLICIT AND IMPLICIT TECHNIQUES [Volume 20, Issue 26, 2004, Pages 73-81]
Eshghi, K. AN IMPROVEMENT OF PRODUCTIVITY OF TRANSPORTATION SYSTEM BY USING MATHEMATICAL PROGRAMMING AND AHP [Volume 20, Issue 28, 2004, Pages 92-100]
Eshraghi, M. R. ANALYTICALLY SOLUTION OF MASS EQUATIONS, NONLINEAR SPRINGS WITH EFFECTIVE WIND FORCE UNDER DYNAMICAL LOAD [Volume 21, Issue 29, 2005, Pages 3-6]
Eshraghnia Jahromi, A. SYSTEMATIC APPROACH FOR ANALYSIS OF UNIVERSITY-INDUSTRY RELATION IN IRAN [Volume 17, NO. 20, 2002, Pages 50-61]
Eslamimanesh, V. OPTIMIZATION OF OXIDATIVE COUPLING OF METHANE OVER PEROVSKITE CATALYST AND OCM KINETICS MODELING BY GENETIC ALGORITH [Volume 25, No . 50, 2009, Pages 15-24]
Esmaeili, N. A NEW METHOD FOR MANEUVERABILITY IMPROVEMENT OF ARTICULATED HEAVY VEHICLES [31.3, Issue 1, 2016, Pages 41-53]
Esmaeili, H. DESIGN AND ANALYSIS OF NEW ALGORITHMS FOR SOLVING CERTAIN SYSTEMS AND LINEAR PROGRAMS OVER REAL AND INTEGER SPACES [Volume 19, No. 25, 2003, Pages 13-20]
Esmaieli, A. INCENSEMENT OF GAS TURBINE POWER IN A COMBINED CYCLE, BASED ON OPTIMIZED DESIGN OF A HEAT RECOVERY STEAM GENERATOR (HRSG) [30.3, 2.2, 2014, Pages 15-20]
Esmaillzadeh, N. THE ROLE OF BIOTECHNOLOGY IN THE PRODUCTION OF SECONDARY PLANT METABOLITES [Volume 16, No . 16, 2000, Pages 50-57]
Esmailzadeh, H. NUMERICAL AND EXPERIMENTAL INVESTIGATION OF THE MOTION OF A DEFORMABLE SOLID BODY AND ITS IMPACT ON A RIGID SUBSTRATE [31.3, Issue 2, 2015, Pages 15-23]
Esmati, A. THE EFFECT OF RESIDUAL STRESSES ON THE FATIGUE BEHAVIOR OF ROTARY COMPONENTS [Volume 25, 51.2, 2010, Pages 77-83]
Etemadi, S. PASSING THROUGH NARROW GATES FOR A MULTI-AGENT SYSTEM [31.3, Issue 1, 2016, Pages 127-135]
Etemadi, M. Master of Science in mirror tests [Volume 8, Issue 1, 1991, Pages 30-33]
Etemadi Haghighi, Sh. Numerical and experimental analysis of anisotropic damage growth and martensitic phase change due to plastic strain at ambient temperature [Volume 40, Issue 2, 2024, Pages 97-106]
Faez, R. SIMULATION OF 2D ELCTRON GAS IN ALGAN /GAN HEMT AND INVESTIGATION OF ITS BREAKDOWN VOLTAGE [Volume 23, No . 38, 2007, Pages 3-9]
Faez, R. APPLICATION OF QUANTUM CORRECTED MONTE CARLO METHOD FOR A RESONANT TUNNELING DIODE [Volume 23, No . 38, 2007, Pages 109-113]
Faghieh Khorasani, A.R. A CAE SIMULATION MODEL FOR VEHICLE AIR CONDITIONING SYSTEM [Volume 20, Issue 26, 2004, Pages 43-50]
Faghih, N. Prospective information on technology transfer [Volume 9, Issue 5, 1993, Pages 13-19]
Faghihi Sani, M.A. PREPARATION OF NANOPOWDERS AND THEIR EFFECTS ON THE PROPERTIES AND MICROSTRUTCTURE OF ZNO VARISTORS [Volume 23, No. 39, 2007, Pages 41-46]
Fahimi, M. FUTURE VISION: INFORMATION TECHNOLOGY PROSPECTS IN THE NEW MILLENNIUM [Volume 18, NO. Special ((IT)), 2002, Pages 8-13]
Fahimi, M. COOPERATION POTENTIALITIES: UNIVERSITIES AND NATIONAL DEVELOPMENT RESEARCH INSTITUTES [Volume 15, No. 17, 1999, Pages 62-65]
Falahi, M.M. Investigation of the local heating effect on the aerodynamic forces over a cylinder at Reynolds [Volume 39, Issue 1, 2023, Pages 69-77]
Falamaki, M. Inside and outside our universities [Volume 8, Issue 1, 1991, Pages 16-17]
Fallah, Esmail A NEW APPROACH IN MODELING DYNAMIC EFFECTS OF MAGNETIC FIELD IN FERROMAGNETIC MATERIALS, USING FINITE ELEMENT METHOD [Volume 23, No . 38, 2007, Pages 43-50]
Fallah, N. PATTERN OF THEAFLAVIN CHANGES IN IRANIAN BLACK TEA-EVALUATION OF THE CTC AND CONVENTIONAL PROCESS IN THE ROLLING OF GREEN TEA LEAVES [Volume 21, No . 32, 2006, Pages 49-56]
Fallah, Saleh Design, Manufacturing and Testing of a Cylindrical Vibrating Gyroscope [Volume 41, Issue 1, 2025, Pages 1-11]
Fallahi, F. Multi-objective optimization of hydraulic engine mounts vibrational behavior by non-dominated sorting genetic algorithm [37.3, Issue 1, 2021, Pages 49-58]
Farahani, A. Intelligent Fault Detection of Rolling Element Bearing under Variable Operating Conditions by Convolutional Neural Network using Time and Frequency Domain Signals [Volume 40, Issue 2, 2024, Pages 38-51]
Farahani, M. A design algorithm and numerical investigation of a water-jacket cooling system for a high-altitude simulator diffuser [Volume 40, Issue 1, 2024, Pages 25-37]
Farahani, Mohammad Experimental Investigation of the Effect of Pre-evacuation on the Starting Performance of a Vacuum Simulator Diffuser with Conical Nozzles of Different Expansion Ratios [Volume 41, Issue 2, 2026, Pages 3-16]
Farahi, GH. THE EFFECT OF RESIDUAL STRESSES ON THE FATIGUE BEHAVIOR OF ROTARY COMPONENTS [Volume 25, 51.2, 2010, Pages 77-83]
Farahi Ghehi, F. Comparison of experimental results between using auxetic shoe, conventional shoe and barefoot on the kinematics of vertebral column during drop vertical jump [Volume 39, Issue 1, 2023, Pages 89-98]
Farahmand, F. DESIGN AND ANALYSIS OF A WEARABLE REHABILITATION ROBOT FOR ANKLE JOINTS [31.3, Issue 1, 2016, Pages 89-94]
Farahmand, F. KNEE MUSCULAR AND JOINT FORCES WHILST RISING FROM A DEEP SQUAT [Volume 18, Issue 22, 2002, Pages 66-72]
Farahmand, F. MEASUREMENT AND COMPARISON OF THE NET MOMENTS OF HUMAN JOINTS DURING WEIGHT LIFTING AT DIFFERENT SPEEDS [Volume 23, No . 37, 2007, Pages 81-88]
Faraj, S. Experimental Study Of Multi-Point Incremental Forming For Conical Parts [Volume 39, Issue 2, 2023, Pages 37-44]
Farajollahi, A.H. NUMERICAL INVESTIGATION ON THE EFFECT OF INCREASING TURBULENCE INTENSITY AND CHANGING THE INJECTION
ANGLE ON THE PERFORMANCE AND EMISSION OF CATERPILLAR MARINE DIESEL ENGINE [38.3, Issue 1, 2022, Pages 99-112]
Fardadi Shilsar, M.J. Analytical solution of mass transport equation in river network [38.3, Issue 1, 2022, Pages 35-49]
Farhad Abtahi, S.F. INVESTIGATION OF ACCURACY OF INTEGRATED INERTIAL-RADAR NAVIGATION SYSTEMS IN AUTOLANDING OF UNMANNED
AIR VEHICLES [32.3, Issue 2, 2016, Pages 53-62]
Farooji, N. OPTIMIZATION OF OXIDATIVE COUPLING OF METHANE OVER PEROVSKITE CATALYST AND OCM KINETICS MODELING BY GENETIC ALGORITH [Volume 25, No . 50, 2009, Pages 15-24]
Farrokh, A. Nanoparticles in the turbulent flow behind the backward step by Eulerian-Lagrangian method [Volume 40, Issue 1, 2024, Pages 47-60]
Farshad, M. SRM MODELING: IMPROVEMENT OF MILLER MODEL [Volume 21, No.30, 2005, Pages 51-63]
Farshchi, H. R. EXPERIMENTAL STUDY OF A ONE SIDED MASONRY WALL REHABILITATION DESIGN FOR EARTHQUAKE DAMAGED BUILDINGS [Volume 23, No . 37, 2007, Pages 3-11]
Farshchi, M. EXPERIMENTAL DETERMINATION OF LIQUID ENGINES COMBUSTION CHAMBER ACOUSTIC CHARACTERISTICS [Volume 23, No . 37, 2007, Pages 89-97]
Farzan, F. A SEMI-ANALYTICAL SOLUTION FOR LOW-VELOCITY IMPACT ANALYSIS OF FUNCTIONALLY GRADED RECTANGULAR PLATES [30.3, 2.2, 2014, Pages 67-74]
Farzaneh, F. ANALYSIS OF SENSITIVITY OF FEED - FORWARD LINE ARIZATION SYSTEM TO AMPLITUDE AND PHASE MISMATCH, APPLIED IN MICROWAVE POWER AMPLIFIERS [Volume 23, No . 38, 2007, Pages 103-108]
Fatehi, H. EXPERIMENTAL DETERMINATION OF LIQUID ENGINES COMBUSTION CHAMBER ACOUSTIC CHARACTERISTICS [Volume 23, No . 37, 2007, Pages 89-97]
Fathi, A. KINEMATIC AND DYNAMIC OPTIMIZATION OF A PLANAR FOUR-BAR LINKAGE WITH JOINT CLEARANCE [30.3, 2.2, 2014, Pages 97-104]
Fathi, A.R. USING A SLIP LINE FLELD IN THE MODELING OF GENERAL SHAPE DEEP DRAWN PARTS [Volume 18, Issue 22, 2002, Pages 34-40]
Fathi, A.R. Investigation Of The Effect Of Shape Memory Alloy On Buckling And Post-Buckling Of Composite Panels In Supersonic Flow With Thermal Heating [Volume 39, Issue 2, 2023, Pages 3-11]
Fathi, M. Integrated robust guidance and control of VTVL reusable launch vehicle at pre-landing phase using sliding mode control [Volume 39, Issue 1, 2023, Pages 3-13]
Fathi Jegarkandi, M. Reliability-Based Multidisciplinary Design Optimization Under Uncertainty for Reusable Flexible Space Launcher utilizing NSGA-II [Volume 40, Issue 1, 2024, Pages 61-74]
Fathi Jegarkandi, M. Fractional Order Sliding Mode Controller (FOSMC) Design for Attitude Control of a Satellite with Coupled Rigid–Flexible Structures Using Fractional Order Transfer Function [Volume 40, Issue 2, 2024, Pages 3-14]
Fayazbakhsh, M. A. Communication and the phenomenon of student [Volume 11, Issue 11, 1996, Pages 51-59]
Fazeli, H. AN INVESTIGATION OF THE AERODYNAMIC CHARACTERISTICS OF SUPERSONIC WRAPAROUND FIN MISSILES USING NUMERICAL SIMULATION AND WIND TUNNEL EXPERIMENTS [Volume 18, Issue 21, 2002, Pages 31-36]
Firoozabadi, b. MODELING OF TWO-PHASE FLOW IN POROUS MEDIA BY MIXED-HYBRID FINITE-ELEMENT METHOD [Volume 25, 51.2, 2010, Pages 59-68]
Firoozabadi, B. NUMERICAL INVESTIGATION OF INLET BAFFLE FEATURES EFFECTS ON THE HYDRAULIC PERFORMANCE OF PRIMARY SETTLING TANKS [Volume 23, 40.2, 2008, Pages 109-114]
Firouzabadi, B. INVESTIGATION OF THEORITICAL AND EXPERIMENTAL FLOW PATTERN OF DILUTE SLUDEGE IN CONVERGENT DIVERGENT CONDUIT [Volume 18, Issue 21, 2002, Pages 64-70]
Firuzi, R. NUMERICAL INVESTIGATION ON THE EFFECT OF INCREASING TURBULENCE INTENSITY AND CHANGING THE INJECTION
ANGLE ON THE PERFORMANCE AND EMISSION OF CATERPILLAR MARINE DIESEL ENGINE [38.3, Issue 1, 2022, Pages 99-112]
F. Khorasani, A. R. A CAE SIMULATION MODEL FOR THERMAL MODELING OF VEHICLE PASSENGER COMPARTMENT [Volume 21, Issue 29, 2005, Pages 7-12]
Foladi, N. A NEURAL NETWORK BASED ACCELERATION TECHNIQUE OF GENETIC ALGORITHM CONVERGENCE IN AERODYNAMIC DESIGN OPTIMIZATION [Volume 23, 40.2, 2008, Pages 101-107]
Forghani, A.R. APPLICATION OF THE EXTENDED FINITH ELEMENT METHOD (X-FEM) IN COHESIVE CRACK MODELING [Volume 23, No . 37, 2007, Pages 21-27]
Forohideh, M. And legal position of monitoring the transfer of technology [Volume 9, Issue 4, 1992, Pages 47-48]
Fotouhi, M. Flexibility and Geometric Optimization of a New Structure for a Polymer Stent with the Finite Element Method [Volume 40, Issue 1, 2024, Pages 15-23]
Fouladi, N. A design algorithm and numerical investigation of a water-jacket cooling system for a high-altitude simulator diffuser [Volume 40, Issue 1, 2024, Pages 25-37]
Fouladi, Nematollah Experimental Investigation of the Effect of Pre-evacuation on the Starting Performance of a Vacuum Simulator Diffuser with Conical Nozzles of Different Expansion Ratios [Volume 41, Issue 2, 2026, Pages 3-16]
Foumani, M.S. A NEW METHOD TO OBTAIN THE STABILITY REGION OF A HUMANOID ROBOT [27.3, Issue 1, 2011, Pages 83-88]
Frdad, A. SURFACE REACTIONS IN ALUMINUM DUST COMBUSTION AND BURNING TIME [Volume 23, 40.2, 2008, Pages 87-91]
Frhanieh, B. AN INVESTIGATION OF THE AERODYNAMIC CHARACTERISTICS OF SUPERSONIC WRAPAROUND FIN MISSILES USING NUMERICAL SIMULATION AND WIND TUNNEL EXPERIMENTS [Volume 18, Issue 21, 2002, Pages 31-36]
Ganjiani, M. Numerically and Experimentally Investigation of the Effect of Anisotropy and Stress Triaxiality on the Fracture Strain [Volume 39, Issue 1, 2023, Pages 27-34]
Ganjiani, M. Numerical and experimental analysis of anisotropic damage growth and martensitic phase change due to plastic strain at ambient temperature [Volume 40, Issue 2, 2024, Pages 97-106]
Ganjiani, Mehdi Experimental and Numerical Analysis of Hydrostatic Pressure in Ductile Fracture of AL-6061T6 [Volume 41, Issue 2, 2026, Pages 77-92]
Gaskarinezhad, Seyed Javad Numerical Study of the Effect of Flow Control Using Plasma Actuator on the Aerodynamic Performance of a VAWT [Volume 41, Issue 2, 2026, Pages 63-75]
Ghaderi, M. PERFORMANCE ANALYSIS AND IMPROVEMENT OF MOTION ESTIMATION TECHNIQUES WITH APPLICATION TO VIDEO RESTORATION [Volume 19, No. 25, 2003, Pages 100-109]
Ghadiri, M. INVESTIGATION OF THE NONLINEAR VIBRATION OF A CABLE- MASS SYSTEM, DUE TO THE MOTION OF AN ATTACHED ACCELERATING MASS [Volume 25, 51.2, 2010, Pages 15-23]
Ghaffarzadeh, S. Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
Ghafouri, A. A NOVEL CONTROL STRATEGY FOR POWER SYSTEM STABILITY IMPROVEMENT USING FUZZY LOGIC CONTROLLED STATCOM WITH DIFFERENT INPUT SIGNALS [Volume 25, Issue 52, 2010, Pages 47-56]
Ghafourian, A. EXPERIMENTAL INVESTIGATION OF A PULSE COMBUSTOR FOR INDUSTRIAL APPLICATION [Volume 20, Issue 26, 2004, Pages 65-72]
Ghafouri fard, H. SRM MODELING: IMPROVEMENT OF MILLER MODEL [Volume 21, No.30, 2005, Pages 51-63]
Ghafuri Fard, H. INFORMATION TECHNOLOGY AND FUTURE PROSPECTS [Volume 18, NO. Special ((IT)), 2002, Pages 3-7]
Ghajar, R. A SEMI-ANALYTICAL SOLUTION FOR LOW-VELOCITY IMPACT ANALYSIS OF FUNCTIONALLY GRADED RECTANGULAR PLATES [30.3, 2.2, 2014, Pages 67-74]
Ghalehbandi, Seyed Mahmoud Design, Manufacturing and Testing of a Cylindrical Vibrating Gyroscope [Volume 41, Issue 1, 2025, Pages 1-11]
Ghanbari, A. WALKING STABILITY ON A SLOPE FOR A PLANAR 3-LINK BIPED ROBOT VIA ORBITAL STABILIZATION UPON A ZERO DYNAMIC MANIFOLD [30.3, 2.2, 2014, Pages 83-95]
Ghanbarpour Asl, H. INVESTIGATION OF ACCURACY OF INTEGRATED INERTIAL-RADAR NAVIGATION SYSTEMS IN AUTOLANDING OF UNMANNED
AIR VEHICLES [32.3, Issue 2, 2016, Pages 53-62]
Ghannad, M. A. STRAIN INPUT ENERGY IN NEAR-FAULT GROUND MOTIONS [Volume 24, Issue 42, 2009, Pages 35-39]
Gharehpetian, G. ESTIMATION OF NON SINUSOIDAL VOLTAGE EFFECTS ON THE POWER CONSUMPTION OF AN AGGREGATED LOAD ON THE BASIS OF IMPROVED LOAD MODEL [Volume 25, Issue 52, 2010, Pages 21-29]
Ghasemi, A.R. QUALITATIVE AND QUANTITATIVE STUDY OF MICROSTRUCTURAL CHARACTERISTICS OF A356 CAST ALLOY AND THE CORRELATED MECHANICAL PROPERTIES [Volume 20, Issue 28, 2004, Pages 38-42]
Ghasemi, M. NUMERICAL SOLUTION OF CONJUGATE MIXED CONVECTION AND RADIATION IN A HORIZONTAL ELECTRONIC BOARD
WITH RECTANGULAR HEAT SOURCES [Volume 25, 51.2, 2010, Pages 25-32]
Ghasemzadeh, N. Energy, exergy, and exergoeconomic analysis of power generation cycle based on independent geothermal and solar energy [38.3, Issue 2, 2022, Pages 87-96]
Gholipour, M. MEASUREMENT AND COMPARISON OF THE NET MOMENTS OF HUMAN JOINTS DURING WEIGHT LIFTING AT DIFFERENT SPEEDS [Volume 23, No . 37, 2007, Pages 81-88]
Ghorat, K. CANTALOUPE (SAMSORY) JUICE PRODUCTION AND SENSOTY EVALUATION OF THE JUICE [Volume 20, Issue 28, 2004, Pages 61-64]
Ghorbanian, K. Numerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
Ghorbanian, K. Sensitivity Analysis of the Dominant Design Parameters of Supersonic Separators
for Gas Compositions [37.3, Issue 1, 2021, Pages 111-123]
Golabi, Siavash Nzamgra comprehensive approach to the research and development [Volume 8, Issue 1, 1991, Pages 24-29]
Golafshani, A. A. GEOMETRICAL OPTIMIZATION OF TLPUSING GENETIC ALGORITHM METHOD BASED ON MINIMIZING DOWN TIME UNDER REGULAR SEA WAVES [Volume 21, Issue 31, 2005, Pages 47-56]
Golnabi, H. - [Volume 10, No . 7, 1994, Pages 62-64]
Golnbi, H. MEASUREMENTS OF DIFFUSE REFLECTION FROM DIFFERENT SURFACES [Volume 18, Issue 21, 2002, Pages 54-58]
Gorji, M. EXPERIMENTAL INVESTIGATION OF UNSTEADY BOUNDARY LAYER OVER A SUPERCRITICAL AIRFOIL [32.3, Issue 2, 2016, Pages 41-52]
Gorji, M. Design And Comparison Of Combined, Parabolic, And Flat Plate Reflectors On The Performance Of A Solar Module [Volume 39, Issue 2, 2023, Pages 13-24]
Goudarzi, Taha Characterization of the Linear Viscoelastic Properties of Materials by the Results of Nanoindentation Test [Volume 41, Issue 1, 2025, Pages 69-81]
G.Shayesteh, M. MULTIUSER DETECATION OF DS/CDMA SIGNALS IN MULTIPATH FADING CHANNELS [Volume 19, No. 25, 2003, Pages 86-92]
Haeri, M. SESIGN OF PREDICTIVE COMPENSATOR FOR SYSTEMS WITH INPUT CONSTRAINTS [Volume 21, No.30, 2005, Pages 23-29]
Haeri, S. M. STEADY STATE CHARACTERISTICS OF SANDY AND LIQUEFACTION EVALUATION OF THE AREA USING THIS CONCEPT [Volume 17, NO. 20, 2002, Pages 36-45]
Hafez Haghighat, S. M. PREDICTION OF GRAIN GROWTH IN PURE ALUMINUM USING THE MONTE CARLO METHOD [Volume 20, Issue 28, 2004, Pages 29-37]
Hafezi, M. PATTERN OF THEAFLAVIN CHANGES IN IRANIAN BLACK TEA-EVALUATION OF THE CTC AND CONVENTIONAL PROCESS IN THE ROLLING OF GREEN TEA LEAVES [Volume 21, No . 32, 2006, Pages 49-56]
Haghighi, E. A HIGH-RESOLUTION CENTRAL SCHEME FOR COMPOSITIONAL FLOW SIMULATIONS IN HYDROCARBON RESERVOI [27.3, Issue 2, 2011, Pages 37-46]
Haghighi, M. Mtalhyzshbyhsazy and effective parameters of heavy oil Brtvlyd Kkhrn Trkdarll Gravitational loss method to help steam injection (SAGD) [Volume 20, Issue 28, 2004, Pages 54-60]
Hairi Yazdi, M.R. Design of controller and intelligent adaptive neural identifier for innovative knee rehabilitation devices [38.3, Issue 2, 2022, Pages 3-8]
Haj Abbasi, M.A. DESIGN OF PLANAR ROBOTIC MANIPULATORS WITH REVOLUTE JOINTS BASED ON THE PSEUDO- ISOTROPY CRITERION [Volume 18, Issue 22, 2002, Pages 73-79]
Haj Fathalia, A. Technology development activities in the heavy industry sector [Volume 8, Issue 3, 1992, Pages 51-54]
Haji Norouzi, Sh. DETERMINING THE ORDER QUANTITY AND DISCOUNTING PLAN IN A TWO-LEVEL SUPPLY CHAIN [Volume 20, Issue 28, 2004, Pages 70-78]
Hajipour, Majid Energy Harvesting from a Flapping Hydrofoil with Prescribed Pitch Profile [Volume 41, Issue 1, 2025, Pages 55-68]
Haji-Saeid, M. The importance of new technologies to achieve energy [Volume 9, No . 6, 1993, Pages 45-51]
Hajiweisah, Farid Attitude Determination of Geosynchronous Satellites with Sun and Earth Sensors Using Artificial Intelligence Algorithms [(Articles in Press)]
Hakim javadi, M. DESIGN AND CONSTRUCTION OF PREMANUFACTURED GAS SEPARATORS FOR THE WASTEWATER INDUSTRY [Volume 20, Issue 26, 2004, Pages 88-92]
Hakim Javadi, M. OPERATION COMPARISON OF STATIC HEAD AND PUMP FEED OF WASTE WATER INTO THE UASB SYSTEM [Volume 18, Issue 21, 2002, Pages 59-63]
Hakim Javadi, M. INVESTIGATION OF THEORITICAL AND EXPERIMENTAL FLOW PATTERN OF DILUTE SLUDEGE IN CONVERGENT DIVERGENT CONDUIT [Volume 18, Issue 21, 2002, Pages 64-70]
Hasannia, S.H. EVALUATION AND COMPARISON OF STRAIN DISTRIBUTION IN THICK MICROALLOY AND PLAIN CARBON SHEET STEELS [Volume 23, No. 39, 2007, Pages 87-92]
Hashemabadi, M. A COMPARATIVE STUDY OF PANEL AND VORTEX LATTICE METHODS WITH FREE WAKE MODELING FOR AERODYNAMIC CALCULATIONS OF A HOVERING HELICOPTER ROTOR [Volume 24, 46.2, 2009, Pages 169-180]
Hashemi, M. Y. Study the effect of suction flow control on the aerodynamic performance of a wind turbine using 2D section numerical Results [37.3, Issue 1, 2021, Pages 79-89]
Hashemian, J. COLOR REMOVAL OF MOLASSE EFFLUENT BY WETLAND WITH FREE WATER SURFACE (FWS) [Volume 17, NO. 20, 2002, Pages 46-49]
Hashemian, S. J. OPERATION COMPARISON OF STATIC HEAD AND PUMP FEED OF WASTE WATER INTO THE UASB SYSTEM [Volume 18, Issue 21, 2002, Pages 59-63]
Hashemian, S. J. DESIGN AND CONSTRUCTION OF PREMANUFACTURED GAS SEPARATORS FOR THE WASTEWATER INDUSTRY [Volume 20, Issue 26, 2004, Pages 88-92]
Hashemian, S.J. SYNTHESIS AND STUDY OF MORPHOLOGY OF LEAD OXIDE- SULFATE COMPOUNDS (PbSO4.nPbO) AND INVESTIGATION OF THERMAL DECOMPOSITION OF LEAD SULFATE [Volume 21, Issue 29, 2005, Pages 57-62]
Hashemi Hosseini, Sh. COLLISION AND PENETRATION OF RIGID SPHERICAL-NOSE RODS IN INFINITE COMPRESSIBLE METAL BODIES [Volume 18, Issue 22, 2002, Pages 41-45]
Hasnzadegan, H. GENERATING A MAXIMUM MAP FOR ONE-STEP ROUGH FLAT-END MILLING [Volume 18, Issue 22, 2002, Pages 80-86]
Hassani, H. STABILITY ANALYSIS OF TUNNEL, PORTAL TRENCH AND UNSTABLE WEDGES OF THE TUNNEL IN THE SHENAGE 47+400 GHAZVIN -RASHT -ANZALI RAILROAD USING STEREONET AND COMPUTER SIMULATION [Volume 23, No. 39, 2007, Pages 31-39]
Hayatdavoodi, M. GEOMETRICAL OPTIMIZATION OF TLPUSING GENETIC ALGORITHM METHOD BASED ON MINIMIZING DOWN TIME UNDER REGULAR SEA WAVES [Volume 21, Issue 31, 2005, Pages 47-56]
Hazinia, F. Numerically and Experimentally Investigation of the Effect of Anisotropy and Stress Triaxiality on the Fracture Strain [Volume 39, Issue 1, 2023, Pages 27-34]
H. Dolabi, M. PREDICTION OF AERODYNAMIC COEFFICIENTS OF A SUPERSONIC WING USING BOUNDARY ELEMENT METHOD [29.3, Issue 1, 2013, Pages 87-92]
Hedayati, A. Numerical simulation of film pool boiling of ethanol-based nanofluids [Volume 40, Issue 2, 2024, Pages 25-37]
Hedayati-Azar, A. A review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
Hejranfar, K. A COMPARATIVE STUDY OF PANEL AND VORTEX LATTICE METHODS WITH FREE WAKE MODELING FOR AERODYNAMIC CALCULATIONS OF A HOVERING HELICOPTER ROTOR [Volume 24, 46.2, 2009, Pages 169-180]
Hejranfar, K. NUMERICAL SIMULATION OF INVISCID FLOW AROUND HOVERING HELICOPTER ROTO UNSING UPWIND SCHEME ON UNSTRUCTURED MESHES [Volume 23, 40.2, 2008, Pages 143-154]
Hekmatkhah, R. The Smart Design Of Heat Exchangers With Expanded Surfaces By Genetic Algorithm And Image Processing [Volume 39, Issue 2, 2023, Pages 25-35]
Hemmati, S.J. DETERMINATION OF HEATING CONDITONS IN PLATE FORMING PROCESS BY THE FLAME BENDING METHOD [Volume 21, Issue 29, 2005, Pages 13-21]
Hesami Naghshbandy, A. INVESTIGATION OF FAULT LOCATION EFFECT ON THE INTER-AREA OSCILLATIONS IN STRESSED POWER SYSTEMS USING MODAL SERIES METHOD [Volume 25, Issue 52, 2010, Pages 37-46]
Hesaraki, M. LIMIT CYCLES IN THE GAUSE PREDATOR-PREY SYSTEM WITH FUNCTIONAL RESPONSE [Volume 19, No. 25, 2003, Pages 3-12]
Hesaraki, M. ANALYSIS OF DISEASE TRANSMISSION MODEL IN AN OPEN ENVIRONMENT [Volume 21, No.30, 2005, Pages 3-6]
Heydari, M.M BED - DEPTH ESTIMATION IN ROTARY KILN USING INVERSE PROBLEM METHOD [Volume 23, No . 37, 2007, Pages 37-48]
H. Korayem, M. INVESTIGATION OF VIBRATION BEHAVIOR OF AFM PIEZOELECTRIC MICRO-BEAM IN LIQUID [29.3, Issue 2, 2013, Pages 87-96]
Hoseinzadeh Asl, M. SHAKING TABLE STUDY OF A CONFINED BRICK MASONRY BUILDING [Volume 24, Issue 44, 2008, Pages 21-27]
Hoshmand, M. ANALYTICAL SIMULATION OF A RAPID PROTOTYPING PROCESS IN A VIRTUAL ENVIRONMENT [Volume 20, Issue 28, 2004, Pages 86-91]
Hoshmand, M. EVALUATION OF FLEXIBLE MANUFACTURING SYSTEMS: USING NON-MONETARY GROUP DECISION MAKING [Volume 17, No . 19, 2001, Pages 70-80]
Hoshyarfard, M. A. PREPARATION OF NANOPOWDERS AND THEIR EFFECTS ON THE PROPERTIES AND MICROSTRUTCTURE OF ZNO VARISTORS [Volume 23, No. 39, 2007, Pages 41-46]
Hoshyari, B. WATER CRISIS ANALYSIS WITH A GLANCE AT THE ENVIRONMENTAL IMPACT ASSESSMENT AND WATERSHED MANAGEMENT IN IRAN [Volume 17, No . 19, 2001, Pages 22-32]
Hoshyari, B. Priorities of the Environment and Sustainable Development in Iran [Volume 14, No .15, 1999, Pages 10-18]
Hossein-Babaei, F. DETECTION OF COMBUSTIBLE GASES BY TIN OXIDE RESISTIVE GAS SENSOR FABRICATED BY ELECTRON BEAM EVAPORATION [Volume 23, No . 38, 2007, Pages 21-29]
Hosseini Galgo, S.M DETECTION OF COMBUSTIBLE GASES BY TIN OXIDE RESISTIVE GAS SENSOR FABRICATED BY ELECTRON BEAM EVAPORATION [Volume 23, No . 38, 2007, Pages 21-29]
Hoviat Talab, M. DEVELOPMENT OF 2D VIBRATION MEASURING SYSTEM USING IMAGE PROCESSING METHOD: AN INVESTIGATION ON FORCED VIBRATION OF HUMAN BODY IN VERTICAL DIRECTION [Volume 21, Issue 31, 2005, Pages 21-27]
Jabbari, M. THERMO-ELECTRO-MECHANICAL ANALYSIS OF CYLINDRICAL SHELL MADE OF FUNCTIONALLY GRADED PIEZOELECTRIC
MATERIALS USING ARBITRARY HIGHER-ORDER SHEAR DEFORMATION THEORY [34.3, Issue 1, 2018, Pages 125-135]
Jabbarzadeh, Milad A Novel Analytical-Statistical-Numerical Framework for Investigating the Thermo-Hydro-Mechanical Behavior of Heterogeneous Subsidence Phenomena, Moisture and Temperature Variations in Cracked Soils Under Soil-Atmosphere Interaction [Volume 41, Issue 1, 2025, Pages 13-28]
Jafari, M. Mtalhyzshbyhsazy and effective parameters of heavy oil Brtvlyd Kkhrn Trkdarll Gravitational loss method to help steam injection (SAGD) [Volume 20, Issue 28, 2004, Pages 54-60]
Jafarian, M. Approach of polymer gels and artificial muscles of Biomedical Engineering Dygah [Volume 9, Issue 4, 1992, Pages 49-54]
Jafarizadeh, M.A. WALKING STABILITY ON A SLOPE FOR A PLANAR 3-LINK BIPED ROBOT VIA ORBITAL STABILIZATION UPON A ZERO DYNAMIC MANIFOLD [30.3, 2.2, 2014, Pages 83-95]
Jafar Kazemi, F. EFFECT OF SURFACE PROXIMITY ON THE AERODYNAMIC PROPERTIES OF A SURFACE EFFECT CRAFT S AIRFOIL EFFECT CRAFT [Volume 18, Issue 21, 2002, Pages 9-17]
Jahangiriyan, A. A NEURAL NETWORK BASED ACCELERATION TECHNIQUE OF GENETIC ALGORITHM CONVERGENCE IN AERODYNAMIC DESIGN OPTIMIZATION [Volume 23, 40.2, 2008, Pages 101-107]
Johari Majd, V. GENERATING A MAXIMUM MAP FOR ONE-STEP ROUGH FLAT-END MILLING [Volume 18, Issue 22, 2002, Pages 80-86]
Jokar, M. Boundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 83-91]
Jonoud, S. SOME MICROBIAL OBSERVATION IN NITRIFICATION AND DENITRIFICATION PROCESS USING MOVING BED BIOFILM REACTOR (MBBR) [Volume 20, Issue 28, 2004, Pages 43-48]
Kakaie, A.H. DETERMINATION OF TEMPERATURE OF MOVING SURFACE BY SENSITIVITY ANALYSIS [Volume 18, Issue 21, 2002, Pages 18-24]
Kakaie, A.H. A THERMODYNAMIC MODEL TO STUDY THE ENERGY CONSUMPTION OF GAS COOKING OVENS [Volume 20, Issue 26, 2004, Pages 19-25]
K. Akbari, A. TWO-OBJECTIVE OPTIMIZATION OF HEAT RECOVERY AND DESALINATED WATER PRODUCTION FROM A ONCE-THROUGH COOLING SYSTEM [32.3, Issue 1, 2016, Pages 137-147]
Kalbasi, M. CATALYST SYNTHESIS, CONSTRUCTION AND MODELING OF FLUIDIZED BED REACTORS FOR OXIDIZING METHANOL TO
FORMALDEHYDE [Volume 24, No . 41, 2008, Pages 3-8]
Kalbasi, M. SIMULATION OF DETERGENT SPRAY DRYING [Volume 24, No . 41, 2008, Pages 41-47]
Kaloorazi, M. H. F. CONCEPTUAL DESIGN AND CONSTRUCTION OF AN UNMANNED HELICOPTER [30.3, 2.1, 2014, Pages 91-96]
Kamali, J. Nuclear fuel cycle technology (2) [Volume 10, No . 7, 1994, Pages 50-54]
Kamali, J. Nuclear fuel cycle technology (1) [Volume 9, No . 6, 1993, Pages 75-79]
Kamran, M. INFORMATION TECHNOLOGY AND FUTURE PROSPECTS [Volume 18, NO. Special ((IT)), 2002, Pages 3-7]
Kamran Masouleh, M. Processing Of Thin Magnesium Tubes By Tubular Channel Angular Pressing (TCAP) Process With Trapezoidal Geometry [Volume 39, Issue 2, 2023, Pages 75-82]
Karami, A. THE MANAGEMENT OF BIOTECHNOLOGY DEVELOPMENT [Volume 16, No . 16, 2000, Pages 17-22]
Karami, A. H. Experimental Investigation and Simulation of Controlled Size Droplet Formation in a Capillary Microdevice [Volume 40, Issue 2, 2024, Pages 76-84]
Karegarrazi, M. EFFICIENCY ASSESSMENT OF RESEARCH AND DEVELOPMENT DEPARTMENTS (R&D) OF A SELECTED NUMBER OF IRANIAN INDUSTRIAL CENTERS [Volume 15, No. 17, 1999, Pages 55-61]
Kargarnovin, M.H. APPLICATION OF MESHLESS GALERKING METHOD IN FORMULATING FRACTURE MECHANIC PROBLEMS [Volume 18, Issue 21, 2002, Pages 48-53]
Karimi, Maryam An Analytical Model for Determining the Effective Thermal Conductivity Coefficient in a Honeycomb Network with Heat Dissipation from the Central Cylindrical Axis [Volume 41, Issue 1, 2025, Pages 111-123]
Karimi, R. DESING AND FABRICATION OF "CEDRA" RESCUE ROBOT WITH ESPECIAL CAPABILITIES [Volume 21, Issue 31, 2005, Pages 29-37]
Karimi, S. Simulation of a Double Slope Solar Still with Rotating External Reflector [37.3, Issue 2, 2021, Pages 21-28]
Karimian Aliabadi, S. Study the effect of suction flow control on the aerodynamic performance of a wind turbine using 2D section numerical Results [37.3, Issue 1, 2021, Pages 79-89]
Karimian Aliabadi, S. Modeling of a wind energy harvesting INVELOX system by combination of numerical results and semi-analytical framework [38.3, Issue 2, 2022, Pages 37-46]
Karimian Aliabadi, S. Rotor Design And Performance Study Of An Airborne Wind Energy System With Flight Dynamics Simulator [Volume 39, Issue 2, 2023, Pages 45-56]
Karimian Aliabadi, S. A Comparative Study of the Aerodynamic Performance and Economic Viability of H-Shape and V-Shape Wind Turbines in the Climate of Zahedan City [Volume 40, Issue 1, 2024, Pages 111-118]
Karimian Aliabadi, Saeed Numerical Study of the Effect of the Co-Flow Jet on the Aerodynamic Coefficients of a Kilowatt Horizontal Axis Wind Turbine Blade [Volume 41, Issue 1, 2025, Pages 125-135]
Karimian Aliabadi, Saeed Numerical Study of the Effect of Flow Control Using Plasma Actuator on the Aerodynamic Performance of a VAWT [Volume 41, Issue 2, 2026, Pages 63-75]
Karimian Aliabadi, Saeed Numerical study of the effect of combining passive flow control methods to improve cyclone performance [(Articles in Press)]
Karimian Aliabadi, Saeed Numerical study of the effects of different erosion types over blade surface, on the aerodynamic characteristics of a wind turbine via 3D simulations [(Articles in Press)]
Karimirad, M. INVESTIGATION OF SCALE EFFECT CORRECTION FACTOR IN SHIP RESISTANCE MODEL TEST [Volume 23, 40.2, 2008, Pages 171-176]
Karimi Taheri, A. PREDICTION OF GRAIN GROWTH IN PURE ALUMINUM USING THE MONTE CARLO METHOD [Volume 20, Issue 28, 2004, Pages 29-37]
Karimi Taheri, A. DETERMINATION OF STRAIN FIELD AND LATERAL SPREAD IN FLAT ROLLING OF WIRE USING NUMERICAL ANALYSIS [Volume 23, No. 39, 2007, Pages 47-51]
Karimpour, H. GYROSCOPIC STABILITY ANALYSIS OF A ROLLING ROBOT [30.3, 2.2, 2014, Pages 105-112]
Karimzadeh, A. Dynamic behavior analysis of piezoelectric flow micro sensors and corresponding linear working domain [Volume 39, Issue 1, 2023, Pages 47-53]
Karmozdi, A. OPTIMAL THRUSTER CONFIGURATION FOR A GEOSTATIONARY SATELLITE [32.3, Issue 1, 2016, Pages 65-76]
Kasaei, Sh. PERFORMANCE ANALYSIS AND IMPROVEMENT OF MOTION ESTIMATION TECHNIQUES WITH APPLICATION TO VIDEO RESTORATION [Volume 19, No. 25, 2003, Pages 100-109]
Kashi, J. FRUCTOSE PRODUCTION FROM GLUCOSE BY ENZYMATIC METHOD [Volume 24, No . 41, 2008, Pages 29-32]
Katooli, M. H. PROPOSING AND ANALYSIS OF TWO COUPLED STIRLING ENGINES FOR HEAT-TO-COOL CONVERSION [35.3, Issue 2, 2019, Pages 99-105]
Kaveh, A. Neural networks are a powerful tool for analyzing structures Pralman (2) [Volume 11, Issue 11, 1996, Pages 97-78]
Kavehie, O. NOVEL DCVS REDUCTION ALGORITHM BASED ON A NEW LEVELS COUPLING RULE [Volume 23, No . 38, 2007, Pages 59-66]
Kayvani, J. In this structure, educational programs in higher education [Volume 15, No. 16, 1999, Pages 10-19]
Kayvani, J. Graduate Studies in the past and future (1) [Volume 13, No . 14, 1998, Pages 3-23]
Kazemeini, M. PREPARTIN AND EVALUATION OF THE NEEDED CATALYST FOR SULFUNATION PROCESS IN THE DETERGENT INDUSTRY [Volume 20, Issue 28, 2004, Pages 49-53]
Kazemi, M. T. SHAKING TABLE STUDY OF A CONFINED BRICK MASONRY BUILDING [Volume 24, Issue 44, 2008, Pages 21-27]
Kazemi, R. A NEW METHOD FOR MANEUVERABILITY IMPROVEMENT OF ARTICULATED HEAVY VEHICLES [31.3, Issue 1, 2016, Pages 41-53]
Kazemi, A. INVESTIGATION OF FAULT LOCATION EFFECT ON THE INTER-AREA OSCILLATIONS IN STRESSED POWER SYSTEMS USING MODAL SERIES METHOD [Volume 25, Issue 52, 2010, Pages 37-46]
Kazemi, M.T APPLICATION OF THE EXTENDED FINITH ELEMENT METHOD (X-FEM) IN COHESIVE CRACK MODELING [Volume 23, No . 37, 2007, Pages 21-27]
Kazeminjad, M. DETERMINATION OF STRAIN FIELD AND LATERAL SPREAD IN FLAT ROLLING OF WIRE USING NUMERICAL ANALYSIS [Volume 23, No. 39, 2007, Pages 47-51]
Kazemi Veisari, A. FRUCTOSE PRODUCTION FROM GLUCOSE BY ENZYMATIC METHOD [Volume 24, No . 41, 2008, Pages 29-32]
Kazemi Veisari, A. TURBIDITY REMOVAL IN PRODUCTION OF CLARIFIED POMEGRANATE JUICE WITH GOOD QUALITY [Volume 24, No . 41, 2008, Pages 49-52]
Kazemzadeh Hannani, S. A HIGH-RESOLUTION CENTRAL SCHEME FOR COMPOSITIONAL FLOW SIMULATIONS IN HYDROCARBON RESERVOI [27.3, Issue 2, 2011, Pages 37-46]
Kazmzadh Hanan, S. A THERMODYNAMIC MODEL TO STUDY THE ENERGY CONSUMPTION OF GAS COOKING OVENS [Volume 20, Issue 26, 2004, Pages 19-25]
Keimasi, M.R NUMERICAL SIMULATION OF A TURBULENT FILM COOLING FLOW USING STANDARD "K-3" AND "SHEAR STERESS TRANSPORT" MODELS [Volume 18, Issue 22, 2002, Pages 59-65]
Khajekoolaki, MohammadReza Design and Replacement of a Three-Stage Axial Compressor with a Centrifugal Compressor in a Gas Turbine to Enhance Performance [Volume 41, Issue 1, 2025, Pages 29-42]
Khaki Sedigh, A. COMBINING CONTEXT AND EMOTIONAL TEMPORAL DIFFERENCES LEARNING IN CONTROLS ENGINEERING [Volume 21, No.30, 2005, Pages 13-21]
Khatami, M. Flexibility and Geometric Optimization of a New Structure for a Polymer Stent with the Finite Element Method [Volume 40, Issue 1, 2024, Pages 15-23]
Khatib, A. DESIGN AND OPTIMIZATION OF A LAB SCALE THERMOACOUSTIC HEAT PUMP [30.3, Issue 1, 2014, Pages 41-53]
Khatibi, M.M. A NEW METHOD TO OBTAIN THE STABILITY REGION OF A HUMANOID ROBOT [27.3, Issue 1, 2011, Pages 83-88]
Khayat, M. EXPERIMENTAL STUDY OF THE EFFECT OF SURFACE TYPE ON THE POOL BOILING HEAT TRANSFER CHARACTERISTICS IN THE PRESENCE OF NANOFLUIDS WITH HYBRID BASE FLUID [36.3, Issue 2, 2020, Pages 83-95]
Khayat, M. Experimental study of the effect of oil-based nanofluid on heat transfer characteristics in different arrangements of wavy microchannels [Volume 40, Issue 1, 2024, Pages 85-96]
Khayat, M. Numerical simulation of film pool boiling of ethanol-based nanofluids [Volume 40, Issue 2, 2024, Pages 25-37]
Khayyat, M. DESIGN, FABRICATION AND CONTROL OF A RIGID-WING LAND YACHT MODEL [Volume 24, Issue 44, 2008, Pages 125-134]
Khodayari, M. S. A PREDICTIVE PATTERN FOR IRON AND STEEL PRODUCTION IN IRAN [Volume 17, No . 19, 2001, Pages 57-64]
Khoei, A.R APPLICATION OF THE EXTENDED FINITH ELEMENT METHOD (X-FEM) IN COHESIVE CRACK MODELING [Volume 23, No . 37, 2007, Pages 21-27]
Khomamizadeh, F. QUALITATIVE AND QUANTITATIVE STUDY OF MICROSTRUCTURAL CHARACTERISTICS OF A356 CAST ALLOY AND THE CORRELATED MECHANICAL PROPERTIES [Volume 20, Issue 28, 2004, Pages 38-42]
Khomamizadeh, F. STUDY OF COLD ROLLING DIRECTION ON DEVELOPMENT OF CUBIC TEXTURE IN GOSS Fe.Si SOFT MAGNETIC LAMINATIONS [Volume 21, No . 32, 2006, Pages 11-16]
Khomamizadeh, F. EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ91 ALLOY [Volume 21, No . 32, 2006, Pages 41-48]
Khorsand, H. EFFECT OF THERMAL CYCLING ON TRANSFORMATION TEMPERATURES IN 69/85wt%CU27/08wt%ZN2/29wt%A10/05TI MEMORY ALLOY [Volume 17, No . 19, 2001, Pages 44-49]
Khorshidi Malahmadi, J. CATALYST SYNTHESIS, CONSTRUCTION AND MODELING OF FLUIDIZED BED REACTORS FOR OXIDIZING METHANOL TO
FORMALDEHYDE [Volume 24, No . 41, 2008, Pages 3-8]
Khoshkhoee, Sh. EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ91 ALLOY [Volume 21, No . 32, 2006, Pages 41-48]
Khosravi, S. SURFACE REACTIONS IN ALUMINUM DUST COMBUSTION AND BURNING TIME [Volume 23, 40.2, 2008, Pages 87-91]
Khosravi Khezri, Mahdiyeh Investigation of the Microstructure and Microhardness of Inconel 792 Superalloy After Laser Shock Peening [Volume 41, Issue 1, 2025, Pages 99-110]
Khosravy El-hossaini, M. COSMPARING FULL AND REDUCED METHANE KINETIC MECHANISMS IN NUMERICAL MODELING OF POROUS BURNERS [Volume 23, 40.2, 2008, Pages 115-126]
Kianfar, F. INPUT-QUTPUT RELATIONS BETWEEN VARIOUS SECTORS OF THE ECONOMY [Volume 17, No . 19, 2001, Pages 65-69]
Kiani, M. Simultaneous Orbit, Attitude and Albedo Parameter Estimation Using Satellite Surface Temperature Data [37.3, Issue 2, 2021, Pages 47-55]
Kiyanfar, K. 36AN EFFECTIVE PART- PROCUREMENT MANAGEMENT SYSTEM FOR COMPANIES OF IRAN S MOTOR VEHICLE INDUSTRY [Volume 20, Issue 28, 2004, Pages 101-115]
K.Kamali, R. A CAE SIMULATION MODEL FOR THERMAL MODELING OF VEHICLE PASSENGER COMPARTMENT [Volume 21, Issue 29, 2005, Pages 7-12]
Kohi Kamali, R. A CAE SIMULATION MODEL FOR VEHICLE AIR CONDITIONING SYSTEM [Volume 20, Issue 26, 2004, Pages 43-50]
Kokabi, A. H. STUDY OF SOLIDIFICATION OF WELDING OF NICKEL BASE SUPER ALLOY (UDIMET 520) IN GTAW METHOD [Volume 20, Issue 28, 2004, Pages 22-28]
Kokabi, A.H. STUDY OF PWHT CRACKING OF NICKEL BASE SUPER ALLOY (UDIMET 520) IN GTAW METHOD [Volume 19, No. 24, 2003, Pages 7-14]
Maerefat, M. VENTILATION AND THERMAL PERFORMANCE IN A HYBRID SYSTEM OF HYDRONIC RADIANT COOLING AND STRATUM VENTILATION IN A RESIDENTIAL ROOM [31.3, Issue 2, 2015, Pages 113-124]
Maghdari, A. MOTION ANALYSIS OF A MANIPULATOR MOUNTED ON A VEHICLE WITH SUSPENSION SYSTEM [Volume 20, Issue 26, 2004, Pages 3-9]
Maghsodi, V. BIOTREATMENT OF WASTEWATER FROM DAIRY PROCESSING PLANTS [Volume 24, No . 41, 2008, Pages 53-58]
Maghsoodi, V. CANTALOUPE (SAMSORY) JUICE PRODUCTION AND SENSOTY EVALUATION OF THE JUICE [Volume 20, Issue 28, 2004, Pages 61-64]
Maghsoodlou, H. MEASUREMENT AND COMPARISON OF THE NET MOMENTS OF HUMAN JOINTS DURING WEIGHT LIFTING AT DIFFERENT SPEEDS [Volume 23, No . 37, 2007, Pages 81-88]
Maghsoudpour, A. Minimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]
Mahbadi, H. Stress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
Mahbobi, S.H. DESING AND FABRICATION OF "CEDRA" RESCUE ROBOT WITH ESPECIAL CAPABILITIES [Volume 21, Issue 31, 2005, Pages 29-37]
Mahboobi, S. H. DESIGN AND FABRICATION OF IONIC POLYMER-METAL COMPOSITES (IPMC) MICROGRIPPER: A FEASIBILITY STUDY [Volume 24, Issue 44, 2008, Pages 99-105]
Mahdavi, A. Design And Comparison Of Combined, Parabolic, And Flat Plate Reflectors On The Performance Of A Solar Module [Volume 39, Issue 2, 2023, Pages 13-24]
Mahdavi, M. STATISTICAL CORRELATION FUNCTIONS AND RECONSTRUCTION OF MICRO NANOCOMPOSITES; A REVIEW [34.3, Issue 2, 2018, Pages 31-40]
Mahdavi, M.T. THE LINK BETWEEN UNIVERSITY, INDUSTRY AND GOVERNMENT: AN IMPORTANT RELATIONS [Volume 15, No. 17, 1999, Pages 3-13]
Mahdavi, S.J. A NEW SCHEME FOR SPACE VECTOR MODULATION FOR THREE PHASE HARMONIC GENERATORS [Volume 19, No. 25, 2003, Pages 78-85]
Mahdavi Amiri, N. MULTIRESOLUTION OF SURFACES WITH ARBITRARY TOPOLOGIES USING A REVERSE DOO SUBDIVISION SCHEME [Volume 17, NO. 20, 2002, Pages 70-77]
Mahdavi Amiri, N. DESIGN AND ANALYSIS OF NEW ALGORITHMS FOR SOLVING CERTAIN SYSTEMS AND LINEAR PROGRAMS OVER REAL AND INTEGER SPACES [Volume 19, No. 25, 2003, Pages 13-20]
Mahdavi Amiri, N. National and Public Information [Volume 9, Issue 5, 1993, Pages 76-78]
Mahdi, M. Numerical Evaluation of Cavitation Erosion Intensity around NACA0015 Hydrofoil Based on Eulerian-Lagrangian Approach [38.3, Issue 2, 2022, Pages 21-28]
Mahdi, Miralam Numerical Investigating the Effect of the Nozzle on the Uniformity of the Refrigerant Distribution of the Evaporator Distributor [Volume 41, Issue 1, 2025, Pages 43-53]
Mahdian Dowlatabadi, M. A design algorithm and numerical investigation of a water-jacket cooling system for a high-altitude simulator diffuser [Volume 40, Issue 1, 2024, Pages 25-37]
Malekpour, M. STUDY OF COLD ROLLING DIRECTION ON DEVELOPMENT OF CUBIC TEXTURE IN GOSS Fe.Si SOFT MAGNETIC LAMINATIONS [Volume 21, No . 32, 2006, Pages 11-16]
Malekzadeh, R. Comparative research and development (R & D) in several countries [Volume 15, No. 16, 1999, Pages 25-32]
Malekzadeh, R. Position of Research in Medical Sciences [Volume 15, No. 16, 1999, Pages 53-60]
Mantegi, M. THE ROLE OF INDIGENOUS TECHNOLOGY DEVELOPING COOPERATION BETWEEN GOVERNMENT, UNIVERSITIES AND INDUSTRY [Volume 15, No. 17, 1999, Pages 28-34]
Masdari, M. EXPERIMENTAL INVESTIGATION OF UNSTEADY BOUNDARY LAYER OVER A SUPERCRITICAL AIRFOIL [32.3, Issue 2, 2016, Pages 41-52]
Masdari, M. Owl Aeroacoustics: Analysis of a Silent Flight [Volume 39, Issue 1, 2023, Pages 99-118]
Masdari, Mehran Novel Acoustic Absorbers Based on TPMS Structures: Implementation in Axial Fan Casings and Ducted Wind Turbines [(Articles in Press)]
Mashaghi, M. H. Proposing an empirical motion-time pattern for human gaze behavior in different social situations [Volume 40, Issue 1, 2024, Pages 3-13]
Mashayekhi, A.N Management roles in technology transfer [Volume 9, Issue 4, 1992, Pages 11-18]
Masoudi, Fatemeh Numerical Study of the Effect of the Co-Flow Jet on the Aerodynamic Coefficients of a Kilowatt Horizontal Axis Wind Turbine Blade [Volume 41, Issue 1, 2025, Pages 125-135]
Masouleh, M. T. CONCEPTUAL DESIGN AND CONSTRUCTION OF AN UNMANNED HELICOPTER [30.3, 2.1, 2014, Pages 91-96]
Meghdari, A. KNEE MUSCULAR AND JOINT FORCES WHILST RISING FROM A DEEP SQUAT [Volume 18, Issue 22, 2002, Pages 66-72]
Meghdari, A. DESING AND FABRICATION OF "CEDRA" RESCUE ROBOT WITH ESPECIAL CAPABILITIES [Volume 21, Issue 31, 2005, Pages 29-37]
Meghdari, A. Approach of polymer gels and artificial muscles of Biomedical Engineering Dygah [Volume 9, Issue 4, 1992, Pages 49-54]
Meghdari, A. Recognizing Acceptance Level in Facial Expressions by Neural Network [37.3, Issue 2, 2021, Pages 13-20]
Meghdari, Ali ANALYTICALLY SOLUTION OF MASS EQUATIONS, NONLINEAR SPRINGS WITH EFFECTIVE WIND FORCE UNDER DYNAMICAL LOAD [Volume 21, Issue 29, 2005, Pages 3-6]
Meghdari, Ali MOTION PLANNING AND SIMULATION OF A CREEPING ROBOT ON SLOPE [Volume 21, Issue 29, 2005, Pages 23-29]
Mehrabyan, M.A. PREDICTION OF GLOBAL SOLAR RADIATION IN KERMAN USING GEOMETRICAL, ASTRONOMICAL, GEOGRAPHICAL AND
METEOROLOGICAL PARAMETERS [Volume 25, 51.2, 2010, Pages 3-13]
Mehrad, J. Outline the importance of information and policy information [Volume 12, No . 13, 1996, Pages 36-41]
Mehrad, J. Science and technology policy - the planning and implementation [Volume 10, No . 8, 1995, Pages 67-73]
Mehralizadeh, Y. GLOBALIZATION: IMPLICATIONS FOR EDUCATIONAL PLANNING IN INSTITUTIONS OF HIGHER EDUCATION IN IRAN [Volume 18, NO. Special ((IT)), 2002, Pages 67-74]
Mehri, B. NUMERICAL SOLUTION OF LINEAR AND NON-LINER POISSON S EQUATION [Volume 17, NO. 20, 2002, Pages 62-69]
Mehri, B. ANALYTICALLY SOLUTION OF MASS EQUATIONS, NONLINEAR SPRINGS WITH EFFECTIVE WIND FORCE UNDER DYNAMICAL LOAD [Volume 21, Issue 29, 2005, Pages 3-6]
Mehri, B. HYPERGONIOMETRIC FUNCTIONS AND THEIR APPLICATIONS [Volume 21, No.30, 2005, Pages 7-11]
Mehrjo, H. EXPERIMENTAL DETERMINATION OF LIQUID ENGINES COMBUSTION CHAMBER ACOUSTIC CHARACTERISTICS [Volume 23, No . 37, 2007, Pages 89-97]
Meibodi, M.R. CELLULAR LEARNING AUTOMATA AND ITS APPLICATIONS [Volume 19, No. 25, 2003, Pages 54-77]
Menhaj, M.B. NONLINEAR ADAPTIVE FLIGHT CONTROL USING BACKSTEPPING AND NEURAL NETWORKS [Volume 23, No . 38, 2007, Pages 51-58]
Meqhdari, A. Review and compare the costs of education in engineering disciplines in some universities outside Iran [Volume 13, No . 14, 1998, Pages 24-28]
M. Hoseyni, A. RUDDER INFLUENCE MODELING IN NUMERICAL SIMULATION OF HIGH SPEED CRAFT [31.3, Issue 1, 2016, Pages 3-13]
Milani, F. Familiarity with the software "Mathematica" [Volume 9, Issue 5, 1993, Pages 81-84]
MirBagheri, A.R. DEVELOPMENT OF 2D VIBRATION MEASURING SYSTEM USING IMAGE PROCESSING METHOD: AN INVESTIGATION ON FORCED VIBRATION OF HUMAN BODY IN VERTICAL DIRECTION [Volume 21, Issue 31, 2005, Pages 21-27]
Mir Hosseini, S.H ASSESSMENT OF THE INDIRECT RAPID TOOLING METHODS USING ANALYTIC HIERARCHY PROCESS (AHP) [Volume 23, No. 39, 2007, Pages 75-85]
Mirian Hussein Abadi, H. AN ENVIRONMENT FOR PROGRAM DEVELOPMENT FORM FORMAL SPECIFICATIONS [Volume 19, No. 25, 2003, Pages 42-53]
Mirjalili, M.R. Numerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
Mirlatifi, M. STUDY OF WIND EFFECTS ON FREE WATER SURFACE EVAPORATION FROM CHAHNIMEH RESERVOIR IN SISTAN, USING THE DALTONIAN METHOD [Volume 23, No . 37, 2007, Pages 13-20]
Mirzaei, F. EFFECT OF RANDOM LOADING ON FATIGUE LIFE OF A STRUCTURAL STEEL [Volume 21, No . 32, 2006, Pages 31-40]
Mirzaie Saba, A. DESIGN AND MANUFACTURING OF A GAIT REHABILITATION ROBOT WITH COOPERATIVE CONTROL FUNCTIONALITY [30.3, 2.1, 2014, Pages 117-126]
Mirzakhani, A. Investigation of Texture Intensity Effect on Deformation Behavior of Extruded Mg-0.8wt%Y Alloy under Tensile and Compressive Loading Using the Crystalline Plasticity Finite Element Method [37.3, Issue 1, 2021, Pages 59-69]
Mirzakhani, A. Investigating the effect of Texture Intensity on the Forming Limit Diagram of Magnesium Microtubes used in Stents using Crystal Plasticity Finite Element Modeling [Volume 40, Issue 2, 2024, Pages 15-24]
M. Moghaddam, M. DESIGN AND MANUFACTURING OF A GAIT REHABILITATION ROBOT WITH COOPERATIVE CONTROL FUNCTIONALITY [30.3, 2.1, 2014, Pages 117-126]
M.Moghaddam, M. SISTEM IDENTIFICATION IN (H∞) [Volume 20, Issue 26, 2004, Pages 51-57]
M. Naeini, H. NUMERICAL AND EXPERIMENTAL STUDY OF EFFECTIVE PARAMETERS ON THE LOAD AND FORMING TORQUE OF ROLLS IN THE COLD ROLL FORMING OF SYMMETRIC CHANNEL SECTION [32.3, Issue 2, 2016, Pages 91-97]
Moattar Hosseini, S. M. Overview "of communication, industry and government" and offered a suggestion to improve this relationship [Volume 12, No . 13, 1996, Pages 3-8]
MoazamiGoudarzi, M. Effect of vibration amplitude and temperature on the shape and size of aluminum powder produced by ultrasonic atomizer process [Volume 39, Issue 1, 2023, Pages 25-45]
Modarres Yazdi, M. RANKING THE INTER-BASIN WATER TRANSFERS USING INDUCED ORDERED WEIGHTED AVERAGING OPERATOR [Volume 23, No . 37, 2007, Pages 99-109]
Moeni shad, M. Oxygenated compounds and gaseous fuels used in vehicles to be used as energy sources in transportation sector [Volume 10, No . 7, 1994, Pages 28-32]
Mofareh, A. PATTERN OF THEAFLAVIN CHANGES IN IRANIAN BLACK TEA-EVALUATION OF THE CTC AND CONVENTIONAL PROCESS IN THE ROLLING OF GREEN TEA LEAVES [Volume 21, No . 32, 2006, Pages 49-56]
Mofid, M. DYNAMIC NON-LINEAR ANALYSIS OF CONCRETE STRUCTURES WITH STEEL BRACING [Volume 17, No . 19, 2001, Pages 33-43]
Moghadac, S. M. ANALYSIS OF DISEASE TRANSMISSION MODEL IN AN OPEN ENVIRONMENT [Volume 21, No.30, 2005, Pages 3-6]
Moghadas, S.M. LIMIT CYCLES IN THE GAUSE PREDATOR-PREY SYSTEM WITH FUNCTIONAL RESPONSE [Volume 19, No. 25, 2003, Pages 3-12]
Moghadaszadeh, Arman Numerical study of the effect of combining passive flow control methods to improve cyclone performance [(Articles in Press)]
Moghani, J.S. A NEW APPROACH IN MODELING DYNAMIC EFFECTS OF MAGNETIC FIELD IN FERROMAGNETIC MATERIALS, USING FINITE ELEMENT METHOD [Volume 23, No . 38, 2007, Pages 43-50]
Mohammadi, M. SIMULATION OF DETERGENT SPRAY DRYING [Volume 24, No . 41, 2008, Pages 41-47]
Mohammadi, S. Intelligent Fault Detection of Rolling Element Bearing under Variable Operating Conditions by Convolutional Neural Network using Time and Frequency Domain Signals [Volume 40, Issue 2, 2024, Pages 38-51]
Mohammadian Semnani, H. R. THE STUDY OF PRECIPITATION HANDENING OF AN ALUMINIUM - SiCp COMPOSITE [Volume 19, No. 24, 2003, Pages 3-6]
Mohanunadi, S. M. NUMERICAL SIMULATION OF INVISCID FLOW AROUND HOVERING HELICOPTER ROTO UNSING UPWIND SCHEME ON UNSTRUCTURED MESHES [Volume 23, 40.2, 2008, Pages 143-154]
Mohseni, H. MATHEMATICAL MODELING OF Co2 SOLUBILITY IN MIXTURE OF AMINS SOLVENT [Volume 24, No . 41, 2008, Pages 33-39]
Mojaddam, M. OPTIMUM DESIGN, FABRICATION, AND TEST OF A RADIAL FLOW COMPRESSOR VOLUTE [33.3, Issue 1, 2017, Pages 17-28]
Mojahedi, M. STATIC INSTABILITY ANALYSIS OF A NONLINEAR MICROSWITCH CONSIDERING MODIFIED COUPLE STRESS THEORY [34.3, Issue 2, 2018, Pages 53-61]
Mojahedi, M. Investigating of size-dependent buckling and instability caused by support forces and electrostatic field in porous annular microplates [Volume 40, Issue 1, 2024, Pages 75-84]
Mojahedi, Mahdi Investigating of size-dependent buckling and instability caused by support forces and electrostatic field in porous annular microplates [Volume 40, Issue 1, 2024, Pages 75-84]
Mojarad, M. Approach of polymer gels and artificial muscles of Biomedical Engineering Dygah [Volume 9, Issue 4, 1992, Pages 49-54]
Mojaver, Parisa Performance and Emission Analysis of an Energy System Based on a Thermochemical Process and a Proton-Conducting Electrolyte Fuel Cell [Volume 41, Issue 2, 2026, Pages 127-135]
Mojaver, Parisa Thermodynamic Modeling and Performance Assessment of a Clean Hydrogen Production Energy System Using a Palladium Separation Membrane Based on Gibbs Free Energy Minimization and Lagrange Undetermined Multipliers Method [(Articles in Press)]
Mojibi, M. Reliability-Based Multidisciplinary Design Optimization Under Uncertainty for Reusable Flexible Space Launcher utilizing NSGA-II [Volume 40, Issue 1, 2024, Pages 61-74]
Mojtahedi, M.M. Effect of vibration amplitude and temperature on the shape and size of aluminum powder produced by ultrasonic atomizer process [Volume 39, Issue 1, 2023, Pages 25-45]
Mokhtari, Sh. OPTIMIZATION OF OXIDATIVE COUPLING OF METHANE OVER PEROVSKITE CATALYST AND OCM KINETICS MODELING BY GENETIC ALGORITH [Volume 25, No . 50, 2009, Pages 15-24]
Mokhtarzadeh Salmasi, H. MEASUREMENT AND COMPARISON OF THE NET MOMENTS OF HUMAN JOINTS DURING WEIGHT LIFTING AT DIFFERENT SPEEDS [Volume 23, No . 37, 2007, Pages 81-88]
Mokri, A. Comparative research and development (R & D) in several countries [Volume 15, No. 16, 1999, Pages 25-32]
Mokri, A. Position of Research in Medical Sciences [Volume 15, No. 16, 1999, Pages 53-60]
Moosavian, M.A. COMPARISON AND SUGGESTION OF BEST EOS'S TO PREDICT PHYSICAL PROPERTIES IN WAX/CATALYST SEPARATION BY
SUPERCTITICAL HEXANE [Volume 24, No . 41, 2008, Pages 21-28]
Moradi, F. Experimental study of the effect of oil-based nanofluid on heat transfer characteristics in different arrangements of wavy microchannels [Volume 40, Issue 1, 2024, Pages 85-96]
Moradi, H. Boundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 57-63]
Moradi, M. A NEW METHOD TO OBTAIN THE STABILITY REGION OF A HUMANOID ROBOT [27.3, Issue 1, 2011, Pages 83-88]
Moradi, M.R EXPERIMENTAL STUDY OF SWIRL SPRAY PATTERN [Volume 21, Issue 29, 2005, Pages 37-46]
Morovat, N. VENTILATION AND THERMAL PERFORMANCE IN A HYBRID SYSTEM OF HYDRONIC RADIANT COOLING AND STRATUM VENTILATION IN A RESIDENTIAL ROOM [31.3, Issue 2, 2015, Pages 113-124]
Mortazavi, A. A NUMERICAL ANALYSIS OF THE ROLE OF IMPORTANT PARAMETERS IN THE GROUTING PROCESS IN DISCONTINUOUS ROCK MASSES [Volume 23, No. 39, 2007, Pages 93-100]
Mortazavi, A. NUMERICAL ANALYSIS OF BLAST - INDUCED WAVE PROPAGATION IN ROCK MASSES CONTAINING BEDDING PLANES [Volume 21, No . 32, 2006, Pages 57-64]
Mostafavi, Alireza Edge-Computing-Based Anomaly Detection of Rotating Machines Using Artificial Neural Networks [Volume 41, Issue 2, 2026, Pages 33-47]
Mostafavi, M. THE LINK BETWEEN GOVERNMENT, UNIVERSITY AND INDUSTRY: A ASE STUDY BY SHIRAZ UNIVERSITY [Volume 15, No. 17, 1999, Pages 41-50]
Mostafavi, M. The importance of research and development - industrial cooperation through joint university, industry and government experience of the World [Volume 12, No . 13, 1996, Pages 13-17]
Moulavi kakhaki, M. A NEW APPROACH FOR CALCULATION OF PROJECTED RANGE DISTRIBUTIONS OF IMPLANTED IONS IN SEMICONDUCTORS [Volume 21, No.30, 2005, Pages 65-75]
Mousavi, M.V. SIMULATION OF EXPANSION AND FRAGMENTATION OF A CYLINDRICAL SHELL SUBJECTED TO INTERNAL DETONATION BY
THE SMOOTHED PARTICLE HYDRODYNAMICS METHOD [32.3, Issue 1, 2016, Pages 29-39]
Mousavi-Akbarzadeh, H. EXACT SOLUTION FOR NONAXISYMMETRIC ACOUSTIC RADIATION FROM A SUBMERGED HOLLOW SPHERE [30.3, Issue 1, 2014, Pages 99-106]
Mousavian, M.A. VOLUME FLOW RATE AND BED DEPTH EFFECTS OF CARBON ACTIVE RESIN IN BENZOIC ACID ADSORPTION [Volume 25, No . 50, 2009, Pages 35-39]
Mousavi-Naeinian, M. THERMOECONOMICAL OPTIMIZATION AND EXERGY ANALYSIS OF A VAPOR COMPRESSION REFRIGERATION CYCLE [Volume 24, 46.2, 2009, Pages 157-162]
Mousavi Rad, S. M. AERODYNAMIC PERFOPRMANCE OF A WING MOVING CLOSE TO WATER SURFACE [Volume 20, Issue 26, 2004, Pages 34-42]
Movaghar Rahimabad, A. SHARIFSAN AND ITS FEATURES PERFORMANCE EVALUATION OF COMPUTER SYSTEMS [Volume 19, No. 25, 2003, Pages 29-41]
Movahedi, A. EXPERIMENTAL INVESTIGATION OF TURBULENT FLOW AROUND A 3D SQUARE CYLINDER WITH WALL EFFECT [30.3, Issue 1, 2014, Pages 65-77]
Movahedi, M. THE EFFECT OF MOLD VIBRATION ON THE MICROSTRUCTURE ON THE MICROSTRUCTURE OF AL7075 THIXOFORMING BILLET PRODUCED BY THE COOLING SLOPE TECHNIQUE [Volume 23, No. 39, 2007, Pages 53-59]
Movahedian, H. PERFORMANCE COMPARISON OF HORIZONTAL- FLOW ANAEROBIC IMMOBILIZED SLUDGE (HAIS) AND UASB REACTORS USING A SYNTHETIC SUBSTRATE [Volume 21, Issue 29, 2005, Pages 63-70]
Mozafari, M. Owl Aeroacoustics: Analysis of a Silent Flight [Volume 39, Issue 1, 2023, Pages 99-118]
Naderan Tahan, K. APPLICATION OF RETURN MAPPING ALGORITHM IN ANALYSIS OF PRESSURE VESSELS WITH NONLINEAR KINEMATIC HARDENING BEHAVIOR [Volume 25, 51.2, 2010, Pages 43-48]
Naderi Shahi, S. PERFORMANCE COMPARISON FOR SPECTRAL-BASED DOA ESTIMATION ALGORITHMS AND PROPOSAL OF A HIGH-RESOLUTION AND LOW COMPUTATIONAL COST ALGORITHM [Volume 25, Issue 52, 2010, Pages 63-69]
Naeli, M.A. GLOBALIZATION: IMPLICATIONS FOR EDUCATIONAL PLANNING IN INSTITUTIONS OF HIGHER EDUCATION IN IRAN [Volume 18, NO. Special ((IT)), 2002, Pages 67-74]
Nagd Abadi, R. A COROTATIONAL CONSTITUTIVE MODEL FOR LARGE PLASTIC DEFORMATION ANALYSIS OF HARDENING MATERIALS [Volume 18, Issue 21, 2002, Pages 3-8]
Naghdabadi, R. DETERMINATION OF SUBSEQUENT YIELD SURFACES USING A COROTATIONAL CONSECUTIVE MODEL FOR RIGID PLASTIC HARDENING MATERIALS [Volume 18, Issue 22, 2002, Pages 3-9]
Naghdabadi, R. DETERMINATION OF HEATING CONDITONS IN PLATE FORMING PROCESS BY THE FLAME BENDING METHOD [Volume 21, Issue 29, 2005, Pages 13-21]
Nangir, A. EFFECT OF THERMAL CYCLING ON TRANSFORMATION TEMPERATURES IN 69/85wt%CU27/08wt%ZN2/29wt%A10/05TI MEMORY ALLOY [Volume 17, No . 19, 2001, Pages 44-49]
Narimani, R. KNEE MUSCULAR AND JOINT FORCES WHILST RISING FROM A DEEP SQUAT [Volume 18, Issue 22, 2002, Pages 66-72]
Narimani, R. MEASUREMENT AND COMPARISON OF THE NET MOMENTS OF HUMAN JOINTS DURING WEIGHT LIFTING AT DIFFERENT SPEEDS [Volume 23, No . 37, 2007, Pages 81-88]
Narimani, R. DEVELOPMENT OF 2D VIBRATION MEASURING SYSTEM USING IMAGE PROCESSING METHOD: AN INVESTIGATION ON FORCED VIBRATION OF HUMAN BODY IN VERTICAL DIRECTION [Volume 21, Issue 31, 2005, Pages 21-27]
Nasehi, A. PROJECT REALIZATION PROCESS [Volume 20, Issue 28, 2004, Pages 79-85]
Nasernezhad, B. PATTERN OF THEAFLAVIN CHANGES IN IRANIAN BLACK TEA-EVALUATION OF THE CTC AND CONVENTIONAL PROCESS IN THE ROLLING OF GREEN TEA LEAVES [Volume 21, No . 32, 2006, Pages 49-56]
Nasihati Gourabi, F. Simultaneous Orbit, Attitude and Albedo Parameter Estimation Using Satellite Surface Temperature Data [37.3, Issue 2, 2021, Pages 47-55]
Nasir, A. STRESS FIELD NEAR THE EDGES OF SYMMETRIC BALANCED COMPOSITE LAMINATES [Volume 20, Issue 26, 2004, Pages 10-18]
Nasirahmdi, A. POTENTIAL APPLICATION OF ENZYMES IN WASTE TREATMENT [Volume 16, No . 16, 2000, Pages 62-75]
Nasiri, M. Hardware-in-the-loop simulation of a gas turbine engine fuel control unit using model-based predictor [38.3, Issue 1, 2022, Pages 3-12]
Nassirharand, A. DEVELOPMENT OF A NEW METHOD FOR DESIGN OF ADAPTIVE LEAD-LAG CONTROLLERS [Volume 23, 40.2, 2008, Pages 137-142]
Nassiri Kenari, M. MULTIUSER DETECATION OF DS/CDMA SIGNALS IN MULTIPATH FADING CHANNELS [Volume 19, No. 25, 2003, Pages 86-92]
Nassiri Toosi, A. Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
Navaei -Alvar, H. PREPARATION OF NANOPOWDERS AND THEIR EFFECTS ON THE PROPERTIES AND MICROSTRUTCTURE OF ZNO VARISTORS [Volume 23, No. 39, 2007, Pages 41-46]
Navi, k. NOVEL DCVS REDUCTION ALGORITHM BASED ON A NEW LEVELS COUPLING RULE [Volume 23, No . 38, 2007, Pages 59-66]
Nayebi, A. APPLICATION OF RETURN MAPPING ALGORITHM IN ANALYSIS OF PRESSURE VESSELS WITH NONLINEAR KINEMATIC HARDENING BEHAVIOR [Volume 25, 51.2, 2010, Pages 43-48]
Nejat Pishkenari, Hossein Attitude Determination of Geosynchronous Satellites with Sun and Earth Sensors Using Artificial Intelligence Algorithms [(Articles in Press)]
Nejat Pishkenari, H. Boundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 57-63]
Nejat Pishkenari, H. Boundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 83-91]
Nejat Pishkenari, H. Nanocars assembly on a surface: coarse-grained molecular dynamics study [Volume 40, Issue 1, 2024, Pages 39-46]
Nemati, Z. MATERIALS - PROPERTIES RELATIONSSHIP IN CERAMIC VARIOSTORS [Volume 19, No. 24, 2003, Pages 15-21]
Nemati, Z. A. PREPARATION OF NANOPOWDERS AND THEIR EFFECTS ON THE PROPERTIES AND MICROSTRUTCTURE OF ZNO VARISTORS [Volume 23, No. 39, 2007, Pages 41-46]
Nematzadeh, F. STUDY OF PWHT CRACKING OF NICKEL BASE SUPER ALLOY (UDIMET 520) IN GTAW METHOD [Volume 19, No. 24, 2003, Pages 7-14]
Nematzadeh, F. STUDY OF SOLIDIFICATION OF WELDING OF NICKEL BASE SUPER ALLOY (UDIMET 520) IN GTAW METHOD [Volume 20, Issue 28, 2004, Pages 22-28]
Nematzadeh, F. Numerical evaluation of the mechanical performance of intelligent alloy stents under axial loading for application in peripheral artery [38.3, Issue 1, 2022, Pages 13-21]
Nematzadeh, M.R. Technology transfer and its relation to training and professional development [Volume 8, Issue 3, 1992, Pages 9-11]
Niary, A. M. CONCEPTUAL DESIGN AND CONSTRUCTION OF AN UNMANNED HELICOPTER [30.3, 2.1, 2014, Pages 91-96]
Nikoubin, T. NOVEL DCVS REDUCTION ALGORITHM BASED ON A NEW LEVELS COUPLING RULE [Volume 23, No . 38, 2007, Pages 59-66]
Nikpour, R. Stress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
Niyamanesh, H. THE EFFECT OF MOLD VIBRATION ON THE MICROSTRUCTURE ON THE MICROSTRUCTURE OF AL7075 THIXOFORMING BILLET PRODUCED BY THE COOLING SLOPE TECHNIQUE [Volume 23, No. 39, 2007, Pages 53-59]
Nobahari, H. INVESTIGATION OF ACCURACY OF INTEGRATED INERTIAL-RADAR NAVIGATION SYSTEMS IN AUTOLANDING OF UNMANNED
AIR VEHICLES [32.3, Issue 2, 2016, Pages 53-62]
Nobakhti, M.H. Experimental study of the effect of oil-based nanofluid on heat transfer characteristics in different arrangements of wavy microchannels [Volume 40, Issue 1, 2024, Pages 85-96]
Nobakhti, M.H. Numerical simulation of film pool boiling of ethanol-based nanofluids [Volume 40, Issue 2, 2024, Pages 25-37]
Nojoumi, Amirali Experimental Investigation of the Effect of Pre-evacuation on the Starting Performance of a Vacuum Simulator Diffuser with Conical Nozzles of Different Expansion Ratios [Volume 41, Issue 2, 2026, Pages 3-16]
Noorani, M.H. RETRIEVAL INFORMATION FROM PROJECT CONTROL ENVIRONMENTS [Volume 20, Issue 28, 2004, Pages 65-69]
Nourani, A. Comparison of experimental results between using auxetic shoe, conventional shoe and barefoot on the kinematics of vertebral column during drop vertical jump [Volume 39, Issue 1, 2023, Pages 89-98]
Nouri Delavar, A. THE USE OF ELECTROCHEMICAL NOISE SCC MONITORING OF S.S 304 AND BRASS ALLOYS [Volume 23, No. 39, 2007, Pages 25-30]
Omidvar, B. CRACK INTERACTION AFFECTED BY LONGITUDINAL WAVES [Volume 23, No . 37, 2007, Pages 29-35]
OmmatMohammadi, M. Mohammad-Reza Dynamic Modeling of the Limb and the Passive Vibration Absorber System With the Aim of Suppressing the Rest Tremor of The Hand [Volume 41, Issue 1, 2025, Pages 83-98]
Ommi, F. MODEL DEVELOPMENT FOR STARTUP AND DAMPING OF A STANDING WAVE THERMO-ACOUSTIC ENGINE [38.3, Issue 1, 2022, Pages 113-125]
Orafa, A. H. A nonlinear model for vibro-acoustic analysis of a submerged axially moving cylindrical shell [Volume 40, Issue 2, 2024, Pages 85-96]
Oveysi, M. Experimental Investigation and Simulation of Controlled Size Droplet Formation in a Capillary Microdevice [Volume 40, Issue 2, 2024, Pages 76-84]
Pahlavanzadeh, H. ANALYSIS OF EFFECTIVE PARAMETERS ON A ROTARY DESICCANT WHEEL PERFORMANCE [Volume 23, 40.2, 2008, Pages 155-162]
Pahlavanzadeh, H. DETERMINATION OF SORPTION ISOTHERM CURVES AND HEAT OF ISOSTRIC FOR WHEAT FLOUR [Volume 24, No . 41, 2008, Pages 13-19]
Pahlavanzadeh, H. MATHEMATICAL MODELING OF Co2 SOLUBILITY IN MIXTURE OF AMINS SOLVENT [Volume 24, No . 41, 2008, Pages 33-39]
Pahlevanzade, Mahsa Optimal Vibration Control of Bladeless Wind Power Generators [Volume 41, Issue 2, 2026, Pages 137-150]
Pakravan, Hossein Ali Investigating the Effectiveness of the Population Balance Model for Predicting Thermal Transfer Characteristics of Ice Slurry Flow within a Pipe [Volume 41, Issue 2, 2026, Pages 93-105]
Panahizadeh, V. NUMERICAL AND EXPERIMENTAL STUDY OF EFFECTIVE PARAMETERS ON THE LOAD AND FORMING TORQUE OF ROLLS IN THE COLD ROLL FORMING OF SYMMETRIC CHANNEL SECTION [32.3, Issue 2, 2016, Pages 91-97]
Pashaei, M. H. THREE-DIMENSIONAL FLUTTER AND NONLINEAR DYNAMICAL BEHAVIOR ANALYSIS OF FLUID CONVEYING PIPES [32.3, Issue 2, 2016, Pages 3-11]
Pashmforoosh, R. INVESTIGATION OF THE PROPER WAY TO FACILITATE LONG-TERM RETENTION OF VOCABULARY: COMPUTER-ASSISTED,
MOBILE-BASED, OR DICTIONARY INVOLVEMENT LEARNING [33.3, Issue 1, 2017, Pages 55-61]
Passandideh-Fard, M. NUMERICAL AND EXPERIMENTAL INVESTIGATION OF THE MOTION OF A DEFORMABLE SOLID BODY AND ITS IMPACT ON A RIGID SUBSTRATE [31.3, Issue 2, 2015, Pages 15-23]
Payandeh, A. SOURCE CODED MODULATION FOR DISCRETE SOURCES WITH MEMORY [Volume 25, Issue 52, 2010, Pages 31-36]
Payandeh, A. IMPROVING THE EFFICIENCY OF DATA TRANSMIT SYSTEM FOR LEO REMOTE SENSING SATELLITES BASED ON TRANSMISSION RATE AND POWER CONTROL [Volume 21, No.30, 2005, Pages 31-40]
Pazoki, M. EXPERIMENTAL STUDY ON FORCE CONVECTION OF A NANOFLUID IN A SPIRAL TUBE [31.3, Issue 2, 2015, Pages 59-66]
Pazouki, M. POTENTIAL APPLICATION OF ENZYMES IN WASTE TREATMENT [Volume 16, No . 16, 2000, Pages 62-75]
Pazouki, M. Experimental investigation and analysis of combustion properties and chemical-physical properties of nano-fuel using hybrid nanostructure additives [Volume 39, Issue 1, 2023, Pages 55-67]
Pazouki, M. Simulation And Theoretical Analysis Of The Nanofluid-Based Oil Transformers For Improving The Cooling Performance Of The Transformer [Volume 39, Issue 2, 2023, Pages 93-106]
Pazouki, M. R. Experimental investigation and analysis of combustion properties and chemical-physical properties of nano-fuel using hybrid nanostructure additives [Volume 39, Issue 1, 2023, Pages 55-67]
Pazouki, M. R. Simulation And Theoretical Analysis Of The Nanofluid-Based Oil Transformers For Improving The Cooling Performance Of The Transformer [Volume 39, Issue 2, 2023, Pages 93-106]
Poormomeni firoozabadi, Mahnaz Numerical Simulation Of Energy Harvesting From A Flexible Plate Behind A Cylinder Using Flow-Induced Vibrations [Volume 39, Issue 2, 2023, Pages 65-74]
Pourtakdoust, S.H. Simultaneous Orbit, Attitude and Albedo Parameter Estimation Using Satellite Surface Temperature Data [37.3, Issue 2, 2021, Pages 47-55]
Prniani, M. ANALYSIS OF THYRISTOR CONTROLLED SERIES COMPENSATION (TCSC) BEHAVIOR AT SUBSYNCHRONOUS FREQUENCIES AND ITS IMPACT ON DAMPING SUBSYNCHRONOUS RESONANCE (SSR) [Volume 19, No. 25, 2003, Pages 93-99]
Q
Qadimi, H. The importance of information technology in construction [Volume 14, No .15, 1999, Pages 61-65]
Qanati, P. OPTIMAL SHAPE FOR THE UNSYMMETRIC BONDED COMPOSITE REPAIR PATCH [Volume 21, Issue 31, 2005, Pages 57-63]
Qanbar, A. Research in knowledge management with an overview of the experiences of other countries [Volume 11, Issue 11, 1996, Pages 18-29]
Qanbarpur, H. Mechanical and electrical sensitivity of a capacitive micro ultrasonic transducer considering scale effects [38.3, Issue 2, 2022, Pages 29-36]
R
Rad, M. DESIGN, FABRICATION AND CONTROL OF A RIGID-WING LAND YACHT MODEL [Volume 24, Issue 44, 2008, Pages 125-134]
Rad, M. EFFECT OF SURFACE PROXIMITY ON THE AERODYNAMIC PROPERTIES OF A SURFACE EFFECT CRAFT S AIRFOIL EFFECT CRAFT [Volume 18, Issue 21, 2002, Pages 9-17]
Radpour, S. R. VOLUME FLOW RATE AND BED DEPTH EFFECTS OF CARBON ACTIVE RESIN IN BENZOIC ACID ADSORPTION [Volume 25, No . 50, 2009, Pages 35-39]
Rafati Javidan, M. EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ91 ALLOY [Volume 21, No . 32, 2006, Pages 41-48]
Rafiei, S. Evaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]
Rahimi, A.R. DETERMINATION OF SORPTION ISOTHERM CURVES AND HEAT OF ISOSTRIC FOR WHEAT FLOUR [Volume 24, No . 41, 2008, Pages 13-19]
Rahimian, M. CRACK INTERACTION AFFECTED BY LONGITUDINAL WAVES [Volume 23, No . 37, 2007, Pages 29-35]
Rahmani, H. EVALUATION AND COMPARISON OF STRAIN DISTRIBUTION IN THICK MICROALLOY AND PLAIN CARBON SHEET STEELS [Volume 23, No. 39, 2007, Pages 87-92]
Rahmani Dehagh, M. Comparison of experimental results between using auxetic shoe, conventional shoe and barefoot on the kinematics of vertebral column during drop vertical jump [Volume 39, Issue 1, 2023, Pages 89-98]
Rahmatian, M. MODELING AND ADVANCED EXERGY, EXERGOECONOMIC AND EXERGOENVIRONMENT ANALYSES OF NEW CCHP KALINA CYCLE INTEGRATED WITH SOLAR PARABOLIC TROUGH COLLECTORS [34.3, Issue 2, 2018, Pages 81-93]
Rajabi, M. Three-sphere swimmer in two dimensions at low Reynolds number condition [38.3, Issue 2, 2022, Pages 55-61]
Rashidi, F. COMBINING CONTEXT AND EMOTIONAL TEMPORAL DIFFERENCES LEARNING IN CONTROLS ENGINEERING [Volume 21, No.30, 2005, Pages 13-21]
Rashidi, M. ANALYSIS OF THYRISTOR CONTROLLED SERIES COMPENSATION (TCSC) BEHAVIOR AT SUBSYNCHRONOUS FREQUENCIES AND ITS IMPACT ON DAMPING SUBSYNCHRONOUS RESONANCE (SSR) [Volume 19, No. 25, 2003, Pages 93-99]
Rashidi, S. The concrete shear walls perforated flat [Volume 9, Issue 5, 1993, Pages 85-87]
Rashidian, J. DESIGN AND LARGE - SCALE PRODUCTION OF HUMAN AND NON- HUMAN RECOMBINANT ANTIBODIES USING PHAGE DISPLAY TECHNOLOGY [Volume 16, No . 16, 2000, Pages 45-49]
Reisi, M. Investigating the effect of Texture Intensity on the Forming Limit Diagram of Magnesium Microtubes used in Stents using Crystal Plasticity Finite Element Modeling [Volume 40, Issue 2, 2024, Pages 15-24]
Reyhanian, M. Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
Rezaeian, T. MEASUREMENT AND COMPARISON OF THE NET MOMENTS OF HUMAN JOINTS DURING WEIGHT LIFTING AT DIFFERENT SPEEDS [Volume 23, No . 37, 2007, Pages 81-88]
Rezaey, S. Modeling of a wind energy harvesting INVELOX system by combination of numerical results and semi-analytical framework [38.3, Issue 2, 2022, Pages 37-46]
Rezazadeh, M. Hardware-in-the-loop simulation of a gas turbine engine fuel control unit using model-based predictor [38.3, Issue 1, 2022, Pages 3-12]
Rezazadeh Mofradnia, S. Experimental investigation and analysis of combustion properties and chemical-physical properties of nano-fuel using hybrid nanostructure additives [Volume 39, Issue 1, 2023, Pages 55-67]
Rezazadeh Mofradnia, S. Simulation And Theoretical Analysis Of The Nanofluid-Based Oil Transformers For Improving The Cooling Performance Of The Transformer [Volume 39, Issue 2, 2023, Pages 93-106]
Saadatmanesh, H. Iterative Learning Control to Enhance Accuracy of Repetitive Maneuvers for Aerial Robots [38.3, Issue 2, 2022, Pages 9-19]
Saba, A.R. EFFECT OF RANDOM LOADING ON FATIGUE LIFE OF A STRUCTURAL STEEL [Volume 21, No . 32, 2006, Pages 31-40]
Sabaghian, M. MODELING AND ADVANCED EXERGY, EXERGOECONOMIC AND EXERGOENVIRONMENT ANALYSES OF NEW CCHP KALINA CYCLE INTEGRATED WITH SOLAR PARABOLIC TROUGH COLLECTORS [34.3, Issue 2, 2018, Pages 81-93]
Sabaghzadeghan, F. Reduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]
Sadeghi, A. STUDY OF ORGANIC POLLUTANTS IN TEHRAN GROUND WATER [Volume 25, No . 50, 2009, Pages 9-14]
Sadeghi, A. THERMODYNAMIC AND ECONOMIC OPTIMIZATION OF THE REFRIGERATION SYSTEM IN A BUILDING [35.3, Issue 2, 2019, Pages 107-116]
Sadeghi, H. A review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
Sadeghi, Hamed A Novel Analytical-Statistical-Numerical Framework for Investigating the Thermo-Hydro-Mechanical Behavior of Heterogeneous Subsidence Phenomena, Moisture and Temperature Variations in Cracked Soils Under Soil-Atmosphere Interaction [Volume 41, Issue 1, 2025, Pages 13-28]
Sadeghi, Kh. PERFORMANCE COMPARISON FOR SPECTRAL-BASED DOA ESTIMATION ALGORITHMS AND PROPOSAL OF A HIGH-RESOLUTION AND LOW COMPUTATIONAL COST ALGORITHM [Volume 25, Issue 52, 2010, Pages 63-69]
Sadeghi, M. A NEW METHOD TO OBTAIN THE STABILITY REGION OF A HUMANOID ROBOT [27.3, Issue 1, 2011, Pages 83-88]
Sadeghi, Morteza Dynamic Modeling of the Limb and the Passive Vibration Absorber System With the Aim of Suppressing the Rest Tremor of The Hand [Volume 41, Issue 1, 2025, Pages 83-98]
Sadeghi, S. sh. Numerical Study of Cylinder Drag Coefficient Reduction Using Passive Flow Control [38.3, Issue 2, 2022, Pages 77-86]
Sadeghian, N. Simulation of a Double Slope Solar Still with Rotating External Reflector [37.3, Issue 2, 2021, Pages 21-28]
Sadeghian, N. Investigating the stability of the yield strength of the friction stir welding joint of similar amorphous thermoplastic based on the Ordered Weighted Averaging operators [Volume 40, Issue 2, 2024, Pages 64-75]
Sadeghian, S. EXPERIMENTAL INVESTIGATION AND NUMERICAL ANALYSIS OF NOVEL PROCESS TO PRODUCE OF HIGH STRENGTH BIMETAL TUBES BY RUBBER PAD TUBE STRAINING (RPTS) METHOD [36.3, Issue 1, 2020, Pages 121-131]
Sadeghi boroujeni, p. Boundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 57-63]
Sadeghi Dodaran, R. Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
Sadeghi malekabadi, M. Experimental acoustic study of small horizontal axis wind turbines based on computational fluid dynamics and artificial intelligence approaches [Volume 40, Issue 2, 2024, Pages 52-63]
Sadegh Moghanlou, F. Energy, exergy, and exergoeconomic analysis of power generation cycle based on independent geothermal and solar energy [38.3, Issue 2, 2022, Pages 87-96]
Sadeh, J. FAULT LOCATION IN POWER TRANSMISSION LINES (FREQUENCY DEPENDENT LINE PARAMETERS MODEL) [Volume 17, NO. 20, 2002, Pages 16-23]
Sadeqian Bafqi, S. Prediction of the Hit Probability Under Various Noise Factors to Improve the Guidance Law of an Autonomous Underwater Vehicle [Volume 39, Issue 1, 2023, Pages 15-25]
Sadighi, Ali Edge-Computing-Based Anomaly Detection of Rotating Machines Using Artificial Neural Networks [Volume 41, Issue 2, 2026, Pages 33-47]
Sadqazr, Majid MODELING OF DESIGN DETAILS IN THE FINITE ELEMENT ANALYSIS OF SLAB-BEAM STRUCTURES [Volume 17, No . 19, 2001, Pages 17-21]
Sadr, J. Experimental determination of correction factors from Charpy impact testing of API X65 steel with varying specimen thickness [Volume 40, Issue 1, 2024, Pages 119-127]
Sadraee, S.H. MMP DETERMINATION BY PARACHOR METHOD AND COMPARISON WITH ANALYTICAL METHOD [Volume 25, No . 50, 2009, Pages 25-33]
Sadrameli, S. M. DESIGN AND SETUP OF A COOLING SYSTEM USING PHASE CHANGE MATERIALS (PCMS) FOR THE EFFICIENCY ENHANCEMENT OF SOLAR PANELS [32.3, Issue 1, 2016, Pages 77-82]
Sadri, M. R INFORMATION TECHNOLOGY IN IRAN AND IT S FUTURE IMPACTS [Volume 18, NO. Special ((IT)), 2002, Pages 31-36]
Sadrnezhaad, S. Kh. EFFECT OF THERMAL CYCLING ON TRANSFORMATION TEMPERATURES IN 69/85wt%CU27/08wt%ZN2/29wt%A10/05TI MEMORY ALLOY [Volume 17, No . 19, 2001, Pages 44-49]
Sadrnezhaad, S.Kh. Numerical evaluation of the mechanical performance of intelligent alloy stents under axial loading for application in peripheral artery [38.3, Issue 1, 2022, Pages 13-21]
Saeedi, A.R. DETERMINATION OF SUBSEQUENT YIELD SURFACES USING A COROTATIONAL CONSECUTIVE MODEL FOR RIGID PLASTIC HARDENING MATERIALS [Volume 18, Issue 22, 2002, Pages 3-9]
Saeedi, Hamid EXPERIMENTAL INVESTIGATION OF A PULSE COMBUSTOR FOR INDUSTRIAL APPLICATION [Volume 20, Issue 26, 2004, Pages 65-72]
Saeedi, M. H. A CAE SIMULATION MODEL FOR VEHICLE AIR CONDITIONING SYSTEM [Volume 20, Issue 26, 2004, Pages 43-50]
Saeedi, M.H. A THERMODYNAMIC MODEL TO STUDY THE ENERGY CONSUMPTION OF GAS COOKING OVENS [Volume 20, Issue 26, 2004, Pages 19-25]
Saeedi, M.H. A CAE SIMULATION MODEL FOR THERMAL MODELING OF VEHICLE PASSENGER COMPARTMENT [Volume 21, Issue 29, 2005, Pages 7-12]
Saeediniea, H. INVESTIGATION ON THE EFFECT OF MODIFICATION AND COOLING RATE ON AS5U3G ALUMINUM ALLOY THEROUGH MEASURING ELECTRICAL CONDUCTIVITY [Volume 20, Issue 28, 2004, Pages 15-21]
Saeediniea, S. INVESTIGATION ON THE EFFECT OF MODIFICATION AND COOLING RATE ON AS5U3G ALUMINUM ALLOY THEROUGH MEASURING ELECTRICAL CONDUCTIVITY [Volume 20, Issue 28, 2004, Pages 15-21]
Safaei, R. Fractional Order Sliding Mode Controller (FOSMC) Design for Attitude Control of a Satellite with Coupled Rigid–Flexible Structures Using Fractional Order Transfer Function [Volume 40, Issue 2, 2024, Pages 3-14]
Safaripour, M. H. PREDICTION OF GLOBAL SOLAR RADIATION IN KERMAN USING GEOMETRICAL, ASTRONOMICAL, GEOGRAPHICAL AND
METEOROLOGICAL PARAMETERS [Volume 25, 51.2, 2010, Pages 3-13]
Safarkhanian, M.A. EFFECT OF COPPER AND SOLIDIFICATION RATE ON MECHANICAL PROPERTIES AI-Si-Cu- Mg CASTING ALLOYS [Volume 21, No . 32, 2006, Pages 17-23]
Safdarian, R. NUMERICAL AND EXPERIMENTAL STUDY OF EFFECTIVE PARAMETERS ON THE LOAD AND FORMING TORQUE OF ROLLS IN THE COLD ROLL FORMING OF SYMMETRIC CHANNEL SECTION [32.3, Issue 2, 2016, Pages 91-97]
Saham, S. A Comparative Study of the Aerodynamic Performance and Economic Viability of H-Shape and V-Shape Wind Turbines in the Climate of Zahedan City [Volume 40, Issue 1, 2024, Pages 111-118]
Saham, Sam Numerical study of the effects of different erosion types over blade surface, on the aerodynamic characteristics of a wind turbine via 3D simulations [(Articles in Press)]
Saidi, M. H. THE EFFECT OF VORTEX FLOW IN A HORIZONTAL FRANCIS TURBINE DRAFT TUBE [Volume 24, 46.2, 2009, Pages 119-126]
Sajadi, S.A. A. SYNTHESIS AND STUDY OF MORPHOLOGY OF LEAD OXIDE- SULFATE COMPOUNDS (PbSO4.nPbO) AND INVESTIGATION OF THERMAL DECOMPOSITION OF LEAD SULFATE [Volume 21, Issue 29, 2005, Pages 57-62]
Salami, Hossein Characterization of the Linear Viscoelastic Properties of Materials by the Results of Nanoindentation Test [Volume 41, Issue 1, 2025, Pages 69-81]
Salamizadeh, MohammadFoad Application of Modal Analysis for Health Monitoring of Wind Turbine Blade [(Articles in Press)]
Salari, H. A NEW APPROACH FOR CALCULATION OF PROJECTED RANGE DISTRIBUTIONS OF IMPLANTED IONS IN SEMICONDUCTORS [Volume 21, No.30, 2005, Pages 65-75]
Salari, M. EFFECT OF THERMOMECHANICAL PARAMETERS ON TEXTURE AND ANISOTROPY OF 90-10 BRASS SHEETS [Volume 23, No. 39, 2007, Pages 19-24]
Salarieh, H. SIMULTANEOUS ATTITUDE AND BENDING-TORSIONAL-VIBRATION CONTROL OF A SATELLITE WITH MULTI-SECTION FLEXIBLE PANELS USING PDE BASED BOUNDARY CONTROL-OBSERVER [38.3, Issue 1, 2022, Pages 51-62]
Salarieh, H. Boundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 83-91]
Salehi, Mohammad Numerical Investigating the Effect of the Nozzle on the Uniformity of the Refrigerant Distribution of the Evaporator Distributor [Volume 41, Issue 1, 2025, Pages 43-53]
Salehi, Mohsen Energy Harvesting from a Flapping Hydrofoil with Prescribed Pitch Profile [Volume 41, Issue 1, 2025, Pages 55-68]
Salehi Neyshabouri, S. A.A. Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
Salimi, M. H. THE ROLE OF INDIGENOUS TECHNOLOGY DEVELOPING COOPERATION BETWEEN GOVERNMENT, UNIVERSITIES AND INDUSTRY [Volume 15, No. 17, 1999, Pages 28-34]
Salimi, M.H. PRIORITIES IN SCIENCE AND TECHNOLOGY POLICY [Volume 18, NO. Special ((IT)), 2002, Pages 37-47]
Sanati, M. H. THE IMPORTANCE OF TRANSGENIC LIVING ORGANISMS IN BIOTECHNOLOGY [Volume 16, No . 16, 2000, Pages 23-29]
Sanmi, M. EFFECT OF ARTIFICIAL AGEING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 319 ALUMINUM ALLOY [Volume 21, No . 32, 2006, Pages 3-10]
Sarafraz, Y. Flight Operation Improvement of Variable Pitch Quadrotors with H∞ Optimization and µ Syntheses [34.3, Issue 1, 2018, Pages 63-72]
Saremi, Mohsen THE USE OF ELECTROCHEMICAL NOISE SCC MONITORING OF S.S 304 AND BRASS ALLOYS [Volume 23, No. 39, 2007, Pages 25-30]
Saremian, Salman The Effect of Fixed Blades Installation Angle on the High-Efficiency Operating Range of a Centrifugal Pump asTurbine [Volume 41, Issue 2, 2026, Pages 49-61]
Sarfaraz, L. Prospective information on technology transfer [Volume 9, Issue 5, 1993, Pages 13-19]
Sarkheil, Saeid Enhanced Interfacial Fracture Prediction in Electronic Solder Joints Considering T-Stress under Mixed-Mode I/II Loading [(Articles in Press)]
Sarvghadmoghadam, A. EXPERIMENTAL STUDY OF A ONE SIDED MASONRY WALL REHABILITATION DESIGN FOR EARTHQUAKE DAMAGED BUILDINGS [Volume 23, No . 37, 2007, Pages 3-11]
Sattari, M. MOBAILE MANIPULATOR ROLLOVER RECOVERY BY USING VISION SYSTEM [Volume 23, No . 37, 2007, Pages 59-69]
Sayhvand, Habib l ... NUMERICAL STUDY OF PULSATING FLOW AND HEAT TRANSFER IN A PIPE PARTIALLY FILLED WITH A POROUS MEDIUM [Volume 25, 51.2, 2010, Pages 49-58]
Sayyadi, M. PROCESSING DEFECTS IN HOT POWDER EXTRUSION OF ALUMINUM MATRIX COMPOSITES [Volume 23, No. 39, 2007, Pages 107-114]
Sayyed Noorani, MohammadReza Dynamic Modeling of the Limb and the Passive Vibration Absorber System With the Aim of Suppressing the Rest Tremor of The Hand [Volume 41, Issue 1, 2025, Pages 83-98]
Schaffie, M. PETROLEUM ENGINEERING CALCULATION WITH FUZZY PARAMETERS [Volume 23, No. 39, 2007, Pages 101-106]
Sedighi, K. Oxygenated compounds and gaseous fuels used in vehicles to be used as energy sources in transportation sector [Volume 10, No . 7, 1994, Pages 28-32]
Sedighi, M. THE EFFECT OF RESIDUAL STRESSES ON THE FATIGUE BEHAVIOR OF ROTARY COMPONENTS [Volume 25, 51.2, 2010, Pages 77-83]
Seif, M. S. SHIP MOTIONS SIMULATION USING FINITE VOLUME SOLVER [Volume 24, Issue 42, 2009, Pages 81-88]
Seif, M. S. RUDDER INFLUENCE MODELING IN NUMERICAL SIMULATION OF HIGH SPEED CRAFT [31.3, Issue 1, 2016, Pages 3-13]
Seif, M.S. PREDICTING LONGITUDINAL MOTION OF A PLANING CATAMARAN IN IRREGULAR WATERS [32.3, Issue 1, 2016, Pages 41-55]
Seif, M. INVESTIGATION OF SCALE EFFECT CORRECTION FACTOR IN SHIP RESISTANCE MODEL TEST [Volume 23, 40.2, 2008, Pages 171-176]
Seif, M.S. CALCULATION OF THE HYDRODY NAMIC COEFFICIENTS OF TWO-DIMENSIONAL SHIP SECTIONS [Volume 23, 40.2, 2008, Pages 163-170]
Seif, M.S. AERODYNAMIC PERFOPRMANCE OF A WING MOVING CLOSE TO WATER SURFACE [Volume 20, Issue 26, 2004, Pages 34-42]
Seif, M.S. GEOMETRICAL OPTIMIZATION OF TLPUSING GENETIC ALGORITHM METHOD BASED ON MINIMIZING DOWN TIME UNDER REGULAR SEA WAVES [Volume 21, Issue 31, 2005, Pages 47-56]
Serghini, E. SHAKING TABLE STUDY OF A CONFINED BRICK MASONRY BUILDING [Volume 24, Issue 44, 2008, Pages 29-38]
Seyed Reihani, S. M. THE STUDY OF PRECIPITATION HANDENING OF AN ALUMINIUM - SiCp COMPOSITE [Volume 19, No. 24, 2003, Pages 3-6]
Seyed. Rihani, S. M. EFFECT OF COPPER AND SOLIDIFICATION RATE ON MECHANICAL PROPERTIES AI-Si-Cu- Mg CASTING ALLOYS [Volume 21, No . 32, 2006, Pages 17-23]
Seyedsalehi, M. Numerical evaluation of the mechanical performance of intelligent alloy stents under axial loading for application in peripheral artery [38.3, Issue 1, 2022, Pages 13-21]
Seyed Salehi, S. A. THE EFFECTS OF AUDITORY FEEDBACK ON FUNDAMENTAL FREQUENCY CONTOURS OF FARSI-SPEAKING HEARING-IMPAIRED ADULTS AFTER MULTICHANNEL COCHLEAR IMPLANTATION [Volume 19, No. 25, 2003, Pages 110-119]
Seyf -odin, A.A PRIORITIES IN SCIENCE AND TECHNOLOGY POLICY [Volume 18, NO. Special ((IT)), 2002, Pages 37-47]
Shabani, R. Multi-objective optimization of hydraulic engine mounts vibrational behavior by non-dominated sorting genetic algorithm [37.3, Issue 1, 2021, Pages 49-58]
Shabestari, S. INVESTIGATION ON THE EFFECT OF MODIFICATION AND COOLING RATE ON AS5U3G ALUMINUM ALLOY THEROUGH MEASURING ELECTRICAL CONDUCTIVITY [Volume 20, Issue 28, 2004, Pages 15-21]
Shabestari, S. EFFECT OF ARTIFICIAL AGEING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 319 ALUMINUM ALLOY [Volume 21, No . 32, 2006, Pages 3-10]
Shafiee, M. Engineering education, research opportunities, professors, engineers re-education and training students [Volume 12, No . 13, 1996, Pages 9-12]
Shafiee Alavije, Hamid Design, Manufacturing and Testing of a Cylindrical Vibrating Gyroscope [Volume 41, Issue 1, 2025, Pages 1-11]
Shahani, A. R. FINITE ELEMENT ANALYSIS OF DYNAMIC CRACK GROWTH USING REMESHING TECHNIQUE IN A DCB SPECIMEN UNDER LOADING CONDITIONS OF FIXED-DISPLACEMENT AND FIXED-LOAD [Volume 24, Issue 44, 2008, Pages 73-81]
Shahbazi Karami, J. EXPERIMENTAL INVESTIGATION AND NUMERICAL ANALYSIS OF NOVEL PROCESS TO PRODUCE OF HIGH STRENGTH BIMETAL TUBES BY RUBBER PAD TUBE STRAINING (RPTS) METHOD [36.3, Issue 1, 2020, Pages 121-131]
ShahBeik, Sh. DYNAMIC NON-LINEAR ANALYSIS OF CONCRETE STRUCTURES WITH STEEL BRACING [Volume 17, No . 19, 2001, Pages 33-43]
Shahinpour, M. Approach of polymer gels and artificial muscles of Biomedical Engineering Dygah [Volume 9, Issue 4, 1992, Pages 49-54]
Shahmiri, F. Flight Operation Improvement of Variable Pitch Quadrotors with H∞ Optimization and µ Syntheses [34.3, Issue 1, 2018, Pages 63-72]
Shahmiri, F. Application of Axiomatic Design approach to reduce coupling and repetition in the UCAV conceptual design process [37.3, Issue 2, 2021, Pages 69-79]
Shanechi, H. M. INVESTIGATION OF FAULT LOCATION EFFECT ON THE INTER-AREA OSCILLATIONS IN STRESSED POWER SYSTEMS USING MODAL SERIES METHOD [Volume 25, Issue 52, 2010, Pages 37-46]
Shapourgan, O. EXPERIMENTAL INVESTIGATION AND NUMERICAL ANALYSIS OF NOVEL PROCESS TO PRODUCE OF HIGH STRENGTH BIMETAL TUBES BY RUBBER PAD TUBE STRAINING (RPTS) METHOD [36.3, Issue 1, 2020, Pages 121-131]
Shariyat, M. A SEMI-ANALYTICAL SOLUTION FOR LOW-VELOCITY IMPACT ANALYSIS OF FUNCTIONALLY GRADED RECTANGULAR PLATES [30.3, 2.2, 2014, Pages 67-74]
Shariyat, M. INVESTIGATING THE EFFECTS OF USING PIEZOELECTRIC LAYERS ON THE FREE AND FORCED VIBRATIONS OF FGM PLATES [Volume 25, 51.2, 2010, Pages 33-41]
Shariyat, M. STATIC BUCKLING OF CIRCULAR CYLINDRICAL PIEZOELECTRIC SHELLS BASED ON HIGHER ORDER THEORIES [Volume 23, 40.2, 2008, Pages 93-100]
Shayegan, J. STUDY OF ORGANIC POLLUTANTS IN TEHRAN GROUND WATER [Volume 25, No . 50, 2009, Pages 9-14]
Shayegan, J. MODELING DISSOLVED CONTAMINATION DISPERSION IN GROUNDWATER RESULTING FROM A CONTAMINANT SOURCE HAVING NON-CONSTANT LEAKAGE [Volume 24, No . 41, 2008, Pages 59-64]
Shayegan, J. And wastewater treatment plant in Tehran [Volume 14, No .15, 1999, Pages 58-60]
Sheikhshoaei, A. Three-sphere swimmer in two dimensions at low Reynolds number condition [38.3, Issue 2, 2022, Pages 55-61]
Sheikhzadeh Najar, H. THE EFFECTS OF AUDITORY FEEDBACK ON FUNDAMENTAL FREQUENCY CONTOURS OF FARSI-SPEAKING HEARING-IMPAIRED ADULTS AFTER MULTICHANNEL COCHLEAR IMPLANTATION [Volume 19, No. 25, 2003, Pages 110-119]
Shekari, Y. Numerical Simulation Of Energy Harvesting From A Flexible Plate Behind A Cylinder Using Flow-Induced Vibrations [Volume 39, Issue 2, 2023, Pages 65-74]
Sherafati Zanganeh, M. VIBRATION ANALYSIS OF LAMINATED COMPOSITE PLATES USING SUPER ELEMENTS [Volume 18, Issue 21, 2002, Pages 42-47]
Shiriny, A. Comprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
Shirzadi, M. R. NUMERICAL SOLUTION OF CONJUGATE MIXED CONVECTION AND RADIATION IN A HORIZONTAL ELECTRONIC BOARD
WITH RECTANGULAR HEAT SOURCES [Volume 25, 51.2, 2010, Pages 25-32]
Shirzadi, M.R. NUMERICAL ANALYSIS OF A GEOTHERMAL SNOW-MELTING SYSTEM ON A TYPICAL BRIDGE [Volume 23, 40.2, 2008, Pages 187-193]
Shiva, R. Relationship between budget deficit and trade deficit in [Volume 12, Issue 12, 1997, Pages 45-51]
Shoaee, S. Numerical investigation of affecting parameters on the thermal and dynamic performance of a hot isostatic pressing furnace [38.3, Issue 1, 2022, Pages 85-97]
Shojaeefard, Mohammad Hassan The Effect of Fixed Blades Installation Angle on the High-Efficiency Operating Range of a Centrifugal Pump asTurbine [Volume 41, Issue 2, 2026, Pages 49-61]
Shokouhmand, H. NUMERICAL STUDY OF PULSATING FLOW AND HEAT TRANSFER IN A PIPE PARTIALLY FILLED WITH A POROUS MEDIUM [Volume 25, 51.2, 2010, Pages 49-58]
Shooshtari, A.R. Investigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
Shoulaie, A. POWER / VOLTAGE STABILITY ANALYSIS OF SINGLE –INFEED HVDC SYSTEM IN DIFFERENT CONTROL [Volume 21, No.30, 2005, Pages 41-49]
Simchi, A. ASSESSMENT AND SELECTION OF DIRECT RAPID TOOLING PROCESSES USING ANALYTICAL HIERARCHY PROCESS [Volume 20, Issue 28, 2004, Pages 3-14]
Simchi, A. EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A LASER SINTERED LOW ALLOY STEEL [Volume 23, No. 39, 2007, Pages 61-66]
Simchi, A. ASSESSMENT OF THE INDIRECT RAPID TOOLING METHODS USING ANALYTIC HIERARCHY PROCESS (AHP) [Volume 23, No. 39, 2007, Pages 75-85]
Simchi, A.R. RAPID TOOLING FOR PLASTIC INJECTION MOLDING THROUGH LASER SINTERING OF STELL POWDERS [Volume 19, No. 24, 2003, Pages 27-32]
S. Noorani, S.M.R. WALKING STABILITY ON A SLOPE FOR A PLANAR 3-LINK BIPED ROBOT VIA ORBITAL STABILIZATION UPON A ZERO DYNAMIC MANIFOLD [30.3, 2.2, 2014, Pages 83-95]
Sohankar, A. EXPERIMENTAL INVESTIGATION OF TURBULENT FLOW AROUND A 3D SQUARE CYLINDER WITH WALL EFFECT [30.3, Issue 1, 2014, Pages 65-77]
Sohrabi, M. CATALYST SYNTHESIS, CONSTRUCTION AND MODELING OF FLUIDIZED BED REACTORS FOR OXIDIZING METHANOL TO
FORMALDEHYDE [Volume 24, No . 41, 2008, Pages 3-8]
Sohrab Poor, S. A COROTATIONAL CONSTITUTIVE MODEL FOR LARGE PLASTIC DEFORMATION ANALYSIS OF HARDENING MATERIALS [Volume 18, Issue 21, 2002, Pages 3-8]
Soleimanimehr, H. Effect of vibration amplitude and temperature on the shape and size of aluminum powder produced by ultrasonic atomizer process [Volume 39, Issue 1, 2023, Pages 25-45]
Soltani, M. EXPERIMENTAL INVESTIGATION OF UNSTEADY BOUNDARY LAYER OVER A SUPERCRITICAL AIRFOIL [32.3, Issue 2, 2016, Pages 41-52]
Soltani, M. R. EXPERIMENTAL METHODS AND NEURAL NETWORK [Volume 24, 46.2, 2009, Pages 135-142]
Soltani, M. R. EXPERIMENTAL STUDY OF SWIRL SPRAY PATTERN [Volume 21, Issue 29, 2005, Pages 37-46]
Soltani, M. R. AN EXPERIMENTAL STUDY OF THE WORTEX STRUCTURE OVER DELTA WINGS [Volume 17, No . 19, 2001, Pages 3-10]
Soltani, M.R. AN INVESTIGATION OF THE AERODYNAMIC CHARACTERISTICS OF SUPERSONIC WRAPAROUND FIN MISSILES USING NUMERICAL SIMULATION AND WIND TUNNEL EXPERIMENTS [Volume 18, Issue 21, 2002, Pages 31-36]
Soltani, M.R. EFFECT OF SURFACE ROUGHNESS ON THE AERODYNAMIC PERFORMANCE OF A SECTION OF A WIND TURBINE BLADE [Volume 23, No . 37, 2007, Pages 49-58]
Soltani, M.R. AN EXPERIMENTAL INVESTIGATION OF THE EFFECTS OF COMPRESSIBILITY AND REDUCED FREQUENCY ON THE UNSTEADY AERODYNAMIC BEHAVIOR OF A FIGHTER MODEL [Volume 21, Issue 31, 2005, Pages 39-46]
Soudbakhsh, D. MEASUREMENT AND COMPARISON OF THE NET MOMENTS OF HUMAN JOINTS DURING WEIGHT LIFTING AT DIFFERENT SPEEDS [Volume 23, No . 37, 2007, Pages 81-88]
Souri, M. NUMERICAL STUDY OF AERODYNAMIC NOISE REDUCTION ON A SQUARE CYLINDER USING SPLITTER [35.3, Issue 2, 2019, Pages 79-87]
Tabatabaei Oreh, S. H. A NEW METHOD FOR MANEUVERABILITY IMPROVEMENT OF ARTICULATED HEAVY VEHICLES [31.3, Issue 1, 2016, Pages 41-53]
Tabeshpour, M. R GEOMETRICAL OPTIMIZATION OF TLPUSING GENETIC ALGORITHM METHOD BASED ON MINIMIZING DOWN TIME UNDER REGULAR SEA WAVES [Volume 21, Issue 31, 2005, Pages 47-56]
Tabibian, M. Economic and social aspects of technology transfer [Volume 9, Issue 4, 1992, Pages 5-10]
Tabrizian, A. EXPERIMENTAL INVESTIGATION OF UNSTEADY BOUNDARY LAYER OVER A SUPERCRITICAL AIRFOIL [32.3, Issue 2, 2016, Pages 41-52]
Tacdghi, D. National and Public Information [Volume 9, Issue 5, 1993, Pages 76-78]
Taei, H. DESIGN AND DEVELOPMENT OF A COLD GAS THRUSTER SYSTEM FOR USE IN A TRI-AXIAL SATELLITE IMULATOR [30.3, 2.2, 2014, Pages 119-131]
Taghipoor, M. Numerical investigation of affecting parameters on the thermal and dynamic performance of a hot isostatic pressing furnace [38.3, Issue 1, 2022, Pages 85-97]
Taghirad, H. D. MOBILE ROBOT SEMANTIC MAPPING USING HISTOGRAM BASED FRONTIER EXPLORATION [30.3, Issue 1, 2014, Pages 115-124]
Tahani, M. INTERLAMINAR STRESS ANALYSIS IN A ROTATING COMPOSITE BEAM [Volume 17, NO. 20, 2002, Pages 24-31]
Tahani, M. STRESS FIELD NEAR THE EDGES OF SYMMETRIC BALANCED COMPOSITE LAMINATES [Volume 20, Issue 26, 2004, Pages 10-18]
Taheri, A.R. Proposing an empirical motion-time pattern for human gaze behavior in different social situations [Volume 40, Issue 1, 2024, Pages 3-13]
Taheri, P. STUDY OF EFFECTIVE PARAMETERS ON CORROSION RESISTANCE OF PLASMA ELECTROLYTIC NITROCARBURISED 316L AUESTENITIC STAINLESS STEEL [Volume 23, No. 39, 2007, Pages 67-73]
Taheri Karimi, A. THE EFFECT OF MOLD VIBRATION ON THE MICROSTRUCTURE ON THE MICROSTRUCTURE OF AL7075 THIXOFORMING BILLET PRODUCED BY THE COOLING SLOPE TECHNIQUE [Volume 23, No. 39, 2007, Pages 53-59]
Taher Khani, M. CELLULAR LEARNING AUTOMATA AND ITS APPLICATIONS [Volume 19, No. 25, 2003, Pages 54-77]
Tahvildarzadeh, D. CALCULATION OF THE HYDRODY NAMIC COEFFICIENTS OF TWO-DIMENSIONAL SHIP SECTIONS [Volume 23, 40.2, 2008, Pages 163-170]
Tajik, A. A REVIEW OF DUST REMOVAL METHODS FROM THE SURFACE OF PHOTOVOLTAIC PANELS [35.3, Issue 2, 2019, Pages 117-127]
Tajik Jamal-Abad, M. EXPERIMENTAL STUDY ON FORCE CONVECTION OF A NANOFLUID IN A SPIRAL TUBE [31.3, Issue 2, 2015, Pages 59-66]
Tajrishi, M. STUDY OF WIND EFFECTS ON FREE WATER SURFACE EVAPORATION FROM CHAHNIMEH RESERVOIR IN SISTAN, USING THE DALTONIAN METHOD [Volume 23, No . 37, 2007, Pages 13-20]
Tajrishi, M. - [Volume 14, No .15, 1999, Pages 19-23]
Tajrshi, M. Firouzabad Creek, you can take it as a source of water for irrigation? [Volume 14, No .15, 1999, Pages 31-38]
Taktaz, N. A PREDICTIVE PATTERN FOR IRON AND STEEL PRODUCTION IN IRAN [Volume 17, No . 19, 2001, Pages 57-64]
Taleb Bidakhti, N. Priorities of the Environment and Sustainable Development in Iran [Volume 14, No .15, 1999, Pages 10-18]
Taleb Bidokhti, N. WATER CRISIS ANALYSIS WITH A GLANCE AT THE ENVIRONMENTAL IMPACT ASSESSMENT AND WATERSHED MANAGEMENT IN IRAN [Volume 17, No . 19, 2001, Pages 22-32]
Taleghani, A. S. RELIABILITY BASED LAUNCH VEHICLE CONCEPTUAL DESIGN (RLVCD) [30.3, Issue 1, 2014, Pages 55-64]
Tamanaee, E. Recognizing Acceptance Level in Facial Expressions by Neural Network [37.3, Issue 2, 2021, Pages 13-20]
Tamayol, A. NUMERICAL INVESTIGATION OF INLET BAFFLE FEATURES EFFECTS ON THE HYDRAULIC PERFORMANCE OF PRIMARY SETTLING TANKS [Volume 23, 40.2, 2008, Pages 109-114]
Tarahomjou, SH. CHARACTERISTICS AND APPLICATION OF BIOSURFACTANTS [Volume 17, NO. 20, 2002, Pages 50-53]
Tariverdilo, S. Multi-objective optimization of hydraulic engine mounts vibrational behavior by non-dominated sorting genetic algorithm [37.3, Issue 1, 2021, Pages 49-58]
Tavakol, M. The social aspects of technology transfer and [Volume 8, Issue 3, 1992, Pages 16-19]
Tayeb, S. A. DESIGNING OF TOTAL ACCOUNTING SYSTEM AS A KEY TOOL IN MANAGEMENT INFORMATION SYSTEM [Volume 19, No. 24, 2003, Pages 69-73]
Tayebi, A. Numerical Simulation Of Energy Harvesting From A Flexible Plate Behind A Cylinder Using Flow-Induced Vibrations [Volume 39, Issue 2, 2023, Pages 65-74]
Tayebi Rahni, M. NUMERICAL SIMULATION OF A TURBULENT FILM COOLING FLOW USING STANDARD "K-3" AND "SHEAR STERESS TRANSPORT" MODELS [Volume 18, Issue 22, 2002, Pages 59-65]
Tooyserkani, Z. STUDY OF ORGANIC POLLUTANTS IN TEHRAN GROUND WATER [Volume 25, No . 50, 2009, Pages 9-14]
Torbatinegad, N. SUGAR BEET PULP, DETERMINATION AND DRYING [Volume 24, No . 41, 2008, Pages 9-12]
Torkamani, S. MODELING DISSOLVED CONTAMINATION DISPERSION IN GROUNDWATER RESULTING FROM A CONTAMINANT SOURCE HAVING NON-CONSTANT LEAKAGE [Volume 24, No . 41, 2008, Pages 59-64]
Toulabi, Sobhan Modeling and Simulation of 18-Degree-of-Freedom Flight Dynamics of a Dragonfly-Inspired Micro Aerial Vehicle Considering Quasi-Steady Aerodynamics [Volume 41, Issue 2, 2026, Pages 107-125]
Turkian, A. THE EFFECT OF ORGANIC LOADING RATE ON THE BIOLOGICAL REMOVAL OF TOLUENE AND XYLENE FROM CONTAMINATED GAS STREAMS [Volume 20, Issue 26, 2004, Pages 82-87]
Turkian, A. PERFORMANCE COMPARISON OF HORIZONTAL- FLOW ANAEROBIC IMMOBILIZED SLUDGE (HAIS) AND UASB REACTORS USING A SYNTHETIC SUBSTRATE [Volume 21, Issue 29, 2005, Pages 63-70]
Vahabzadeh, F. PATTERN OF THEAFLAVIN CHANGES IN IRANIAN BLACK TEA-EVALUATION OF THE CTC AND CONVENTIONAL PROCESS IN THE ROLLING OF GREEN TEA LEAVES [Volume 21, No . 32, 2006, Pages 49-56]
Vajdi, M. Energy, exergy, and exergoeconomic analysis of power generation cycle based on independent geothermal and solar energy [38.3, Issue 2, 2022, Pages 87-96]
Vakilipour, Sh. Developing an Interface Tracking Coupled Solver for Solving two Phase Flow Fields at Low Reynolds Numbers in foam-extend Platform [Volume 40, Issue 1, 2024, Pages 97-110]
Valipour, S. A THERMODYNAMIC MODEL TO STUDY THE ENERGY CONSUMPTION OF GAS COOKING OVENS [Volume 20, Issue 26, 2004, Pages 19-25]
Vali Pour, S. A NUMERICAL ANALYSIS OF THE ROLE OF IMPORTANT PARAMETERS IN THE GROUTING PROCESS IN DISCONTINUOUS ROCK MASSES [Volume 23, No. 39, 2007, Pages 93-100]
Varhram, N. EFFECT OF COPPER AND SOLIDIFICATION RATE ON MECHANICAL PROPERTIES AI-Si-Cu- Mg CASTING ALLOYS [Volume 21, No . 32, 2006, Pages 17-23]
Vatani, A. OPTIMIZATION OF OXIDATIVE COUPLING OF METHANE OVER PEROVSKITE CATALYST AND OCM KINETICS MODELING BY GENETIC ALGORITH [Volume 25, No . 50, 2009, Pages 15-24]
Vesal Shirazi, K. Position of Research in Medical Sciences [Volume 15, No. 16, 1999, Pages 53-60]
V.GHazvini, H. SYSTEMATIC APPROACH FOR ANALYSIS OF UNIVERSITY-INDUSTRY RELATION IN IRAN [Volume 17, NO. 20, 2002, Pages 50-61]
Vosoughi, M. SOME MICROBIAL OBSERVATION IN NITRIFICATION AND DENITRIFICATION PROCESS USING MOVING BED BIOFILM REACTOR (MBBR) [Volume 20, Issue 28, 2004, Pages 43-48]
Vosoughi, M. ENVIRONMENTAL BIOTECHNOLOGY [Volume 16, No . 16, 2000, Pages 7-16]
Vossoughi, G. R. MODELING AND MOVING OBJECT TRACKING CONTROL OF A THREE LINK ROBOTIC FISH [30.3, 2.1, 2014, Pages 77-89]
Vossoughi, Gh. Boundary Feedback Trajectory Tracking Control Of Rigid Bodies With Interior Shallow-Water Sloshing [Volume 39, Issue 2, 2023, Pages 57-63]
Vossoughi, M. EFFECT OF LOADING RATE AND ENVIRONMENTAL CONDITIONS ON BIOLOGICAL REMOVAL OF TOLUENE IN AN ANAEROBIC SYSTEM [Volume 19, No. 24, 2003, Pages 58-61]
Yaghmaee, S. BIOTREATMENT OF WASTEWATER FROM DAIRY PROCESSING PLANTS [Volume 24, No . 41, 2008, Pages 53-58]
Yaghmaei, S. MODELING THE GROWTH KINETIC OF YEAST BBRC-9026 ON PHENOL [Volume 25, No . 50, 2009, Pages 3-8]
Yaghmaei, S. CANTALOUPE (SAMSORY) JUICE PRODUCTION AND SENSOTY EVALUATION OF THE JUICE [Volume 20, Issue 28, 2004, Pages 61-64]
Yaghootian, A. STATIC BUCKLING OF CIRCULAR CYLINDRICAL PIEZOELECTRIC SHELLS BASED ON HIGHER ORDER THEORIES [Volume 23, 40.2, 2008, Pages 93-100]
Yaghoubinezhad, Yadollah Investigation of the Microstructure and Microhardness of Inconel 792 Superalloy After Laser Shock Peening [Volume 41, Issue 1, 2025, Pages 99-110]
Yazdanshenas shad, B. DESIGN AND IDENTIFICATION OF A SIX DEGREE OF FREEDOM HEXAPOD ROBOT [Volume 25, 48.2, 2009, Pages 93-106]
Yeganeh, M. DETERMINATION OF SUBSEQUENT YIELD SURFACES USING A COROTATIONAL CONSECUTIVE MODEL FOR RIGID PLASTIC HARDENING MATERIALS [Volume 18, Issue 22, 2002, Pages 3-9]
Yosefpour, H. Neural networks are a powerful tool for analyzing structures Pralman (2) [Volume 11, Issue 11, 1996, Pages 97-78]
Yousefi, E. STATISTICAL CORRELATION FUNCTIONS AND RECONSTRUCTION OF MICRO NANOCOMPOSITES; A REVIEW [34.3, Issue 2, 2018, Pages 31-40]
Zabihi, Z. Investigation Of The Effect Of Shape Memory Alloy On Buckling And Post-Buckling Of Composite Panels In Supersonic Flow With Thermal Heating [Volume 39, Issue 2, 2023, Pages 3-11]
Zahiraazmy, S.B. And an encoding designed to simulate a real-time LPC [Volume 9, Issue 4, 1992, Pages 55-59]
Zahiri Bashman, F. CATALYST SYNTHESIS, CONSTRUCTION AND MODELING OF FLUIDIZED BED REACTORS FOR OXIDIZING METHANOL TO
FORMALDEHYDE [Volume 24, No . 41, 2008, Pages 3-8]
Zamani, J. SIMULATION OF EXPANSION AND FRAGMENTATION OF A CYLINDRICAL SHELL SUBJECTED TO INTERNAL DETONATION BY
THE SMOOTHED PARTICLE HYDRODYNAMICS METHOD [32.3, Issue 1, 2016, Pages 29-39]
Zamani, M.S. Prediction of the Hit Probability Under Various Noise Factors to Improve the Guidance Law of an Autonomous Underwater Vehicle [Volume 39, Issue 1, 2023, Pages 15-25]
Zamani Nejad, M. THERMO-ELECTRO-MECHANICAL ANALYSIS OF CYLINDRICAL SHELL MADE OF FUNCTIONALLY GRADED PIEZOELECTRIC
MATERIALS USING ARBITRARY HIGHER-ORDER SHEAR DEFORMATION THEORY [34.3, Issue 1, 2018, Pages 125-135]
Zamzamian, A. EXPERIMENTAL STUDY ON FORCE CONVECTION OF A NANOFLUID IN A SPIRAL TUBE [31.3, Issue 2, 2015, Pages 59-66]
Zamzamian, A.H. ANALYSIS OF EFFECTIVE PARAMETERS ON A ROTARY DESICCANT WHEEL PERFORMANCE [Volume 23, 40.2, 2008, Pages 155-162]
Zamzamian, S. A. H. Simulation And Theoretical Analysis Of The Nanofluid-Based Oil Transformers For Improving The Cooling Performance Of The Transformer [Volume 39, Issue 2, 2023, Pages 93-106]
Zamzamian, S. A.H. Experimental investigation and analysis of combustion properties and chemical-physical properties of nano-fuel using hybrid nanostructure additives [Volume 39, Issue 1, 2023, Pages 55-67]
Zandi, M. A REVIEW OF DUST REMOVAL METHODS FROM THE SURFACE OF PHOTOVOLTAIC PANELS [35.3, Issue 2, 2019, Pages 117-127]
Zareh, M. EXPERIMENTAL STUDY OF THE EFFECT OF SURFACE TYPE ON THE POOL BOILING HEAT TRANSFER CHARACTERISTICS IN THE PRESENCE OF NANOFLUIDS WITH HYBRID BASE FLUID [36.3, Issue 2, 2020, Pages 83-95]
Zolghadri, M. R. A NEW SCHEME FOR SPACE VECTOR MODULATION FOR THREE PHASE HARMONIC GENERATORS [Volume 19, No. 25, 2003, Pages 78-85]
Zolghadri, M.R. A NOVEL CONTROL STRATEGY FOR POWER SYSTEM STABILITY IMPROVEMENT USING FUZZY LOGIC CONTROLLED STATCOM WITH DIFFERENT INPUT SIGNALS [Volume 25, Issue 52, 2010, Pages 47-56]
Zrasund Asadi, R. Computer simulation of wastewater Tsfyhkhanhhay [Volume 14, No .15, 1999, Pages 46-54]
